mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
3a4b751110
The uart node is enabled on all devices except one (GL-USB150 *). Thus, let's not have a few hundred nodes to enable it, but do not disable it in the first place. Where the majority of devices is using it, also move the serial0 alias to the DTSI. *) Since GL-USB150 even defines serial0 alias, the missing uart is probably just a mistake. Anyway, disable it for now so this patch stays cosmetic. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
216 lines
3.6 KiB
Plaintext
216 lines
3.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ath79.dtsi"
|
|
|
|
/ {
|
|
compatible = "qca,ar9330";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
serial0 = &uart;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "mips,mips24Kc";
|
|
clocks = <&pll ATH79_CLK_CPU>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyATH0,115200";
|
|
};
|
|
|
|
ahb {
|
|
apb {
|
|
ddr_ctrl: memory-controller@18000000 {
|
|
compatible = "qca,ar7240-ddr-controller";
|
|
reg = <0x18000000 0x100>;
|
|
|
|
#qca,ddr-wb-channel-cells = <1>;
|
|
};
|
|
|
|
uart: uart@18020000 {
|
|
compatible = "qca,ar9330-uart";
|
|
reg = <0x18020000 0x14>;
|
|
|
|
interrupts = <3>;
|
|
|
|
clocks = <&pll ATH79_CLK_REF>;
|
|
clock-names = "uart";
|
|
};
|
|
|
|
gpio: gpio@18040000 {
|
|
compatible = "qca,ar7100-gpio";
|
|
reg = <0x18040000 0x34>;
|
|
interrupts = <2>;
|
|
|
|
ngpios = <30>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pinmux: pinmux@18040028 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x18040028 0x8>;
|
|
|
|
pinctrl-single,bit-per-mux;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x1>;
|
|
#pinctrl-cells = <2>;
|
|
|
|
jtag_disable_pins: pinmux_jtag_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x1 0x1>;
|
|
};
|
|
|
|
switch_led_disable_pins: pinmux_switch_led_disable_pins {
|
|
pinctrl-single,bits = <0x0 0x0 0xf8>;
|
|
};
|
|
};
|
|
|
|
pll: pll-controller@18050000 {
|
|
compatible = "qca,ar9330-pll";
|
|
reg = <0x18050000 0x100>;
|
|
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
wdt: wdt@18060008 {
|
|
compatible = "qca,ar7130-wdt";
|
|
reg = <0x18060008 0x8>;
|
|
|
|
interrupts = <4>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
clock-names = "wdt";
|
|
};
|
|
|
|
rst: reset-controller@1806001c {
|
|
compatible = "qca,ar7100-reset";
|
|
reg = <0x1806001c 0x4>;
|
|
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
usb: usb@1b000000 {
|
|
compatible = "chipidea,usb2";
|
|
reg = <0x1b000000 0x200>;
|
|
|
|
interrupts = <3>;
|
|
resets = <&rst 5>;
|
|
reset-names = "usb-host";
|
|
|
|
phy-names = "usb-phy";
|
|
phys = <&usb_phy>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@1f000000 {
|
|
compatible = "qca,ar934x-spi";
|
|
reg = <0x1f000000 0x1c>;
|
|
|
|
clocks = <&pll ATH79_CLK_AHB>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gmac: gmac@18070000 {
|
|
compatible = "qca,ar9330-gmac";
|
|
reg = <0x18070000 0x4>;
|
|
};
|
|
|
|
wmac: wmac@18100000 {
|
|
compatible = "qca,ar9330-wmac";
|
|
reg = <0x18100000 0x20000>;
|
|
|
|
interrupts = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usb_phy: usb-phy {
|
|
compatible = "qca,ar7200-usb-phy";
|
|
|
|
reset-names = "usb-phy", "usb-suspend-override";
|
|
resets = <&rst 4>, <&rst 3>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&cpuintc {
|
|
qca,ddr-wb-channel-interrupts = <2>, <3>;
|
|
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
|
|
};
|
|
|
|
ð0 {
|
|
compatible = "qca,ar9330-eth", "syscon";
|
|
|
|
pll-data = <0x00110000 0x00001099 0x00991099>;
|
|
|
|
resets = <&rst 9>;
|
|
reset-names = "mac";
|
|
phy-handle = <&swphy4>;
|
|
};
|
|
|
|
&mdio1 {
|
|
status = "okay";
|
|
compatible = "qca,ar9330-mdio";
|
|
|
|
resets = <&rst 23>;
|
|
reset-names = "mdio";
|
|
builtin-switch;
|
|
|
|
builtin_switch: switch0@1f {
|
|
compatible = "qca,ar7240sw";
|
|
reg = <0x1f>;
|
|
resets = <&rst 8>;
|
|
reset-names = "switch";
|
|
qca,mib-poll-interval = <500>;
|
|
|
|
mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
swphy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
phy-mode = "mii";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
compatible = "qca,ar9330-eth", "syscon";
|
|
|
|
pll-data = <0x00110000 0x00001099 0x00991099>;
|
|
phy-mode = "gmii";
|
|
|
|
resets = <&rst 13>;
|
|
reset-names = "mac";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|