mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
87 lines
3.2 KiB
Diff
87 lines
3.2 KiB
Diff
This fixes a boot hang observed when the bootloader
|
|
already enabled the PCIe link for it's own use. The
|
|
fundamental problem is that Freescale forgot to wire
|
|
up the core reset, so software doesn't have a sane way
|
|
to get the core into a defined state.
|
|
|
|
According to the DW PCIe core reference manual configuration
|
|
of the core may only happen when the LTSSM is disabled, so
|
|
this is one of the first things we need to do. Apparently
|
|
this isn't safe to do when the LTSSM is in any other state
|
|
than "detect" as we observe an instant machine hang when
|
|
trying to do so while the link is already up.
|
|
|
|
As a workaround force LTSSM into detect state right before
|
|
hitting the disable switch.
|
|
|
|
Reported-by: Fabio Estevam <fabio.estevam <at> freescale.com>
|
|
Signed-off-by: Lucas Stach <l.stach <at> pengutronix.de>
|
|
Acked-by: Tim Harvey <tharvey <at> gateworks.com>
|
|
--- a/drivers/pci/host/pci-imx6.c
|
|
+++ b/drivers/pci/host/pci-imx6.c
|
|
@@ -52,6 +52,9 @@ struct imx6_pcie {
|
|
|
|
/* PCIe Port Logic registers (memory-mapped) */
|
|
#define PL_OFFSET 0x700
|
|
+#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
|
|
+#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16)
|
|
+#define PCIE_PL_PFLR_FORCE_LINK (1 << 15)
|
|
#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
|
|
#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
|
|
#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29)
|
|
@@ -217,6 +220,31 @@ static int imx6q_pcie_abort_handler(unsi
|
|
static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
|
|
{
|
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
|
|
+ u32 val, gpr1, gpr12;
|
|
+
|
|
+ /*
|
|
+ * If the bootloader already enabled the link we need some special
|
|
+ * handling to get the core back into a state where it is safe to
|
|
+ * touch it for configuration. As there is no dedicated reset signal
|
|
+ * wired up for MX6QDL, we need to manually force LTSSM into "detect"
|
|
+ * state before completely disabling LTSSM, which is a prerequisite
|
|
+ * for core configuration.
|
|
+ * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
|
|
+ * indication that the bootloader activated the link.
|
|
+ */
|
|
+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
|
|
+ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
|
|
+
|
|
+ if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
|
|
+ (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
|
|
+ val = readl(pp->dbi_base + PCIE_PL_PFLR);
|
|
+ val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
|
|
+ val |= PCIE_PL_PFLR_FORCE_LINK;
|
|
+ writel(val, pp->dbi_base + PCIE_PL_PFLR);
|
|
+
|
|
+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
+ }
|
|
|
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
@@ -627,6 +655,14 @@ static int __init imx6_pcie_probe(struct
|
|
return 0;
|
|
}
|
|
|
|
+static void imx6_pcie_shutdown(struct platform_device *pdev)
|
|
+{
|
|
+ struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
|
|
+
|
|
+ /* bring down link, so bootloader gets clean state in case of reboot */
|
|
+ imx6_pcie_assert_core_reset(&imx6_pcie->pp);
|
|
+}
|
|
+
|
|
static const struct of_device_id imx6_pcie_of_match[] = {
|
|
{ .compatible = "fsl,imx6q-pcie", },
|
|
{},
|
|
@@ -639,6 +675,7 @@ static struct platform_driver imx6_pcie_
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = imx6_pcie_of_match,
|
|
},
|
|
+ .shutdown = imx6_pcie_shutdown,
|
|
};
|
|
|
|
/* Freescale PCIe driver does not allow module unload */
|