mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
b0c5e8b927
Add support for kernel 4.9 based on the more upstream comformant partition defintions. Increases compressed kernel size by ~95k compared to 4.4. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
193 lines
5.6 KiB
Diff
193 lines
5.6 KiB
Diff
From 69226896ad636b94f6d2e55d75ff21a29c4de83b Mon Sep 17 00:00:00 2001
|
|
From: Roger Quadros <rogerq@ti.com>
|
|
Date: Fri, 21 Apr 2017 16:15:38 +0300
|
|
Subject: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
|
|
|
|
Some boards [1] leave the PHYs at an invalid state
|
|
during system power-up or reset thus causing unreliability
|
|
issues with the PHY which manifests as PHY not being detected
|
|
or link not functional. To fix this, these PHYs need to be RESET
|
|
via a GPIO connected to the PHY's RESET pin.
|
|
|
|
Some boards have a single GPIO controlling the PHY RESET pin of all
|
|
PHYs on the bus whereas some others have separate GPIOs controlling
|
|
individual PHY RESETs.
|
|
|
|
In both cases, the RESET de-assertion cannot be done in the PHY driver
|
|
as the PHY will not probe till its reset is de-asserted.
|
|
So do the RESET de-assertion in the MDIO bus driver.
|
|
|
|
[1] - am572x-idk, am571x-idk, a437x-idk
|
|
|
|
Signed-off-by: Roger Quadros <rogerq@ti.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
Documentation/devicetree/bindings/net/mdio.txt | 33 ++++++++++++++++++
|
|
drivers/net/phy/mdio_bus.c | 47 ++++++++++++++++++++++++++
|
|
drivers/of/of_mdio.c | 7 ++++
|
|
include/linux/phy.h | 7 ++++
|
|
4 files changed, 94 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/net/mdio.txt
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/net/mdio.txt
|
|
@@ -0,0 +1,33 @@
|
|
+Common MDIO bus properties.
|
|
+
|
|
+These are generic properties that can apply to any MDIO bus.
|
|
+
|
|
+Optional properties:
|
|
+- reset-gpios: List of one or more GPIOs that control the RESET lines
|
|
+ of the PHYs on that MDIO bus.
|
|
+- reset-delay-us: RESET pulse width in microseconds as per PHY datasheet.
|
|
+
|
|
+A list of child nodes, one per device on the bus is expected. These
|
|
+should follow the generic phy.txt, or a device specific binding document.
|
|
+
|
|
+Example :
|
|
+This example shows these optional properties, plus other properties
|
|
+required for the TI Davinci MDIO driver.
|
|
+
|
|
+ davinci_mdio: ethernet@0x5c030000 {
|
|
+ compatible = "ti,davinci_mdio";
|
|
+ reg = <0x5c030000 0x1000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
|
+ reset-delay-us = <2>; /* PHY datasheet states 1us min */
|
|
+
|
|
+ ethphy0: ethernet-phy@1 {
|
|
+ reg = <1>;
|
|
+ };
|
|
+
|
|
+ ethphy1: ethernet-phy@3 {
|
|
+ reg = <3>;
|
|
+ };
|
|
+ };
|
|
--- a/drivers/net/phy/mdio_bus.c
|
|
+++ b/drivers/net/phy/mdio_bus.c
|
|
@@ -22,8 +22,11 @@
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
+#include <linux/gpio.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_mdio.h>
|
|
+#include <linux/of_gpio.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
@@ -304,6 +307,7 @@ int __mdiobus_register(struct mii_bus *b
|
|
{
|
|
