mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 16:31:13 +00:00
dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
45 lines
780 B
Bash
Executable File
45 lines
780 B
Bash
Executable File
#!/bin/sh
|
|
|
|
APM821XX_BOARD_NAME=
|
|
APM821XX_MODEL=
|
|
|
|
apm821xx_board_detect() {
|
|
local model
|
|
local name
|
|
|
|
model=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /model/ {print $2}' /proc/cpuinfo)
|
|
|
|
case "$model" in
|
|
*"Meraki MR24 Access Point")
|
|
name="mr24"
|
|
;;
|
|
|
|
*"MyBook Live"*)
|
|
name="mbl"
|
|
;;
|
|
|
|
*)
|
|
name="unknown"
|
|
;;
|
|
esac
|
|
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
[ -z "$APM821XX_BOARD_NAME" ] && APM821XX_BOARD_NAME="$name"
|
|
[ -z "$APM821XX_MODEL" ] && APM821XX_MODEL="$model"
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
echo "$APM821XX_BOARD_NAME" > /tmp/sysinfo/board_name
|
|
echo "$APM821XX_MODEL" > /tmp/sysinfo/model
|
|
}
|
|
|
|
apm821xx_board_name() {
|
|
local name
|
|
|
|
[ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
echo "$name"
|
|
}
|