mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
4e0c54bc5b
The following patches were removed because they are integrated in the upstream kernel 5.4: * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch * pending-5.4/220-optimize_inlining.patch * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch Some bigger changes were done to this feature and we did not port this patch yet: * hack-5.4/207-disable-modorder.patch This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes: * hack-5.4/930-crashlog.patch A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations. * pending-5.4/304-mips_disable_fpu.patch - no crashlog support yet as a required file got deleted upstream - Removed patch below, which is now seen as a recursive dependency [1] - Removed patch below due to build error [2] - fix still required to avoid identical function def [3] - Fixes included from Blocktrron - Fixes included from Chunkeey - Fix included from nbd regarding "dst leak in Flow Offload" [1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch [2] target/linux/generic/hack-5.4/207-disable-modorder.patch [3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
199 lines
5.1 KiB
Diff
199 lines
5.1 KiB
Diff
From 559391fc20fae506adcb311b904cc544c76436c0 Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Thu, 7 Nov 2019 18:52:07 +0000
|
|
Subject: [PATCH 634/660] net: sfp: allow modules with slow diagnostics to
|
|
probe
|
|
|
|
When a module is inserted, we attempt to read read the ID from address
|
|
0x50. Once we are able to read the ID, we immediately attempt to
|
|
initialise the hwmon support by reading from address 0x51. If this
|
|
fails, then we fall into error state, and assume that the module is
|
|
not usable.
|
|
|
|
Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for
|
|
I2C address 0x50, which responds immediately. However, address 0x51
|
|
is an emulated, which only becomes available once the on-board firmware
|
|
has booted. This prompts us to fall into the error state.
|
|
|
|
Since the module may be usable without diagnostics, arrange for the
|
|
hwmon probe independent of the rest of the SFP itself, retrying every
|
|
5s for up to about 60s for the monitoring to become available, and
|
|
print an error message if it doesn't become available.
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/phy/sfp.c | 96 +++++++++++++++++++++++++++++++++----------
|
|
1 file changed, 74 insertions(+), 22 deletions(-)
|
|
|
|
--- a/drivers/net/phy/sfp.c
|
|
+++ b/drivers/net/phy/sfp.c
|
|
@@ -218,6 +218,8 @@ struct sfp {
|
|
|
|
#if IS_ENABLED(CONFIG_HWMON)
|
|
struct sfp_diag diag;
|
|
+ struct delayed_work hwmon_probe;
|
|
+ unsigned int hwmon_tries;
|
|
struct device *hwmon_dev;
|
|
char *hwmon_name;
|
|
#endif
|
|
@@ -1159,29 +1161,27 @@ static const struct hwmon_chip_info sfp_
|
|
.info = sfp_hwmon_info,
|
|
};
|
|
|
|
-static int sfp_hwmon_insert(struct sfp *sfp)
|
|
+static void sfp_hwmon_probe(struct work_struct *work)
|
|
{
|
|
+ struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
|
|
int err, i;
|
|
|
|
- if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
|
|
- return 0;
|
|
-
|
|
- if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
|
|
- return 0;
|
|
-
|
|
- if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
|
|
- /* This driver in general does not support address
|
|
- * change.
|
|
- */
|
|
- return 0;
|
|
-
|
|
err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
|
|
- if (err < 0)
|
|
- return err;
|
|
+ if (err < 0) {
|
|
+ if (sfp->hwmon_tries--) {
|
|
+ mod_delayed_work(system_wq, &sfp->hwmon_probe,
|
|
+ T_PROBE_RETRY_SLOW);
|
|
+ } else {
|
|
+ dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
|
|
+ }
|
|
+ return;
|
|
+ }
|
|
|
|
sfp->hwmon_name = kstrdup(dev_name(sfp->dev), GFP_KERNEL);
|
|
- if (!sfp->hwmon_name)
|
|
- return -ENODEV;
|
|
+ if (!sfp->hwmon_name) {
|
|
+ dev_err(sfp->dev, "out of memory for hwmon name\n");
|
|
+ return;
|
|
+ }
|
|
|
|
for (i = 0; sfp->hwmon_name[i]; i++)
|
|
if (hwmon_is_bad_char(sfp->hwmon_name[i]))
|
|
@@ -1191,18 +1191,52 @@ static int sfp_hwmon_insert(struct sfp *
|
|
sfp->hwmon_name, sfp,
|
|
&sfp_hwmon_chip_info,
|
|
NULL);
|
|
+ if (IS_ERR(sfp->hwmon_dev))
|
|
+ dev_err(sfp->dev, "failed to register hwmon device: %ld\n",
|
|
+ PTR_ERR(sfp->hwmon_dev));
|
|
+}
|
|
+
|
|
+static int sfp_hwmon_insert(struct sfp *sfp)
|
|
+{
|
|
+ if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
|
|
+ return 0;
|
|
+
|
|
+ if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
|
|
+ return 0;
|
|
+
|
|
+ if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
|
|
+ /* This driver in general does not support address
|
|
+ * change.