struct mdio_device *mdiodev;
|
|
int i, err;
|
|
+ struct gpio_desc *gpiod;
|
|
|
|
if (NULL == bus || NULL == bus->name ||
|
|
NULL == bus->read || NULL == bus->write)
|
|
@@ -330,6 +334,35 @@ int __mdiobus_register(struct mii_bus *b
|
|
if (bus->reset)
|
|
bus->reset(bus);
|
|
|
|
+ /* de-assert bus level PHY GPIO resets */
|
|
+ if (bus->num_reset_gpios > 0) {
|
|
+ bus->reset_gpiod = devm_kcalloc(&bus->dev,
|
|
+ bus->num_reset_gpios,
|
|
+ sizeof(struct gpio_desc *),
|
|
+ GFP_KERNEL);
|
|
+ if (!bus->reset_gpiod)
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < bus->num_reset_gpios; i++) {
|
|
+ gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
|
|
+ GPIOD_OUT_LOW);
|
|
+ if (IS_ERR(gpiod)) {
|
|
+ err = PTR_ERR(gpiod);
|
|
+ if (err != -ENOENT) {
|
|
+ dev_err(&bus->dev,
|
|
+ "mii_bus %s couldn't get reset GPIO\n",
|
|
+ bus->id);
|
|
+ return err;
|
|
+ }
|
|
+ } else {
|
|
+ bus->reset_gpiod[i] = gpiod;
|
|
+ gpiod_set_value_cansleep(gpiod, 1);
|
|
+ udelay(bus->reset_delay_us);
|
|
+ gpiod_set_value_cansleep(gpiod, 0);
|
|
+ }
|
|
+ }
|
|
+
|
|
for (i = 0; i < PHY_MAX_ADDR; i++) {
|
|
if ((bus->phy_mask & (1 << i)) == 0) {
|
|
struct phy_device *phydev;
|
|
@@ -355,6 +388,13 @@ error:
|
|
mdiodev->device_remove(mdiodev);
|
|
mdiodev->device_free(mdiodev);
|
|
}
|
|
+
|
|
+ /* Put PHYs in RESET to save power */
|
|
+ for (i = 0; i < bus->num_reset_gpios; i++) {
|
|
+ if (bus->reset_gpiod[i])
|
|
+ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
|
|
+ }
|
|
+
|
|
device_del(&bus->dev);
|
|
return err;
|
|
}
|
|
@@ -376,6 +416,13 @@ void mdiobus_unregister(struct mii_bus *
|
|
mdiodev->device_remove(mdiodev);
|
|
mdiodev->device_free(mdiodev);
|
|
}
|
|
+
|
|
+ /* Put PHYs in RESET to save power */
|
|
+ for (i = 0; i < bus->num_reset_gpios; i++) {
|
|
+ if (bus->reset_gpiod[i])
|
|
+ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
|
|
+ }
|
|
+
|
|
device_del(&bus->dev);
|
|
}
|
|
EXPORT_SYMBOL(mdiobus_unregister);
|
|
--- a/drivers/of/of_mdio.c
|
|
+++ b/drivers/of/of_mdio.c
|
|
@@ -22,6 +22,8 @@
|
|
#include <linux/of_net.h>
|
|
#include <linux/module.h>
|
|
|
|
+#define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
|
|
+
|
|
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
@@ -220,6 +222,11 @@ int of_mdiobus_register(struct mii_bus *
|
|
|
|
mdio->dev.of_node = np;
|
|
|
|
+ /* Get bus level PHY reset GPIO details */
|
|
+ mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
|
|
+ of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
|
|
+ mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
|
|
+
|
|
/* Register the MDIO bus */
|
|
rc = mdiobus_register(mdio);
|
|
if (rc)
|
|
--- a/include/linux/phy.h
|
|
+++ b/include/linux/phy.h
|
|
@@ -193,6 +193,13 @@ struct mii_bus {
|
|
* matching its address
|
|
*/
|
|
int irq[PHY_MAX_ADDR];
|
|
+
|
|
+ /* GPIO reset pulse width in microseconds */
|
|
+ int reset_delay_us;
|
|
+ /* Number of reset GPIOs */
|
|
+ int num_reset_gpios;
|
|
+ /* Array of RESET GPIO descriptors */
|
|
+ struct gpio_desc **reset_gpiod;
|
|
};
|
|
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
|
|
|