openwrt/target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts
Álvaro Fernández Rojas 6f328dfe19 bmips: dts: remove unneeded cfe alias
This is no longer needed after nvmem-layout changes.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-16 10:59:47 +01:00

235 lines
3.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6358.dtsi"
/ {
model = "Huawei EchoLife HG556a (version B)";
compatible = "huawei,hg556a-b", "brcm,bcm6358";
aliases {
led-boot = &led_power_red;
led-failsafe = &led_power_red;
led-running = &led_power_red;
led-upgrade = &led_power_red;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
help {
label = "help";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HELP>;
debounce-interval = <60>;
};
wlan {
label = "wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
restart {
label = "restart";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CONFIG>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led@0 {
label = "red:message";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
led@1 {
label = "red:hspa";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
led@2 {
label = "red:dsl";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led_power_red: led@3 {
label = "red:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
led@6 {
label = "all";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led@12 {
label = "green:lan1";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
led@13 {
label = "red:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led@15 {
label = "green:lan2";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led@22 {
label = "red:lan2";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
led@23 {
label = "green:lan3";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
led@26 {
label = "red:lan3";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
led@27 {
label = "green:lan4";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
led@28 {
label = "red:lan4";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan {
label = "red:wlan";
gpios = <&ath9k 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
};
};
&ehci {
status = "okay";
};
&ethernet1 {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0 0>;
nvmem-cell-names = "mac-address";
phy-mode = "mii";
fixed-link {
speed = <100>;
full-duplex;
};
};
&iudma {
status = "okay";
};
&ohci {
status = "okay";
};
&pci {
status = "okay";
ath9k: wifi@1,0 {
compatible = "pci168c,0029";
reg = <0x0800 0 0 0 0>;
qca,no-eeprom;
nvmem-cells = <&macaddr_cfe_6a0 1>;
nvmem-cell-names = "mac-address";
#gpio-cells = <2>;
gpio-controller;
};
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "cfe";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
compatible = "mac-base";
reg = <0x6a0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xec0000>;
compatible = "brcm,bcm963xx-imagetag";
};
cal_data: partition@ee0000 {
label = "cal_data";
reg = <0xee0000 0x100000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_data_1e000: cal@1e000 {
reg = <0x1e000 0xeb8>;
};
};
};
partition@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};