openwrt/target/linux/ath79
Paul Fertser 4d36569b9c ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devices
According to forum threads [0][1] and a report on IRC by Doc-Saintly
some of those boards have calibration data in a different place. Only
one alternative location is known.

Without proper board calibration data (board.bin having all 0xff bytes)
ath10k firmware still tries to load but crashes on startup with a
confusing error message.

If you're applying this patch manually on your device do not forget to
remove /lib/firmware/ath10k/pre-cal-pci-0000:00:00.0.bin and reboot to
force caldata re-extraction.

[0] https://forum.openwrt.org/t/support-for-d-link-dir842-rev-c3/41654
[1] https://forum.openwrt.org/t/d-link-dir-842-cant-access-firmware-upload-form/65454

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2020-11-16 14:05:24 +01:00
..
base-files/etc/hotplug.d/ieee80211 ath79: add WiFi migration for AR913x 2020-09-28 16:23:03 +02:00
dts ath79: add support for Qxwlan E600G v2 / E600GAC v2 2020-11-12 17:18:26 +01:00
files target: remove obsolete kernel version switches for 4.19 2020-10-30 19:45:24 +01:00
generic ath79: fix ath10k caldata extraction on some D-Link DIR-842 C3 devices 2020-11-16 14:05:24 +01:00
image ath79: add support for Qxwlan E600G v2 / E600GAC v2 2020-11-12 17:18:26 +01:00
mikrotik ath79: remove AT803X config symbol from subtargets 2020-11-01 15:29:58 +01:00
nand ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
patches-5.4 ath79: drop upstreamed patch 2020-11-01 15:29:06 +01:00
tiny ath79: remove model name from LED labels 2020-10-02 13:51:39 +02:00
config-5.4 ath79: enable elf mtd splitter 2020-09-09 20:41:50 +03:00
Makefile ath79: enable usbgadget feature 2020-09-28 01:28:37 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00