openwrt/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
Adrian Schmutzler e7bfda2c24 brcm63xx: rename target to bcm63xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-14 14:10:51 +01:00

73 lines
1.9 KiB
Diff

From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Thu, 3 May 2012 14:40:03 +0200
Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 9 ++++++++-
arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 10 ++++++++++
2 files changed, 18 insertions(+), 1 deletion(-)
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
@@ -31,6 +31,7 @@
#include <bcm63xx_dev_usb_ohci.h>
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
+#include <pci_ath9k_fixup.h>
#include "board_common.h"
@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = {
int __init board_register_devices(void)
{
int usbh_ports = 0;
+ int i;
#if CONFIG_OF
if (of_have_populated_dt()) {
@@ -241,6 +243,10 @@ int __init board_register_devices(void)
board.ephy_reset_gpio_flags);
}
+ /* register any fixups */
+ for (i = 0; i < board.has_caldata; i++)
+ pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
+
return 0;
}
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -9,6 +9,7 @@
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_usb_usbd.h>
#include <bcm63xx_fallback_sprom.h>
+#include <pci_ath9k_fixup.h>
/*
* flash mapping
@@ -16,6 +17,11 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
+struct ath9k_caldata {
+ unsigned int slot;
+ u32 caldata_offset;
+};
+
/*
* board definition
*/
@@ -33,6 +39,10 @@ struct board_info {
unsigned int has_ehci0:1;
unsigned int has_usbd:1;
unsigned int use_fallback_sprom:1;
+ unsigned int has_caldata:2;
+
+ /* wifi calibration data config */
+ struct ath9k_caldata caldata[2];
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;