mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 00:41:17 +00:00
e9f9cd14cc
Due to licensing uncertainty, we do not include the firmwares for the wireless chips used in the Raspberry Pi Zero 2 W. To have working wireless, follow the instructions below. For people building their own images: mkdir -p files/lib/firmware/brcm wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt Now build the OpenWrt image as usual, and it will include the firmware files in the correct location. For people using ext4 images: Write the ext4 image to the sdcard, then mount the 2nd partition and put the firmware files from the links above in /lib/firmware/brcm relative from the mount point where the partition is mounted. For people using squashfs images: Write the squashfs image to the sdcard, place it in the Raspberry Pi Zero 2 W, boot it and wait for the overlay filesystem to be created. Find the offset of the overlay filesystem in sysfs: # cat /sys/devices/virtual/block/loop0/loop/offset 25755648 Shut down the device, unplug the power and move the SD card to a Linux computer. Mount the 2nd partition of the sdcard as a loop device with the offset found earlier. sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp Put the firmware files from the links above in /upper/lib/firmware/brcm relative to the mount point where the loop device is mounted. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Peter van Dijk <peter@7bits.nl>
175 lines
5.4 KiB
Makefile
175 lines
5.4 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2012-2019 OpenWrt.org
|
|
# Copyright (C) 2016-2017 LEDE project
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
FAT32_BLOCK_SIZE=1024
|
|
FAT32_BLOCKS=$(shell echo $$(($(CONFIG_TARGET_KERNEL_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
|
|
|
|
define Build/Compile
|
|
$(CP) $(LINUX_DIR)/COPYING $(KDIR)/COPYING.linux
|
|
endef
|
|
|
|
### Image scripts ###
|
|
define Build/boot-common
|
|
rm -f $@.boot
|
|
mkfs.fat -n boot -C $@.boot $(FAT32_BLOCKS)
|
|
mcopy -i $@.boot $(KDIR)/COPYING.linux ::
|
|
mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
|
|
mcopy -i $@.boot cmdline.txt ::
|
|
mcopy -i $@.boot config.txt ::
|
|
mcopy -i $@.boot distroconfig.txt ::
|
|
mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)
|
|
$(foreach dts,$(shell echo $(DEVICE_DTS)),mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::;)
|
|
mmd -i $@.boot ::/overlays
|
|
mcopy -i $@.boot $(DTS_DIR)/overlays/*.dtbo ::/overlays/
|
|
mcopy -i $@.boot $(DTS_DIR)/overlays/README ::/overlays/
|
|
endef
|
|
|
|
define Build/boot-2708
|
|
mcopy -i $@.boot $(KDIR)/bootcode.bin ::
|
|
mcopy -i $@.boot $(KDIR)/start.elf ::
|
|
mcopy -i $@.boot $(KDIR)/start_cd.elf ::
|
|
mcopy -i $@.boot $(KDIR)/start_x.elf ::
|
|
mcopy -i $@.boot $(KDIR)/fixup.dat ::
|
|
mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
|
|
mcopy -i $@.boot $(KDIR)/fixup_x.dat ::
|
|
endef
|
|
|
|
define Build/boot-2711
|
|
mcopy -i $@.boot $(KDIR)/start4.elf ::
|
|
mcopy -i $@.boot $(KDIR)/start4cd.elf ::
|
|
mcopy -i $@.boot $(KDIR)/start4x.elf ::
|
|
mcopy -i $@.boot $(KDIR)/fixup4.dat ::
|
|
mcopy -i $@.boot $(KDIR)/fixup4cd.dat ::
|
|
mcopy -i $@.boot $(KDIR)/fixup4x.dat ::
|
|
endef
|
|
|
|
define Build/sdcard-img
|
|
./gen_rpi_sdcard_img.sh $@ $@.boot $(IMAGE_ROOTFS) \
|
|
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
|
|
endef
|
|
|
|
### Devices ###
|
|
define Device/Default
|
|
DEVICE_VENDOR := Raspberry Pi
|
|
KERNEL := kernel-bin
|
|
KERNEL_IMG := kernel.img
|
|
IMAGES := factory.img.gz sysupgrade.img.gz
|
|
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | sdcard-img | gzip | append-metadata
|
|
IMAGE/factory.img.gz := boot-common | boot-2708 | sdcard-img | gzip
|
|
endef
|
|
|
|
