mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 22:47:56 +00:00
f032601ed7
Adds support for GPON SFP modules based on the Realtek RTL8672 and RTL9601C chips, including but not limited to: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 Signed-off-by: Vladimir Markovets <abam_a@yahoo.com>
56 lines
2.0 KiB
Diff
56 lines
2.0 KiB
Diff
From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Thu, 28 Nov 2019 14:24:40 +0000
|
|
Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
|
|
attempts
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/phy/sfp.c | 14 +++++++++++---
|
|
1 file changed, 11 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/net/phy/sfp.c
|
|
+++ b/drivers/net/phy/sfp.c
|
|
@@ -172,6 +172,14 @@ static const enum gpiod_flags gpio_flags
|
|
#define T_RESET_US 10
|
|
#define T_FAULT_RECOVER msecs_to_jiffies(1000)
|
|
|
|
+/* N_FAULT_INIT is the number of recovery attempts at module initialisation
|
|
+ * time. If the TX_FAULT signal is not deasserted after this number of
|
|
+ * attempts at clearing it, we decide that the module is faulty.
|
|
+ * N_FAULT is the same but after the module has initialised.
|
|
+ */
|
|
+#define N_FAULT_INIT 5
|
|
+#define N_FAULT 5
|
|
+
|
|
/* SFP module presence detection is poor: the three MOD DEF signals are
|
|
* the same length on the PCB, which means it's possible for MOD DEF 0 to
|
|
* connect before the I2C bus on MOD DEF 1/2.
|
|
@@ -1972,7 +1980,7 @@ static void sfp_sm_main(struct sfp *sfp,
|
|
sfp_module_tx_enable(sfp);
|
|
|
|
/* Initialise the fault clearance retries */
|
|
- sfp->sm_retries = 5;
|
|
+ sfp->sm_retries = N_FAULT_INIT;
|
|
|
|
/* We need to check the TX_FAULT state, which is not defined
|
|
* while TX_DISABLE is asserted. The earliest we want to do
|
|
@@ -2012,7 +2020,7 @@ static void sfp_sm_main(struct sfp *sfp,
|
|
* or t_start_up, so assume there is a fault.
|
|
*/
|
|
sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
|
|
- sfp->sm_retries == 5);
|
|
+ sfp->sm_retries == N_FAULT_INIT);
|
|
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
|
|
init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
|
|
* clear. Probe for the PHY and check the LOS state.
|
|
@@ -2025,7 +2033,7 @@ static void sfp_sm_main(struct sfp *sfp,
|
|
sfp_sm_link_check_los(sfp);
|
|
|
|
/* Reset the fault retry count */
|
|
- sfp->sm_retries = 5;
|
|
+ sfp->sm_retries = N_FAULT;
|
|
}
|
|
break;
|
|
|