openwrt/package/boot
Daniel Groth 8c04a5c456 realtek: d-link: add support for dgs-1210-10mp
General hardware info:
-------------------------------------------------------------------------------

D-Link DGS-1210-10MP is a switch with 8 ethernet ports and 2 SFP ports, all
ports Gbit capable. It is based on a RTL8380 SoC @ 500MHz, DRAM 128MB and
32MB flash. All ethernet ports are 802.3af/at PoE capable
with a total PoE power budget of 130W.

File info:
-------------------------------------------------------------------------------
The dgs-1210-10mp is very similar to dgs-1210-10p so I used that as a start.

rtl838x.mk:
 - Removed lua-rs232 package since it was a leftover from the old rtl83xx-poe
   package.
 - Updated the soc to 8380.
 - Specified device variant: F.
 - Installed the new realtek-poe package.

rtl8380_d-link_dgs-1210-10mp.dts:
 - Moved dgs-1210 family common parts and non PoE related ports on rtl8231
   to the new device tree dtsi files.

Serial connection:
-------------------------------------------------------------------------------
The UART for the SoC (115200 8N1) is available close to the front panel next
to the LED/key card connector via unpopulated standard 0.1" pin header
marked j4. Pin1 is marked with arrow and square.

Pin 1: Vcc 3,3V
Pin 2: Tx
Pin 3: Rx
Pin 4: Gnd

Installation with TFTP from u-boot
-------------------------------------------------------------------------------
I originally used the install procedure:
'OpenWrt installation using the TFTP method and serial console access' found
in the device wiki for the dgs-1210-16.
< https://openwrt.org/toh/d-link/dgs-1210-16_g1#openwrt_installation_using
_the_tftp_method_and_serial_console_access >

About the realtek-poe package
-------------------------------------------------------------------------------
The realtek-poe package is installed but there isn't any automatic PoE config
setting at this time so for now the PoE config must be edited manually.

Original OEM hardware/firmware data at first installation
-------------------------------------------------------------------------------
It has been installed, developed, and tested on a device with these OEM
hardware and firmware versions.

- U-boot: 2011.12.(2.1.5.67086)-Candidate1 (Jun 22 2020 - 15:03:58)
- Boot version: 1.01.001
- Firmware version: 6.20.007
- Hardware version: F1

Things to be done when support are developed
-------------------------------------------------------------------------------
 - realtek-poe has been included in OpenWrt but the automatic config handling
   has not been solved yet so in the future there will probably be some minor
   updates for this device to handle the poe config.
 - LED link_act and poe are per function supposed to be connected to the PoE
   system.
   But some software development is also needed to make this LED work and
   shift the LED array between act and poe indication and to shift the mode
   lights with mode key.
 - LED poe_max should probably be used as straight forward error output from
   the realtek-poe package error handling. But no code has been written for
   this.
 - SFP is currently not hot pluggable. Development is under progress to get
   working I2C communication with SFP and have them hot pluggable.
   When any device in the dgs-1210 family gets this working, I expect it
   should be possible to implement the same solution in this device.

Signed-off-by: Daniel Groth <flygarn12@gmail.com>
[Capitalisation of abbreviations, DEVICE_VARIANT and update filenames,
device compatibles on single line]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-08-20 09:02:44 +02:00
..
arm-trusted-firmware-bcm63xx arm-trusted-firmware-bcm63xx: add ATF for Broadcom devices 2021-12-24 22:42:03 +01:00
arm-trusted-firmware-mediatek arm-trusted-firmware-mediatek: skip bad blocks on SPI-NAND (SNFI) 2022-08-12 22:16:00 +02:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: update cm3 gcc to 11.2 2022-07-31 18:53:24 +02:00
arm-trusted-firmware-rockchip atf-rockchip: update to 2.3 2020-07-28 15:52:44 +02:00
arm-trusted-firmware-sunxi sunxi: add support for H6 boards and OrangePiOnePlus 2021-04-11 23:14:55 +02:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: add patch to pass LDFLAGS 2021-02-10 19:19:18 +00:00
at91bootstrap at91bootstrap: update at91bootstrap v4 targets to v4.0.3 2022-07-11 00:50:18 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: add missing license 2022-04-04 18:15:02 +02:00
imx-bootlets imx-bootlets: refresh patches 2021-02-24 16:15:02 +01:00
kexec-tools kexec-tools: add kdump scripts util 2022-06-25 10:14:18 +02:00
kobs-ng kobs-ng: update dependencies after 'imx6' -> 'imx' rename 2021-11-03 12:45:40 +01:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
tfa-layerscape layerscape: update remaining PKG_HASH / PKG_MIRROR_HASH 2022-07-22 22:03:27 +02:00
uboot-at91 uboot-at91: fix build on buildbots 2022-07-13 09:00:59 +02:00
uboot-bcm4908 uboot-bcm4908: include SoC in output files 2022-07-25 18:13:12 +02:00
uboot-envtools realtek: d-link: add support for dgs-1210-10mp 2022-08-20 09:02:44 +02:00
uboot-fritz4040 uboot-fritz4040: Add support for Toshiba NAND 2022-05-14 11:08:45 +02:00
uboot-imx uboot-imx: pico-pi-imx7d: fix wrong make flags overriding 2022-07-12 09:25:43 +02:00
uboot-kirkwood uboot-kirkwood: refresh patches 2021-06-06 19:06:29 +02:00
uboot-lantiq uboot-lantiq: danube: fix hanging lzma kernel uncompression #2 2021-11-27 21:49:10 +01:00
uboot-layerscape uboot-layerscape: update PKG_HASH 2022-07-17 14:14:54 +02:00
uboot-mediatek uboot-mediatek: backport pinctrl fix to avoid error message 2022-08-11 17:11:48 +02:00
uboot-mvebu uboot-mvebu: update to v2022.07 2022-07-31 18:53:23 +02:00
uboot-mxs u-boot.mk: always link host libraries static 2021-10-24 18:00:49 +02:00
uboot-omap uboot-omap: Remove omap3_overo configuration 2021-11-28 22:26:27 +01:00
uboot-oxnas treewide: use AUTORELEASE on all uboot-* packages 2021-10-02 21:26:12 +02:00
uboot-rockchip uboot-rockchip: drop CONFIG_IDENT_STRING 2022-06-19 12:31:02 +02:00
uboot-sunxi uboot-sunxi: add support for FriendlyARM NanoPi R1S H5 2021-10-30 21:17:20 +02:00
uboot-tegra treewide: use AUTORELEASE on all uboot-* packages 2021-10-02 21:26:12 +02:00
uboot-zynq u-boot.mk: always link host libraries static 2021-10-24 18:00:49 +02:00