ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 07:46:48 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
476bf135fc
openwrt/scripts
History
David Bauer 476bf135fc mediatek: add support for ZyXEL NWA50AX Pro 
Hardware
--------
CPU:    Mediatek MT7981
RAM:    512M DDR4
FLASH:  256M NAND
ETH:    MaxLinear GPY211 (2.5GbE N Base-T)
WiFi:   Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax)
BTN:    1x Reset
LED:    1x Multi-Color

UART Console
------------
Available below the rubber cover next to the ethernet port.

Settings: 115200 8N1

Layout:

<12V> <LAN> GND-RX-TX-VCC

Logic-Level is 3V3. Don't connect VCC to your UART adapter!

Installation Web-UI
-------------------
Upload the Factory image using the devices Web-Interface.

As the device uses a dual-image partition layout, OpenWrt can only
installed on Slot A. This requires the current active image prior
flashing the device to be on Slot B.

In case this is not the case, OpenWrt will boot only one time, returning
to the ZyXEL firmware the second boot.

If this happens, first install a ZyXEL firmware upgrade of any version
and install OpenWrt after that.

Installation TFTP / Recovery
----------------------------
This installation routine is especially useful in case of a bricked
device.

Attach to the UART console header of the device. Interrupt the boot
procedure by pressing Enter.

The bootloader has a reduced command-set available from CLI, but more
commands can be executed by abusing the atns command.

Boot a OpenWrt initramfs image available on a TFTP server at
192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin.

 $ atnf nwa50axpro-openwrt-initramfs.bin
 $ atna 192.168.1.88
 $ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff;
   bootm"

Upon booting, set the booted image to the correct slot:

 $ zyxel-bootconfig /dev/mtd9 get-status
 $ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid
 $ zyxel-bootconfig /dev/mtd9 set-active-image 0

Copy the OpenWrt sysupgrade image to the device using scp.
Write the sysupgrade image to NAND using sysupgrade.

