openwrt/package/system
Mohammad Sayful Islam 46a2490e8f ipq807x: add support for Linksys MX4200 V1 and V2
Linksys MX4200 is a 802.11ax Tri-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz
* RAM: 512MB of DDR3
* Storage: 512Mb NAND
* Ethernet: 4x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
	* 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
* LED-s:
	* RGB system led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition
fw_printenv -n boot_part

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel

Replace (X) with your model version either 1 or 2

Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2024-01-06 16:13:23 +01:00
..
ca-certificates ca-certificates: Update to version 20230311 2023-05-27 22:51:18 +02:00
fstools fstools: bump to git HEAD 2023-11-09 11:15:42 +00:00
fwtool fwtool: update to latest Git head 2019-11-14 22:53:31 +01:00
gpio-cdev/nu801 ath79: add Cisco Meraki MR18 2023-05-14 00:08:35 +02:00
iucode-tool treewide: Add extra CPE identifier 2023-09-25 23:06:33 +02:00
mtd ipq807x: add support for Linksys MX4200 V1 and V2 2024-01-06 16:13:23 +01:00
openwrt-keyring openwrt-keyring: add OpenWrt 22.03 GPG/usign keys 2022-03-25 14:28:00 +01:00
opkg treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
procd procd: update to Git HEAD (2023-11-28) 2023-11-30 19:19:40 +01:00
refpolicy Revert "refpolicy: add variant that builds modular policy" 2020-11-22 15:20:35 +00:00
rpcd rpcd: update to latest git HEAD 2023-07-01 12:14:07 +02:00
selinux-policy selinux-policy: update to 1.2.5 2023-05-31 22:00:48 +02:00
ubox ubox: update to Git HEAD (2023-11-30) 2023-11-30 13:53:14 +01:00
ubus ubus: update to Git HEAD (2023-11-28) 2023-11-28 13:57:34 +01:00
ucert ucert: update to latest git HEAD 2020-05-24 17:01:36 +02:00
uci uci: fix Makefile formatting 2023-10-01 23:18:02 +03:00
urandom-seed treewide: disable QUILT refresh for unsupported packages 2023-10-20 16:13:13 +02:00
urngd urngd: update to version 2023-11-01 2023-11-01 22:10:46 +01:00
usign treewide: add support for "lto" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
zram-swap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00