openwrt/package/boot
Mohammad Sayful Islam 46a2490e8f ipq807x: add support for Linksys MX4200 V1 and V2
Linksys MX4200 is a 802.11ax Tri-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz
* RAM: 512MB of DDR3
* Storage: 512Mb NAND
* Ethernet: 4x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
	* 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
* LED-s:
	* RGB system led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition
fw_printenv -n boot_part

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel

Replace (X) with your model version either 1 or 2

Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2024-01-06 16:13:23 +01:00
..
apex boot/apex: Restore the APEX boot loader 2023-10-20 13:26:45 +02:00
arm-trusted-firmware-bcm63xx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
arm-trusted-firmware-mediatek uboot-mediatek: add initial Zyxel EX5601-T0 support 2023-11-25 14:51:21 +01:00
arm-trusted-firmware-mvebu arm-trusted-firmware-mvebu: bump to v2.9 2023-08-26 00:11:48 +02:00
arm-trusted-firmware-rockchip arm-trusted-firmware-rockchip: add m0 gcc toolchain 2023-06-25 22:52:15 +02:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Update to 2.10 2023-12-20 10:53:48 +08:00
arm-trusted-firmware-tools arm-trusted-firmware-tools: fix build on macOS/Darwin 2023-08-12 16:45:47 +02:00
at91bootstrap treewide: Add extra CPE identifier 2023-09-25 23:06:33 +02:00
fconfig treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
grub2 grub2: opt-out of gc-sections usage 2023-07-14 23:56:58 +02:00
imx-bootlets imx-bootlets: refresh patches 2021-02-24 16:15:02 +01:00
kexec-tools treewide: add support for "gc-sections" in PKG_BUILD_FLAGS 2023-03-21 18:28:22 +01:00
kobs-ng kobs-ng: update dependencies after 'imx6' -> 'imx' rename 2021-11-03 12:45:40 +01:00
mt7623n-preloader mt7623n-preloader: remove mt7622-preloader 2021-02-28 04:12:23 +00:00
opensbi opensbi: add package for RISC-V 2023-05-28 13:19:11 +02:00
rkbin rkbin: add new TF-A package for rk35xx 2023-11-26 19:44:56 +01:00
tfa-layerscape tfa-layerscape: fix fiptool's build 2023-05-20 23:20:48 +02:00
uboot-armsr uboot-armsr: add support for QEMU armv7/armv8 2023-06-10 21:50:22 +02:00
uboot-at91 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-bcm53xx uboot-bcm53xx: Add U-Boot for NorthStar BCM53xx 2023-08-20 18:08:13 +02:00
uboot-bcm4908 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-envtools ipq807x: add support for Linksys MX4200 V1 and V2 2024-01-06 16:13:23 +01:00
uboot-fritz4040 treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-imx treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-kirkwood treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-lantiq treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-layerscape package: layerscape: change loadaddr address 2023-05-28 20:22:23 +02:00
uboot-mediatek uboot-mediatek: use intree dtc explicitly 2023-11-26 19:44:56 +01:00
uboot-mvebu uboot-mvebu: armada 388 clearfog: support additional ddr configurations 2023-10-22 10:52:40 +02:00
uboot-mxs mxs: rework image generation 2023-06-30 19:24:52 +02:00
uboot-omap treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-oxnas treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-rockchip uboot-rockchip: add NanoPi R5C support 2023-11-26 19:44:56 +01:00
uboot-sifiveu uboot-sifiveu: use intree dtc explicitly 2023-11-26 19:44:56 +01:00
uboot-sunxi uboot-sunxi: use intree dtc explicitly 2023-11-26 19:44:56 +01:00
uboot-tegra treewide: replace AUTORELEASE with real PKG_RELEASE 2023-05-18 11:35:29 +02:00
uboot-zynq uboot-zynq: build with zynq generic subtarget 2022-12-25 11:55:53 +01:00