mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
c6aac196b8
The pinctrl initialization fails with the MSM pinctrl code and gpio-hogs because either the gpio ranges are not yet initialized (missing gpio-range in DT) or that the msm driver unconditionally tries to re-initializes the ranges (gpio-range in DT). To allow gpio-hogs and similar early-boot gpio code, the gpio-ranges must be in the device tree and the pinctrl-msm code must check whether the range was already initialized by the DT. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [drop changes to unrelated dtsi files, refresh patches] Signed-off-by: Mathias Kresin <dev@kresin.me>
93 lines
2.6 KiB
Diff
93 lines
2.6 KiB
Diff
From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
|
|
From: Christian Lamparter <chunkeey@gmail.com>
|
|
Date: Sun, 20 Nov 2016 01:01:10 +0100
|
|
Subject: [PATCH] dts: ipq4019: add ethernet essedma node
|
|
|
|
This patch adds the device-tree node for the ethernet
|
|
interfaces.
|
|
|
|
Note: The driver isn't anywhere close to be upstream,
|
|
so the info might change.
|
|
|
|
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 60 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
|
|
@@ -28,6 +28,8 @@
|
|
spi1 = &spi_1;
|
|
i2c0 = &i2c_0;
|
|
i2c1 = &i2c_1;
|
|
+ ethernet0 = &gmac0;
|
|
+ ethernet1 = &gmac1;
|
|
};
|
|
|
|
cpus {
|
|
@@ -591,6 +593,64 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ edma@c080000 {
|
|
+ compatible = "qcom,ess-edma";
|
|
+ reg = <0xc080000 0x8000>;
|
|
+ qcom,page-mode = <0>;
|
|
+ qcom,rx_head_buf_size = <1540>;
|
|
+ qcom,mdio_supported;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,num_gmac = <2>;
|
|
+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
|
|
+ 0 66 IRQ_TYPE_EDGE_RISING
|
|
+ 0 67 IRQ_TYPE_EDGE_RISING
|
|
+ 0 68 IRQ_TYPE_EDGE_RISING
|
|
+ 0 69 IRQ_TYPE_EDGE_RISING
|
|
+ 0 70 IRQ_TYPE_EDGE_RISING
|
|
+ 0 71 IRQ_TYPE_EDGE_RISING
|
|
+ 0 72 IRQ_TYPE_EDGE_RISING
|
|
+ 0 73 IRQ_TYPE_EDGE_RISING
|
|
+ 0 74 IRQ_TYPE_EDGE_RISING
|
|
+ 0 75 IRQ_TYPE_EDGE_RISING
|
|
+ 0 76 IRQ_TYPE_EDGE_RISING
|
|
+ 0 77 IRQ_TYPE_EDGE_RISING
|
|
+ 0 78 IRQ_TYPE_EDGE_RISING
|
|
+ 0 79 IRQ_TYPE_EDGE_RISING
|
|
+ 0 80 IRQ_TYPE_EDGE_RISING
|
|
+ 0 240 IRQ_TYPE_EDGE_RISING
|
|
+ 0 241 IRQ_TYPE_EDGE_RISING
|
|
+ 0 242 IRQ_TYPE_EDGE_RISING
|
|
+ 0 243 IRQ_TYPE_EDGE_RISING
|
|
+ 0 244 IRQ_TYPE_EDGE_RISING
|
|
+ 0 245 IRQ_TYPE_EDGE_RISING
|
|
+ 0 246 IRQ_TYPE_EDGE_RISING
|
|
+ 0 247 IRQ_TYPE_EDGE_RISING
|
|
+ 0 248 IRQ_TYPE_EDGE_RISING
|
|
+ 0 249 IRQ_TYPE_EDGE_RISING
|
|
+ 0 250 IRQ_TYPE_EDGE_RISING
|
|
+ 0 251 IRQ_TYPE_EDGE_RISING
|
|
+ 0 252 IRQ_TYPE_EDGE_RISING
|
|
+ 0 253 IRQ_TYPE_EDGE_RISING
|
|
+ 0 254 IRQ_TYPE_EDGE_RISING
|
|
+ 0 255 IRQ_TYPE_EDGE_RISING>;
|
|
+
|
|
+ status = "disabled";
|
|
+
|
|
+ gmac0: gmac0 {
|
|
+ local-mac-address = [00 00 00 00 00 00];
|
|
+ vlan_tag = <1 0x1f>;
|
|
+ };
|
|
+
|
|
+ gmac1: gmac1 {
|
|
+ local-mac-address = [00 00 00 00 00 00];
|
|
+ qcom,phy_mdio_addr = <4>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ vlan_tag = <2 0x20>;
|
|
+ };
|
|
+ };
|
|
+
|
|
usb3_ss_phy: ssphy@9a000 {
|
|
compatible = "qca,uni-ssphy";
|
|
reg = <0x9a000 0x800>;
|