mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
0a4b309f41
Backport initial LEDs hw control support. Currently this is limited to only rx/tx and link events for the netdev trigger but the API got accepted and the additional modes are working on and will be backported later. Refresh every patch and add the additional config flag for QCA8K new LEDs support. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
58 lines
2.2 KiB
Diff
58 lines
2.2 KiB
Diff
From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001
|
|
From: Robert Marko <robert.marko@sartura.hr>
|
|
Date: Mon, 1 Nov 2021 18:10:28 +0100
|
|
Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support
|
|
|
|
Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in.
|
|
|
|
It shares most of the stuff with its external counterpart, however it is
|
|
modified for the SoC.
|
|
Namely, it doesn't have second CPU port (Port 6), so it has 6 ports
|
|
instead of 7.
|
|
It also has no built-in PHY-s but rather requires external PSGMII based
|
|
companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry
|
|
out calibration before using them.
|
|
PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which
|
|
unfortunately requires some magic values as the datasheet doesnt document
|
|
the bits that are being set or the register at all.
|
|
|
|
Since its built-in it is MMIO like other peripherals and doesn't have its
|
|
own MDIO bus but depends on the SoC provided one.
|
|
|
|
CPU connection is at Port 0 and it uses some kind of a internal connection
|
|
and no traditional RGMII/SGMII.
|
|
It also doesn't use in-band tagging like other qca8k switches so a shinfo
|
|
based tagger is used.
|
|
|
|
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
|
|
---
|
|
drivers/net/dsa/qca/Kconfig | 9 +++++++++
|
|
drivers/net/dsa/qca/Makefile | 1 +
|
|
2 files changed, 10 insertions(+)
|
|
|
|
--- a/drivers/net/dsa/qca/Kconfig
|
|
+++ b/drivers/net/dsa/qca/Kconfig
|
|
@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT
|
|
help
|
|
This enabled support for LEDs present on the Qualcomm Atheros
|
|
QCA8K Ethernet switch chips.
|
|
+
|
|
+config NET_DSA_QCA8K_IPQ4019
|
|
+ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support"
|
|
+ depends on HAS_IOMEM && NET_DSA
|
|
+ select NET_DSA_TAG_IPQ4019
|
|
+ select REGMAP
|
|
+ help
|
|
+ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in
|
|
+ Ethernet switch.
|
|
+
|
|
--- a/drivers/net/dsa/qca/Makefile
|
|
+++ b/drivers/net/dsa/qca/Makefile
|
|
@@ -1,5 +1,6 @@
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
|
obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
|
|
+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o
|
|
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
|
|
qca8k-y += qca8k-common.o qca8k-8xxx.o
|
|
ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
|