|
|
+ */
|
|
+ return 0;
|
|
+
|
|
+ mod_delayed_work(system_wq, &sfp->hwmon_probe, 1);
|
|
+ sfp->hwmon_tries = R_PROBE_RETRY_SLOW;
|
|
|
|
- return PTR_ERR_OR_ZERO(sfp->hwmon_dev);
|
|
+ return 0;
|
|
}
|
|
|
|
static void sfp_hwmon_remove(struct sfp *sfp)
|
|
{
|
|
+ cancel_delayed_work_sync(&sfp->hwmon_probe);
|
|
if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) {
|
|
hwmon_device_unregister(sfp->hwmon_dev);
|
|
sfp->hwmon_dev = NULL;
|
|
kfree(sfp->hwmon_name);
|
|
}
|
|
}
|
|
+
|
|
+static int sfp_hwmon_init(struct sfp *sfp)
|
|
+{
|
|
+ INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void sfp_hwmon_exit(struct sfp *sfp)
|
|
+{
|
|
+ cancel_delayed_work_sync(&sfp->hwmon_probe);
|
|
+}
|
|
#else
|
|
static int sfp_hwmon_insert(struct sfp *sfp)
|
|
{
|
|
@@ -1212,6 +1246,15 @@ static int sfp_hwmon_insert(struct sfp *
|
|
static void sfp_hwmon_remove(struct sfp *sfp)
|
|
{
|
|
}
|
|
+
|
|
+static int sfp_hwmon_init(struct sfp *sfp)
|
|
+{
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void sfp_hwmon_exit(struct sfp *sfp)
|
|
+{
|
|
+}
|
|
#endif
|
|
|
|
/* Helpers */
|
|
@@ -1548,10 +1591,6 @@ static int sfp_sm_mod_probe(struct sfp *
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
- ret = sfp_hwmon_insert(sfp);
|
|
- if (ret < 0)
|
|
- return ret;
|
|
-
|
|
return 0;
|
|
}
|
|
|
|
@@ -1700,6 +1739,15 @@ static void sfp_sm_module(struct sfp *sf
|
|
case SFP_MOD_ERROR:
|
|
break;
|
|
}
|
|
+
|
|
+#if IS_ENABLED(CONFIG_HWMON)
|
|
+ if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
|
|
+ IS_ERR_OR_NULL(sfp->hwmon_dev)) {
|
|
+ err = sfp_hwmon_insert(sfp);
|
|
+ if (err)
|
|
+ dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
|
|
+ }
|
|
+#endif
|
|
}
|
|
|
|
static void sfp_sm_main(struct sfp *sfp, unsigned int event)
|
|
@@ -2001,6 +2049,8 @@ static struct sfp *sfp_alloc(struct devi
|
|
INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
|
|
INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
|
|
|
|
+ sfp_hwmon_init(sfp);
|
|
+
|
|
return sfp;
|
|
}
|
|
|
|
@@ -2008,6 +2058,8 @@ static void sfp_cleanup(void *data)
|
|
{
|
|
struct sfp *sfp = data;
|
|
|
|
+ sfp_hwmon_exit(sfp);
|
|
+
|
|
cancel_delayed_work_sync(&sfp->poll);
|
|
cancel_delayed_work_sync(&sfp->timeout);
|
|
if (sfp->i2c_mii) {
|