mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
eb13076e77
The upstream solution to define the MDIO bus in DT is a bit more strict than our previous downstream solution doing the same thing and now requires switch PHYs to be referenced in DT as well. Arınç Ünal told us in #15141: "With [the now upstream patch written by him which we backported], the switch MDIO bus won't be assigned to ds->user_mii_bus when the switch MDIO bus is defined on the device tree anymore. This was not the case with the downstream patch. When ds->user_mii_bus is populated, DSA will 1:1 map the port with PHY. Meaning port with address 1 will be mapped to PHY with address 1. Because that ds->user_mii_bus is not populated when the switch MDIO bus is defined on the device tree, on every port node, the PHY address must be supplied by the phy-handle property." Add those phy-handles to affected devices' DT. Fixes:4354b34f6f("generic: 6.6: sync mt7530 DSA driver with upstream") Fixes:401a6ccfaf("generic: 6.1: sync mt7530 DSA driver with upstream") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
416 lines
7.6 KiB
Plaintext
416 lines
7.6 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "ASUS TUF-AX4200";
|
|
compatible = "asus,tuf-ax4200", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
label-mac-device = &gmac0;
|
|
led-boot = &led_system;
|
|
led-failsafe = &led_system;
|
|
led-running = &led_system;
|
|
led-upgrade = &led_system;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-override = "";
|
|
};
|
|
|
|
memory {
|
|
reg = <0 0x40000000 0 0x20000000>;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
mesh {
|
|
label = "wps";
|
|
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
wlan24 {
|
|
label = "white:wlan24";
|
|
gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
wlan5 {
|
|
label = "white:wlan5";
|
|
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
led_system: system {
|
|
label = "white:system";
|
|
gpios = <&pio 11 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan-red {
|
|
function = LED_FUNCTION_WAN;
|
|
color = <LED_COLOR_ID_RED>;
|
|
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
/* LAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
nvmem-cells = <&macaddr_factory_4>;
|
|
nvmem-cell-names = "mac-address";
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
/* WAN */
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy6>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy6: phy@6 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <6>;
|
|
|
|
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
|
|
/* LED0: CONN (WAN white) */
|
|
mxl,led-config = <0x03f0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
|
|
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
spi_flash_pins: spi-flash-pins-33-to-38 {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
conf-pu {
|
|
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
|
drive-strength = <8>;
|
|
mediatek,pull-up-adv = <0>; /* bias-disable */
|
|
};
|
|
conf-pd {
|
|
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
|
drive-strength = <8>;
|
|
mediatek,pull-down-adv = <0>; /* bias-disable */
|
|
};
|
|
};
|
|
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
wf_dbdc_pins: wf-dbdc-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_dbdc";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_flash_pins>;
|
|
status = "okay";
|
|
|
|
spi_nand_flash: flash@0 {
|
|
compatible = "spi-nand";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <20000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
/*
|
|
* ASUS bootloader tries to replace the partitions defined in
|
|
* Device Tree and by that also deletes all additional properties
|
|
* needed for UBI and NVMEM-on-UBI.
|
|
* Prevent this from happening by tricking the loader to delete and
|
|
* replace a bait node instead.
|
|
*/
|
|
partitions: dummy {
|
|
compatible = "u-boot-dummy-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x0>;
|
|
label = "remove_me";
|
|
};
|
|
};
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x400000>;
|
|
label = "bootloader";
|
|
read-only;
|
|
};
|
|
|
|
partition@400000 {
|
|
compatible = "linux,ubi";
|
|
reg = <0x400000 0xfc00000>;
|
|
label = "UBI_DEV";
|
|
|
|
volumes {
|
|
ubi_factory: ubi-volume-factory {
|
|
volname = "Factory";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ubi_factory {
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_4: macaddr@4 {
|
|
reg = <0x4 0x6>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&swphy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&swphy2>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&swphy3>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
phy-handle = <&swphy4>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
swphy1: phy@1 {
|
|
reg = <1>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy2: phy@2 {
|
|
reg = <2>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy3: phy@3 {
|
|
reg = <3>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
|
|
swphy4: phy@4 {
|
|
reg = <4>;
|
|
|
|
mediatek,led-config = <
|
|
0x21 0x8009 /* BASIC_CTRL */
|
|
0x22 0x0c00 /* ON_DURATION */
|
|
0x23 0x1400 /* BLINK_DURATION */
|
|
0x24 0x8000 /* LED0_ON_CTRL */
|
|
0x25 0x0000 /* LED0_BLINK_CTRL */
|
|
0x26 0xc007 /* LED1_ON_CTRL */
|
|
0x27 0x003f /* LED1_BLINK_CTRL */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
pinctrl-1 = <&wf_dbdc_pins>;
|
|
pinctrl-names = "default", "dbdc";
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_5v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|