openwrt/target/linux/generic/patches-4.4/726-phy_rtl8366.patch
Mathias Kresin d165f1f3bc kernel: move Lantiq PEF7061/7071/7072 phy driver to generic
The driver is used for boards outside the lantiq target as well. Move
it to generic to make it available for more targets.

The phy driver is included in kernel 4.8 as INTEL_XWAY_PHY.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-24 22:36:38 +02:00

46 lines
1.3 KiB
Diff

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -299,6 +299,30 @@ config MDIO_BCM_IPROC
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
+config RTL8366_SMI
+ tristate "Driver for the RTL8366 SMI interface"
+ depends on GPIOLIB
+ ---help---
+ This module implements the SMI interface protocol which is used
+ by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366_SMI_DEBUG_FS
+ bool "RTL8366 SMI interface debugfs support"
+ depends on DEBUG_FS
+ default n
+
+config RTL8366S_PHY
+ tristate "Driver for the Realtek RTL8366S switch"
+ select SWCONFIG
+
+config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
+endif # RTL8366_SMI
+
endif # PHYLIB
config MICREL_KS8995MA
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o