openwrt/target/linux/ipq40xx/base-files/etc
Alar Aun 70eedac9b3 ipq40xx: add MikroTik cAP ac support
This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD
(cAP ac), a  indoor dual band, dual-radio 802.11ac wireless AP, two
10/100/1000 Mbps Ethernet ports.

See https://mikrotik.com/product/cap_ac for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 128 MB
 - Storage: 16 MB NOR
 - Wireless:
   · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
   · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port,
   PoE in and passive PoE out

Unsupported:
 - PoE out

Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"

Signed-off-by: Alar Aun <alar.aun@gmail.com>
2022-02-01 23:18:58 +01:00
..
board.d ipq40xx: add MikroTik cAP ac support 2022-02-01 23:18:58 +01:00
hotplug.d/firmware ipq40xx: add MikroTik cAP ac support 2022-02-01 23:18:58 +01:00
init.d ipq40xx: add netgear wac510 support 2021-06-05 23:29:46 +02:00
uci-defaults ipq40xx: unbreak EZVIZ CS-W3-WD1200G EUP on 5.10 2021-12-04 00:36:47 +01:00
inittab ipq40xx: add support for Aruba AP-303 2019-12-20 17:48:52 +01:00