mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
85 lines
3.0 KiB
Diff
85 lines
3.0 KiB
Diff
From f11a04464ae57e8db1bb7634547842b43e36a898 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
|
|
Date: Fri, 22 Dec 2017 22:47:16 +0100
|
|
Subject: i2c: gpio: Enable working over slow can_sleep GPIOs
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
"Slow" GPIOs (usually those connected over an SPI or an I2C bus) are,
|
|
well, slow in their operation. It is generally a good idea to avoid
|
|
using them for time-critical operation, but sometimes the hardware just
|
|
sucks, and the software has to cope. In addition to that, the I2C bus
|
|
itself does not actually define any strict timing limits; the bus is
|
|
free to go all the way down to DC. The timeouts (and therefore the
|
|
slowest acceptable frequency) are present only in SMBus.
|
|
|
|
The `can_sleep` is IMHO a wrong concept to use here. My SPI-to-quad-UART
|
|
chip (MAX14830) is connected via a 26MHz SPI bus, and it happily drives
|
|
SCL at 200kHz (5µs pulses) during my benchmarks. That's faster than the
|
|
maximal allowed speed of the traditional I2C.
|
|
|
|
The previous version of this code did not really block operation over
|
|
slow GPIO pins, anyway. Instead, it just resorted to printing a warning
|
|
with a backtrace each time a GPIO pin was accessed, thereby slowing
|
|
things down even more.
|
|
|
|
Finally, it's not just me. A similar patch was originally submitted in
|
|
2015 [1].
|
|
|
|
[1] https://patchwork.ozlabs.org/patch/450956/
|
|
|
|
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
|
|
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
|
|
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
---
|
|
drivers/i2c/busses/i2c-gpio.c | 11 +++++++----
|
|
1 file changed, 7 insertions(+), 4 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-gpio.c
|
|
+++ b/drivers/i2c/busses/i2c-gpio.c
|
|
@@ -44,7 +44,7 @@ static void i2c_gpio_setsda_val(void *da
|
|
{
|
|
struct i2c_gpio_platform_data *pdata = data;
|
|
|
|
- gpio_set_value(pdata->sda_pin, state);
|
|
+ gpio_set_value_cansleep(pdata->sda_pin, state);
|
|
}
|
|
|
|
/* Toggle SCL by changing the direction of the pin. */
|
|
@@ -68,21 +68,21 @@ static void i2c_gpio_setscl_val(void *da
|
|
{
|
|
struct i2c_gpio_platform_data *pdata = data;
|
|
|
|
- gpio_set_value(pdata->scl_pin, state);
|
|
+ gpio_set_value_cansleep(pdata->scl_pin, state);
|
|
}
|
|
|
|
static int i2c_gpio_getsda(void *data)
|
|
{
|
|
struct i2c_gpio_platform_data *pdata = data;
|
|
|
|
- return gpio_get_value(pdata->sda_pin);
|
|
+ return gpio_get_value_cansleep(pdata->sda_pin);
|
|
}
|
|
|
|
static int i2c_gpio_getscl(void *data)
|
|
{
|
|
struct i2c_gpio_platform_data *pdata = data;
|
|
|
|
- return gpio_get_value(pdata->scl_pin);
|
|
+ return gpio_get_value_cansleep(pdata->scl_pin);
|
|
}
|
|
|
|
static int of_i2c_gpio_get_pins(struct device_node *np,
|
|
@@ -175,6 +175,9 @@ static int i2c_gpio_probe(struct platfor
|
|
memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
|
|
}
|
|
|
|
+ if (gpiod_cansleep(gpio_to_desc(pdata->sda_pin)) || gpiod_cansleep(gpio_to_desc(pdata->scl_pin)))
|
|
+ dev_warn(&pdev->dev, "Slow GPIO pins might wreak havoc into I2C/SMBus bus timing");
|
|
+
|
|
if (pdata->sda_is_open_drain) {
|
|
gpio_direction_output(pdata->sda_pin, 1);
|
|
bit_data->setsda = i2c_gpio_setsda_val;
|