WonJung Kim 2dde2416e1 ramips: add support for ipTIME A3004T ... ipTIME A3004T is a 2.4/5GHz band router, based on Mediatek MT7621. Specifications: - SoC: MT7621 (880MHz) - RAM: DDR3 256M - Flash: NAND 128MB (Macronix NAND 128MiB 3,3V 8-bit) - WiFi: - 2.4GHz: MT7615E - 5GHz : MT7615E - Ethernet: - 4x LAN - 1x WAN - USB: 1 * USB3.0 port - UART: - 3.3V, TX, RX, GND / 57600 8N1 Installation via web interface: 1. Flash initramfs image using OEM's Recovery mode 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: - Flash stock firmware via OEM's Recovery mode How to use OEM's Recovery mode: 1. Power up with holding down the reset key until CPU LED stop blinking. 2. Set fixed ip with `192.168.0.2` with subnet mask `255.255.255.0` 3. Flash image via tftp to `192.168.0.1` Additional Notes: This router shares one MT7915E chip for both 2.4Ghz/5Ghz. radio0 will not working on 5Ghz as it's not connected to the antenna. Signed-off-by: WonJung Kim <git@won-jung.kim> (added led dt-bindings) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>		2021-12-29 20:35:57 +01:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-tp-link.mk	treewide: call check-size before append-metadata	2021-07-10 19:40:10 +02:00
Makefile	ramips: mt7620: use OKLI loader with Jboot devices	2021-12-13 19:36:10 +01:00
mt76x8.mk	ramips: add support for Wavlink WL-WN576A2	2021-11-20 21:08:25 +01:00
mt7620.mk	ramips: add support for WeVO AIR DUO	2021-12-29 20:35:57 +01:00
mt7621.mk	ramips: add support for ipTIME A3004T	2021-12-29 20:35:57 +01:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	ramips: use lzma-loader on D-Link DIR-615 H1	2021-11-20 21:08:25 +01:00
rt3883.mk	ramips: provide default BLOCKSIZE for Device/seama	2021-08-30 00:37:47 +02:00