openwrt/target/linux/ath79/dts/qca9563_tplink_eap245-v3.dts
Sander Vanheule 8fa4361f55 ath79: add support for TP-Link EAP265 HD
The EAP265 HD is a rebadged EAP245v3, so images are compatible with both
devices.

Link: https://fccid.io/TE7EAP265HD/Letter/6-Request-for-FCC-Change-ID-4823578.pdf
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-04-27 20:29:37 +02:00

170 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,eap245-v3", "qca,qca9563";
model = "TP-Link EAP245 v3 / EAP265 HD v1";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_amber;
led-running = &led_status_green;
led-upgrade = &led_status_amber;
label-mac-device = &eth0;
};
leds {
compatible = "gpio-leds";
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
label = "amber:status";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&pcie {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "factory-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot";
reg = <0x040000 0x040000>;
read-only;
};
partition@80000 {
label = "partition-table";
reg = <0x080000 0x010000>;
read-only;
};
info: partition@90000 {
label = "info";
reg = <0x090000 0x010000>;
read-only;
};
art: partition@a0000 {
label = "art";
reg = <0x0a0000 0x010000>;
read-only;
};
partition@b0000 {
label = "extra-para";
reg = <0x0b0000 0x010000>;
read-only;
};
partition@c0000 {
compatible = "openwrt,elf";
label = "firmware";
reg = <0x0c0000 0xe40000>;
};
partition@f00000 {
label = "config";
reg = <0xf00000 0x030000>;
read-only;
};
partition@f30000 {
label = "mutil-log";
reg = <0xf30000 0x080000>;
read-only;
};
partition@fb0000 {
label = "oops";
reg = <0xfb0000 0x040000>;
read-only;
};
};
};
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,ar8327-initvals = <
0x04 0x00080080 /* PAD0 */
0x7c 0x0000007e /* PORT0_STATUS */
0xe0 0xc74164de /* SGMII_CTRL */
>;
};
};
&eth0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "sgmii";
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_info_8>;
nvmem-cell-names = "mac-address";
};
&info {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_info_8: macaddr@8 {
reg = <0x8 0x6>;
};
};