mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
fce21ae4cc
Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
30 lines
1.1 KiB
Diff
30 lines
1.1 KiB
Diff
From b34475b447c7e97fa9c4a854849f6e856fe59931 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 23 Feb 2016 17:26:48 +0000
|
|
Subject: [PATCH] amba_pl011: Don't use DT aliases for numbering
|
|
|
|
The pl011 driver looks for DT aliases of the form "serial<n>",
|
|
and if found uses <n> as the device ID. This can cause
|
|
/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the
|
|
other serial port is provided by the 8250 driver which doesn't
|
|
use the same logic.
|
|
---
|
|
drivers/tty/serial/amba-pl011.c | 5 +++++
|
|
1 file changed, 5 insertions(+)
|
|
|
|
--- a/drivers/tty/serial/amba-pl011.c
|
|
+++ b/drivers/tty/serial/amba-pl011.c
|
|
@@ -2441,7 +2441,12 @@ static int pl011_setup_port(struct devic
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
+ /* Don't use DT serial<n> aliases - it causes the device to
|
|
+ be renumbered to ttyAMA1 if it is the second serial port in the
|
|
+ system, even though the other one is ttyS0. The 8250 driver
|
|
+ doesn't use this logic, so always remains ttyS0.
|
|
index = pl011_probe_dt_alias(index, dev);
|
|
+ */
|
|
|
|
uap->old_cr = 0;
|
|
uap->port.dev = dev;
|