mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
584d7c53bd
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
49 lines
1.4 KiB
Diff
49 lines
1.4 KiB
Diff
From e8d66e7927b2a15310df0eb44a67d120ea147a59 Mon Sep 17 00:00:00 2001
|
|
From: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
Date: Thu, 14 Dec 2017 16:00:06 +0100
|
|
Subject: arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq
|
|
support
|
|
|
|
In order to be able to use cpu freq, we need to associate a clock to each
|
|
CPU and to expose the power management registers.
|
|
|
|
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
---
|
|
arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 +
|
|
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 +++++++
|
|
2 files changed, 8 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
|
|
@@ -56,6 +56,7 @@
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53","arm,armv8";
|
|
reg = <0x1>;
|
|
+ clocks = <&nb_periph_clk 16>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
|
|
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
|
|
@@ -64,6 +64,7 @@
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0>;
|
|
+ clocks = <&nb_periph_clk 16>;
|
|
enable-method = "psci";
|
|
};
|
|
};
|
|
@@ -219,6 +220,12 @@
|
|
};
|
|
};
|
|
|
|
+ nb_pm: syscon@14000 {
|
|
+ compatible = "marvell,armada-3700-nb-pm",
|
|
+ "syscon";
|
|
+ reg = <0x14000 0x60>;
|
|
+ };
|
|
+
|
|
pinctrl_sb: pinctrl@18800 {
|
|
compatible = "marvell,armada3710-sb-pinctrl",
|
|
"syscon", "simple-mfd";
|