mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
4cf3fd49fc
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to indicate the current boot state. This patch adds support for such cases. The existing led sequences should be the same as before. Boards which are using a led different from power (like TDW89x0) are changed to switch of the led after boot Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48041
331 lines
7.0 KiB
Plaintext
331 lines
7.0 KiB
Plaintext
/include/ "vr9.dtsi"
|
|
|
|
/ {
|
|
|
|
model = "VGV7519 - KPN Experiabox V8";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
|
|
|
|
leds {
|
|
boot = &power2;
|
|
failsafe = &power;
|
|
running = &power2;
|
|
|
|
dsl = &broadband_yellow;
|
|
internet = &internet_yellow;
|
|
wifi = &wireless_yellow;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
reg = <0x0 0x4000000>;
|
|
};
|
|
|
|
fpi@10000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,fpi", "simple-bus";
|
|
ranges = <0x0 0x10000000 0xEEFFFFF>;
|
|
reg = <0x10000000 0xEF00000>;
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,localbus", "simple-bus";
|
|
};
|
|
|
|
gpio: pinmux@E100B10 {
|
|
compatible = "lantiq,pinctrl-xr9";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <166 135 66 40 41 42 38>;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0xE100B10 0xA0>;
|
|
|
|
state_default: pinmux {
|
|
stp {
|
|
lantiq,groups = "stp";
|
|
lantiq,function = "stp";
|
|
};
|
|
spi {
|
|
lantiq,groups = "spi";
|
|
lantiq,function = "spi";
|
|
};
|
|
mdio {
|
|
lantiq,groups = "mdio";
|
|
lantiq,function = "mdio";
|
|
};
|
|
gphy-leds_out {
|
|
lantiq,pins = "io7", "io44";
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
stp_out {
|
|
lantiq,pins = "io4", "io5", "io6";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,output = <1>;
|
|
lantiq,pull = <0>;
|
|
};
|
|
pci-rst {
|
|
lantiq,pins = "io21";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
gphy-leds {
|
|
lantiq,groups = "gphy0 led1", "gphy1 led0";
|
|
lantiq,function = "gphy";
|
|
lantiq,open-drain = <0>;
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
eth@E108000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-net";
|
|
reg = < 0xE108000 0x3000 /* switch */
|
|
0xE10B100 0x70 /* mdio */
|
|
0xE10B1D8 0x30 /* mii */
|
|
0xE10B308 0x30 /* pmac */
|
|
>;
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <73 72>;
|
|
|
|
lan: interface@0 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
mac-address = [ 00 11 22 33 44 55 ];
|
|
|
|
ethernet@0 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <0>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
ethernet@1 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <1>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
ethernet@2 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <2>;
|
|
phy-mode = "gmii";
|
|
phy-handle = <&phy11>;
|
|
};
|
|
ethernet@4 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <4>;
|
|
phy-mode = "gmii";
|
|
phy-handle = <&phy13>;
|
|
};
|
|
};
|
|
|
|
wan: interface@1 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
mac-address = [ 00 11 22 33 44 56 ];
|
|
lantiq,wan;
|
|
ethernet@5 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <5>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
};
|
|
|
|
mdio@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy5: ethernet-phy@5 {
|
|
reg = <0x5>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy11: ethernet-phy@11 {
|
|
reg = <0x11>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
phy13: ethernet-phy@13 {
|
|
reg = <0x13>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
lantiq,c45-reg-init = <1 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
stp: stp@E100BB0 {
|
|
compatible = "lantiq,gpio-stp-xway";
|
|
reg = <0xE100BB0 0x40>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
lantiq,shadow = <0xffff>;
|
|
lantiq,groups = <0x3>;
|
|
lantiq,dsl = <0x0>;
|
|
lantiq,phy1 = <0x0>;
|
|
lantiq,phy2 = <0x0>;
|
|
/* lantiq,rising; */
|
|
};
|
|
|
|
ifxhcd@E101000 {
|
|
status = "okay";
|
|
gpios = <&gpio 32 0>;
|
|
lantiq,portmask = <0x3>;
|
|
};
|
|
|
|
pci@E105400 {
|
|
status = "okay";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "lantiq,pci-xway";
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
|
|
reg = <0x7000000 0x8000 /* config space */
|
|
0xE105400 0x400>; /* pci bridge */
|
|
lantiq,bus-clock = <33333333>;
|
|
/*lantiq,external-clock;*/
|
|
lantiq,delay-hi = <0>; /* 0ns delay */
|
|
lantiq,delay-lo = <0>; /* 0.0ns delay */
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
|
|
>;
|
|
gpio-reset = <&gpio 21 0>;
|
|
req-mask = <0x1>; /* GNT1 */
|
|
};
|
|
|
|
pcie@d900000 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gphy-xrx200 {
|
|
compatible = "lantiq,phy-xrx200";
|
|
firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
|
|
firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
|
|
phys = [ 00 01 ];
|
|
};
|
|
|
|
ralink_eep {
|
|
compatible = "ralink,eeprom";
|
|
ralink,eeprom = "RT2860.eeprom";
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 9 1>;
|
|
linux,code = <0x198>;
|
|
};
|
|
eco {
|
|
label = "eco";
|
|
gpios = <&gpio 41 1>;
|
|
linux,code = <247>;
|
|
};
|
|
rfkill {
|
|
label = "rfkill";
|
|
gpios = <&gpio 45 1>;
|
|
linux,code = <0xf7>;
|
|
};
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 10 1>;
|
|
linux,code = <0x211>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
eco { /* blue */
|
|
label = "eco";
|
|
gpios = <&stp 2 1>;
|
|
};
|
|
wps_red { /* red */
|
|
label = "wps_red";
|
|
gpios = <&stp 3 1>;
|
|
};
|
|
wps_yellow { /* yellow */
|
|
label = "wps_yellow";
|
|
gpios = <&stp 4 1>;
|
|
};
|
|
upgrade { /* blue */
|
|
label = "upgrade";
|
|
gpios = <&stp 5 1>;
|
|
};
|
|
tv { /* yellow */
|
|
label = "tv";
|
|
gpios = <&stp 6 1>;
|
|
};
|
|
internet_yellow: internet_yellow { /* yellow */
|
|
label = "internet_yellow";
|
|
gpios = <&stp 7 1>;
|
|
};
|
|
internet_red { /* red */
|
|
label = "internet_red";
|
|
gpios = <&stp 8 1>;
|
|
};
|
|
broadband_red { /* red */
|
|
label = "broadband_red";
|
|
gpios = <&stp 9 1>;
|
|
};
|
|
broadband_yellow: broadband_yellow { /* yellow */
|
|
label = "broadband_yellow";
|
|
gpios = <&stp 10 1>;
|
|
};
|
|
voice { /* yellow */
|
|
label = "voice";
|
|
gpios = <&stp 11 1>;
|
|
};
|
|
wireless_red { /* red */
|
|
label = "wireless_red";
|
|
gpios = <&stp 12 1>;
|
|
};
|
|
wireless_yellow: wireless_yellow { /* yellow */
|
|
label = "wireless_yellow";
|
|
gpios = <&stp 13 1>;
|
|
};
|
|
power2: power2 { /* yellow */
|
|
label = "power2";
|
|
gpios = <&stp 14 1>;
|
|
default-state = "keep";
|
|
};
|
|
power: power { /* red */
|
|
label = "power";
|
|
gpios = <&stp 15 1>;
|
|
};
|
|
};
|
|
};
|