 $ sysupgrade -n image.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f0445746f6)
2023-07-23 16:10:08 +02:00
..
config build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
flashing scripts: eva_ramboot.py: remove unused import 2021-10-30 15:00:22 +02:00
arm-magic.sh scripts/arm-magic.sh: switch to /bin/sh 2020-01-02 23:59:20 +01:00
brcmImage.pl merge: targets: update image generation and targets 2017-12-08 19:41:18 +01:00
bundle-libraries.sh scripts: bundle-libraries.sh: fix broken SDK compiler 2020-11-02 08:39:49 +01:00
cameo-imghdr.py scripts: add cameo image header generator 2022-06-28 22:20:09 +02:00
cameo-tag.py scripts: fix CAMEO tag generator 2022-07-05 10:18:06 +02:00
cfe-bin-header.py scripts: cfe-bin-header: fix shebang 2020-05-19 08:05:22 +02:00
cfe-partition-tag.py scripts: format to black 2022-04-16 14:53:17 +02:00
cfe-wfi-tag.py scripts: format to black 2022-04-16 14:53:17 +02:00
check-toolchain-clean.sh check-toolchain-clean.sh: workaround stray rebuilds 2022-02-28 15:17:11 +01:00
checkpatch.pl scripts: fix various typos 2021-10-31 21:24:47 +01:00
clean-package.sh build: Fix directory symlinks not removed when cleaning STAGING_DIR 2020-03-01 21:35:59 +01:00
cleanfile build: remove absolute path to perl and replace with /usr/bin/env perl 2017-05-02 14:33:58 +02:00
cleanpatch build: remove absolute path to perl and replace with /usr/bin/env perl 2017-05-02 14:33:58 +02:00
combined-ext-image.sh build: introduce $(MKHASH) 2021-05-13 15:13:15 +02:00
combined-image.sh build: introduce $(MKHASH) 2021-05-13 15:13:15 +02:00
command_all.sh treewide: drop use of which 2022-01-17 09:14:26 +01:00
config.guess scripts: config.guess: update to 2021-05-24 2021-05-29 13:03:07 +02:00
config.rpath add config.rpath and link it in autotools.mk if missing, some packages might need it, especially users of lib-link.m4 or iconv.m4 2011-02-27 15:39:27 +00:00
config.sub scripts: config.guess: update to 2021-05-24 2021-05-29 13:03:07 +02:00
const_structs.checkpatch scripts: add const_structs.checkpatch for checkpatch.pl 2020-11-18 21:50:58 +01:00
deptest.sh scripts: avoid hard-coded paths in scripts 2016-04-28 16:43:28 +02:00
diffconfig.sh scripts/diffconfig.sh: ensure config/conf is built 2022-02-26 13:36:30 +01:00
dl_cleanup.py scripts: fix dl_cleanup.py argument handling 2022-11-15 14:45:50 +01:00
dl_github_archive.py scripts/dl_github_archieve.py: fix generating unreproducible tar 2023-01-12 14:59:07 +01:00
download.pl scripts: add Apache fastly mirror 2023-01-07 01:32:58 +01:00
dump-target-info.pl scripts: dump-target-info print kernel versions 2021-12-29 14:06:10 +01:00
env scripts/env: fix env for git conf init.defaultBranch not set to "master" 2021-11-13 10:29:41 -10:00
ext-toolchain.sh scripts: ext-toolchain: add support for musl 2022-07-24 19:53:45 +02:00
ext-tools.sh scripts: ext-tools: add option to only refresh timestamps 2023-01-23 19:18:05 +01:00
feeds feeds: use git-src-full to allow Git versioning 2022-02-15 00:24:24 +01:00
fixup-makefile.pl fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhere 2018-07-05 01:30:57 +08:00
functions.sh images: Fix sysupgrade.tar for devices with NOR flash 2020-12-22 19:11:50 +01:00
gen_image_generic.sh scripts: gen_image_generic: allow the partition types to be set 2023-06-13 14:12:27 +02:00
gen-dependencies.sh scripts/gen-dependencies.sh: use /bin/sh 2020-01-01 17:01:02 +01:00
get_source_date_epoch.sh build: get_source_date_epoch allow external repos 2020-08-31 11:18:06 +01:00
getver.sh scripts/getver.sh: silence rev-list errors 2020-11-02 08:39:49 +01:00
ipkg-build build: use numeric-owner in ipkg-build 2022-04-19 22:59:50 +02:00
ipkg-make-index.sh Revert "scripts: run ipkg-make-index through shellcheck" 2023-05-09 21:32:26 +02:00
ipkg-remove scripts: ipkg-remove: handle existing .ipk files without SourceName field 2019-01-21 16:35:40 +01:00
json_add_image_info.py build: fix generation of large .vdi images 2023-07-15 22:24:50 +02:00
json_overview_image_info.py scripts: fix various typos 2021-10-31 21:24:47 +01:00
kconfig.pl scripts/kconfig.pl: allow regex syntax in filtering out config entries 2020-11-13 13:17:53 +01:00
linksys-image.sh scripts: remove redundant character '0x0a' from Linksys image signature 2022-11-27 13:18:29 +01:00
make-ipkg-dir.sh branding: add LEDE branding 2016-03-24 22:40:13 +01:00
md5sum improve support for building on mac os x by improving detection of missing components 2009-01-25 19:00:43 +00:00
metadata.pm base-files, metadata: support additional group membership 2021-10-28 16:27:21 +01:00
mkhash.c mkhash: fix build errors on FreeBSD 13.0 2022-03-05 18:01:04 +01:00
mkits-qsdk-ipq-image.sh build: add helpers for generating QSDK sysupgrade compatible images 2019-02-25 17:36:16 +01:00
mkits-zyxel-fit-filogic.sh mediatek: add support for ZyXEL NWA50AX Pro 2023-07-23 16:10:08 +02:00
mkits-zyxel-fit.sh ramips: add support for ZyXEL NWA50AX / NWA55AXE 2022-07-20 21:52:06 +02:00
mkits.sh scripts/mkits.sh: DT overlays don't need a loadaddr 2023-07-13 12:05:28 +01:00
netgear-encrypted-factory.py image: add additional fields to Netgear encrypted image 2023-07-13 12:05:28 +01:00
om-fwupgradecfg-gen.sh build: introduce $(MKHASH) 2021-05-13 15:13:15 +02:00
package-metadata.pl scripts: package-metadata add pkgmanifestjson call 2021-09-23 21:57:22 -10:00
pad_image scripts: fix various typos 2021-10-31 21:24:47 +01:00
patch-kernel.sh scripts/patch-kernel.sh: remove -E flag to preserve empty files touched by patches 2015-08-25 07:46:32 +00:00
patch-specs.sh toolchain: Add GCC 9.1.0 release 2019-06-16 16:40:08 +02:00
portable_date.sh scripts: fix GNU data invocation 2016-02-01 10:43:27 +00:00
qemustart scripts: qemustart: change armvirt references to armsr 2023-06-13 14:14:34 +02:00
redboot-script.pl scripts: avoid hard-coded paths in scripts 2016-04-28 16:43:28 +02:00
relink-lib.sh base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs 2011-03-01 05:40:38 +00:00
remote-gdb Fix handling of BUILD_SUFFIX in remote-gdb script 2019-09-01 18:38:05 +02:00
rstrip.sh scripts/rstrip.sh: do not strip .o files with STRIP_KMOD 2021-10-11 11:49:14 +02:00
sercomm-crypto.py scripts: support Sercomm crypto 2020-06-02 08:37:54 +02:00
sercomm-kernel-header.py scripts: sercomm-kernel-header.py: improve compatibility 2023-06-17 12:59:37 +02:00
sercomm-partition-tag.py scripts: support Sercomm partition tags 2020-06-02 08:33:11 +02:00
sercomm-payload.py scripts: sercomm-payload: add PID file support 2023-04-09 09:55:57 +02:00
sercomm-pid.py scripts: sercomm-pid: add bmips support 2023-04-09 10:01:03 +02:00
sign_images.sh scripts: fix various typos 2021-10-31 21:24:47 +01:00
size_compare.sh scripts: size_compare: print a grand total 2023-02-03 21:22:49 +01:00
slugimage.pl scripts: fix various typos 2021-10-31 21:24:47 +01:00
spelling.txt scripts: add spelling.txt for checkpatch.pl 2020-11-12 18:21:55 +01:00
srecimage.pl treewide: replace jow@openwrt.org with jo@mein.io 2016-06-07 11:42:52 +02:00
strip-kmod.sh scripts/strip-kmod.sh: harmonize leading whitespaces 2019-12-31 11:41:07 +01:00
symlink-tree.sh scripts/symlink-tree.sh: use /bin/sh 2019-12-31 11:43:15 +01:00
sysupgrade-tar.sh images: fix boot failures on NAND with small sub pages 2019-09-14 11:43:19 +02:00
target-metadata.pl base-files: add eMMC sysupgrade support 2021-12-02 20:42:58 +00:00
time.pl scripts: time.pl: Don't print the time on stderr 2019-07-03 07:45:00 +02:00
timestamp.pl fix timestamp checks for build system paths which have '.svn' in their directory name 2010-04-14 22:21:15 +00:00
ubinize-image.sh treewide: drop use of which 2022-01-17 09:14:26 +01:00
xxdi.pl scripts: xxdi.pl: add xxd -i compat mode 2022-09-06 08:04:53 +02:00