define Device/rpi
|
|
DEVICE_MODEL := B/B+/CM/Zero/ZeroW
|
|
DEVICE_DTS := \
|
|
bcm2708-rpi-b bcm2708-rpi-b-rev1 bcm2708-rpi-b-plus \
|
|
bcm2708-rpi-cm \
|
|
bcm2708-rpi-zero bcm2708-rpi-zero-w
|
|
SUPPORTED_DEVICES := \
|
|
rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w \
|
|
raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \
|
|
raspberrypi,compute-module raspberrypi,compute-module-1 \
|
|
raspberrypi,model-zero raspberrypi,model-zero-w
|
|
DEVICE_PACKAGES := \
|
|
cypress-firmware-43430-sdio \
|
|
cypress-nvram-43430-sdio-rpi-zero-w \
|
|
kmod-brcmfmac wpad-basic-wolfssl
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2708)
|
|
TARGET_DEVICES += rpi
|
|
endif
|
|
|
|
define Device/rpi-2
|
|
DEVICE_MODEL := 2B/2B 1.2
|
|
DEVICE_VARIANT := (32bit)
|
|
DEVICE_ALT0_VENDOR := Raspberry Pi
|
|
DEVICE_ALT0_MODEL := 3B/3B+/3CM
|
|
DEVICE_ALT0_VARIANT := (32bit)
|
|
DEVICE_ALT1_VENDOR := Raspberry Pi
|
|
DEVICE_ALT1_MODEL := 4B/400/4CM
|
|
DEVICE_ALT1_VARIANT := (32bit)
|
|
DEVICE_DTS := \
|
|
bcm2709-rpi-2-b bcm2710-rpi-2-b \
|
|
bcm2710-rpi-3-b bcm2710-rpi-3-b-plus \
|
|
bcm2711-rpi-4-b bcm2711-rpi-400 \
|
|
bcm2710-rpi-cm3 bcm2711-rpi-cm4 \
|
|
bcm2710-rpi-zero-2
|
|
SUPPORTED_DEVICES := \
|
|
rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm rpi-zero-2 \
|
|
raspberrypi,2-model-b raspberrypi,2-model-b-rev2 \
|
|
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
|
|
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
|
|
raspberrypi,400 raspberrypi,4-compute-module raspberrypi,4-model-b \
|
|
raspberrypi,model-zero-2
|
|
DEVICE_PACKAGES := \
|
|
cypress-firmware-43430-sdio \
|
|
cypress-nvram-43430-sdio-rpi-3b \
|
|
cypress-firmware-43455-sdio \
|
|
cypress-nvram-43455-sdio-rpi-3b-plus cypress-nvram-43455-sdio-rpi-4b \
|
|
kmod-brcmfmac wpad-basic-wolfssl
|
|
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip | append-metadata
|
|
IMAGE/factory.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2709)
|
|
TARGET_DEVICES += rpi-2
|
|
endif
|
|
|
|
define Device/rpi-3
|
|
DEVICE_MODEL := 3B/3B+/3CM
|
|
DEVICE_VARIANT := (64bit)
|
|
DEVICE_ALT0_VENDOR := Raspberry Pi
|
|
DEVICE_ALT0_MODEL := 2B-1.2
|
|
DEVICE_ALT0_VARIANT := (64bit)
|
|
KERNEL_IMG := kernel8.img
|
|
DEVICE_DTS := \
|
|
broadcom/bcm2710-rpi-2-b \
|
|
broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \
|
|
broadcom/bcm2710-rpi-cm3 \
|
|
broadcom/bcm2710-rpi-zero-2
|
|
SUPPORTED_DEVICES := \
|
|
rpi-3-b rpi-3-b-plus rpi-zero-2 \
|
|
raspberrypi,2-model-b-rev2 \
|
|
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
|
|
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
|
|
raspberrypi,model-zero-2
|
|
DEVICE_PACKAGES := \
|
|
cypress-firmware-43430-sdio \
|
|
cypress-nvram-43430-sdio-rpi-3b \
|
|
cypress-firmware-43455-sdio \
|
|
cypress-nvram-43455-sdio-rpi-3b-plus \
|
|
kmod-brcmfmac wpad-basic-wolfssl
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2710)
|
|
TARGET_DEVICES += rpi-3
|
|
endif
|
|
|
|
define Device/rpi-4
|
|
DEVICE_MODEL := 4B/400/4CM
|
|
DEVICE_VARIANT := (64bit)
|
|
KERNEL_IMG := kernel8.img
|
|
DEVICE_DTS := \
|
|
broadcom/bcm2711-rpi-400 \
|
|
broadcom/bcm2711-rpi-4-b \
|
|
broadcom/bcm2711-rpi-cm4
|
|
SUPPORTED_DEVICES := \
|
|
raspberrypi,400 \
|
|
raspberrypi,4-compute-module \
|
|
raspberrypi,4-model-b
|
|
DEVICE_PACKAGES := \
|
|
cypress-firmware-43455-sdio \
|
|
cypress-nvram-43455-sdio-rpi-4b \
|
|
kmod-brcmfmac wpad-basic-wolfssl \
|
|
kmod-usb-net-lan78xx
|
|
IMAGE/sysupgrade.img.gz := boot-common | boot-2711 | sdcard-img | gzip | append-metadata
|
|
IMAGE/factory.img.gz := boot-common | boot-2711 | sdcard-img | gzip
|
|
endef
|
|
ifeq ($(SUBTARGET),bcm2711)
|
|
TARGET_DEVICES += rpi-4
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|