mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
fc33c41c21
The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has got a function, by default, which does the same thing as the netdev trigger. Because of bridge offloading on DSA, the netdev trigger won't see the frames between the switch ports whilst the default function will. Do not use the GPIO function on switch pins on devices that fall under this category. Keep it for: mt7621_belkin_rt1800.dts: There's only one LED which is for the wan interface and there's no bridge offloading between the "wan" interface and other interfaces. mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan" and "lan" interfaces. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
176 lines
2.6 KiB
Plaintext
176 lines
2.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "linksys,e7350", "mediatek,mt7621-soc";
|
|
model = "Linksys E7350";
|
|
|
|
aliases {
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-wps {
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_WPS;
|
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_power: led-power {
|
|
label = "blue:power";
|
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
|
|
led-wan {
|
|
color = <LED_COLOR_ID_AMBER>;
|
|
function = LED_FUNCTION_WAN;
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "Boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "Config";
|
|
reg = <0x80000 0x80000>;
|
|
};
|
|
|
|
factory: partition@100000 {
|
|
label = "Factory";
|
|
reg = <0x100000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "firmware";
|
|
reg = <0x180000 0x3000000>;
|
|
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x0 0x400000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "ubi";
|
|
reg = <0x400000 0x2c00000>;
|
|
};
|
|
};
|
|
|
|
partition@3180000 {
|
|
label = "alt_firmware";
|
|
reg = <0x3180000 0x3000000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6180000 {
|
|
label = "cbtinfo";
|
|
reg = <0x6180000 0x80000>;
|
|
read-only;
|
|
};
|
|
/* seems to be the end here. Can't read past 0x6200000 */
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
mediatek,mtd-eeprom = <&factory 0x0000>;
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "i2c", "uart3", "jtag", "wdt";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
label = "wan";
|
|
phy-handle = <ðphy0>;
|
|
};
|
|
|
|
&mdio {
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@1 {
|
|
status = "okay";
|
|
label = "lan4";
|
|
};
|
|
|
|
port@2 {
|
|
status = "okay";
|
|
label = "lan3";
|
|
};
|
|
|
|
port@3 {
|
|
status = "okay";
|
|
label = "lan2";
|
|
};
|
|
|
|
port@4 {
|
|
status = "okay";
|
|
label = "lan1";
|
|
};
|
|
};
|
|
};
|