mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
48feea4861
Add Netgear WNCE2001. This is a small RT3052 device with 4MB spi flash and 32MB ram. 2 built-in antennas, 1x fastE, no USB, reset & wps switch. On my model the AP/RT switch is unpopulated, but I verified the gpio mapping for it. The stock firmware is running an unprotected tftpd which allows you to read any file from the filesystem. Serial port is present on testpads (See image on the wiki page). There are more testpads below the shield near the SoC, which may have JTAG. Slight annoyance: The bootloader is checksumming kernel&rootfs, but can be tricked by zeroing checksum and length fields in the checksum partition, see target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming The manufacturer image is very similar to the DAP one, so I slightly modified mkdapimg to support generating it. The resulting openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin can be used to flash from stock to OpenWRT using the stock firmware upgrade function, without using the serial port. http://www.netgear.com/landing/wnce2001.aspx http://wiki.openwrt.org/toh/netgear/wnce2001 Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 36289
124 lines
1.8 KiB
Bash
124 lines
1.8 KiB
Bash
#!/bin/sh
|
|
|
|
rt2x00_eeprom_die() {
|
|
echo "rt2x00 eeprom: " "$*"
|
|
exit 1
|
|
}
|
|
|
|
rt2x00_eeprom_extract() {
|
|
local part=$1
|
|
local offset=$2
|
|
local count=$3
|
|
local mtd
|
|
|
|
. /lib/functions.sh
|
|
|
|
mtd=$(find_mtd_part $part)
|
|
[ -n "$mtd" ] || \
|
|
rt2x00_eeprom_die "no mtd device found for partition $part"
|
|
|
|
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
|
|
rt2x00_eeprom_die "failed to extract from $mtd"
|
|
}
|
|
|
|
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
|
|
|
. /lib/ramips.sh
|
|
|
|
board=$(ramips_board_name)
|
|
|
|
case "$FIRMWARE" in
|
|
"soc_wmac.eeprom")
|
|
case $board in
|
|
dir-300-b1 | \
|
|
dir-600-b1 | \
|
|
dir-600-b2 | \
|
|
dir-615-d)
|
|
rt2x00_eeprom_extract "devdata" 16384 272
|
|
;;
|
|
|
|
dap-1350)
|
|
rt2x00_eeprom_extract "devdata" 0 272
|
|
;;
|
|
|
|
rt-n10-plus | \
|
|
rt-g32-b1)
|
|
rt2x00_eeprom_extract "devconf" 0 272
|
|
;;
|
|
|
|
f5d8235-v1 | \
|
|
f5d8235-v2)
|
|
rt2x00_eeprom_extract "u-boot" 262144 272
|
|
;;
|
|
|
|
3g-6200n | \
|
|
3g-6200nl | \
|
|
3g300m | \
|
|
air3gii | \
|
|
all0239-3g | \
|
|
all0256n | \
|
|
all5002 | \
|
|
argus-atp52b | \
|
|
bc2 | \
|
|
br6425 | \
|
|
broadway | \
|
|
br6524n | \
|
|
carambola | \
|
|
d105 | \
|
|
dir-615-h1 | \
|
|
dir-620-a1 | \
|
|
esr-9753 | \
|
|
fonera20n | \
|
|
rt-n13u | \
|
|
freestation5 | \
|
|
hw550-3g | \
|
|
mofi3500-3gn | \
|
|
pwh2004 | \
|
|
nbg-419n | \
|
|
nw718 | \
|
|
omni-emb | \
|
|
omni-emb-hpm | \
|
|
psr-680w | \
|
|
rt-n15 | \
|
|
rt-n56u | \
|
|
sl-r7205 | \
|
|
v11st-fe | \
|
|
v22rw-2x2 | \
|
|
w306r-v20 | \
|
|
w150m | \
|
|
w502u | \
|
|
wcr-150gn | \
|
|
whr-g300n | \
|
|
wl-330n | \
|
|
wl-330n3g | \
|
|
wl-351 | \
|
|
wli-tx4-ag300n | \
|
|
wnce2001 | \
|
|
wr512-3gn | \
|
|
wr6202 | \
|
|
mzk-w300nh2 | \
|
|
ur-326n4g | \
|
|
ur-336un | \
|
|
xdxrn502j)
|
|
rt2x00_eeprom_extract "factory" 0 272
|
|
;;
|
|
|
|
wl341v3)
|
|
rt2x00_eeprom_extract "board-nvram" 64880 272
|
|
;;
|
|
|
|
*)
|
|
rt2x00_eeprom_die "board $board is not supported yet"
|
|
;;
|
|
esac
|
|
;;
|
|
|
|
"rt2x00pci_1_0.eeprom")
|
|
case $board in
|
|
rt-n56u)
|
|
rt2x00_eeprom_extract "factory" 32768 272
|
|
;;
|
|
esac
|
|
;;
|
|
esac
|