David Ignjic 4779e954fa mediatek: filogic: add support for Cudy WR3000S v1 ... Hardware -------- MediaTek MT7981 WiSoC 256MB DDR3 RAM 128MB SPI-NAND (XMC XM25QH128C) MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5) UART: 115200 8N1 3.3V MAC: LAN MAC: label mac WAN MAC: label mac + 1 2.4G MAC: label mac 5G MAC: label mac + 1 with LA bit set Installation ------------ 1. Connect to the serial port as described in the "Hardware" section. 2. Power on the device + press reset pin. Keep pressing reset pin to enter the U-Boot shell. 3. Download the OpenWrt initramfs image. Place it on an TFTP server connected to the Cudy LAN ports. Make sure the server is reachable at 192.168.1.88. Rename the image to "cudy3000s.bin" 4. Download and boot the OpenWrt initramfs image. $ tftpboot 0x46000000 cudy3000s.bin; bootm 0x46000000 5. Transfer the OpenWrt sysupgrade image to the device using scp. Install with sysupgrade. Signed-off-by: David Ignjic <ignjic@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16939 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit faf4b3e0f7) Link: https://github.com/openwrt/openwrt/pull/17097 Signed-off-by: Petr Štetiar <ynezz@true.cz>		2024-11-28 18:49:15 +00:00
..
imagebuilder	imagebuilder: fix OPKG package_whatdepends support	2024-11-20 09:49:57 +01:00
linux	mediatek: filogic: add support for Cudy WR3000S v1	2024-11-28 18:49:15 +00:00
llvm-bpf	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
sdk	sdk: bundle libraries for llvm toolchain	2024-10-19 20:43:54 +02:00
toolchain	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
Config.in	loongarch64: new target	2024-05-04 14:14:16 +08:00
Makefile	build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies	2024-03-03 23:13:59 +01:00