openwrt/target/linux/mediatek/image
Tianling Shen cc6c3a6ee8 mediatek: add support for OpenEmbed SOM7981
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 256 MiB SPI-NAND, 32 GB eMMC optional
  RAM: 0.5/1 GB DDR4
  Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B)
  WiFi: MediaTek MT7976C
  USB: 1x USB 3.0
  GPIO: 26-Pin header
  UART: 6 GND, 8 TX, 10 RX (in Pin header)
  Button: Reset, WPS
  Power: Type-C PD

Installation:
The board comes with a third-party custom OpenWrt image, you can upload
sysupgrade image via LuCI directly WITHOUT keeping configurations.

Or power on the board with pressing reset button for 5 second, then visit
http://192.168.1.1 and upload -factory.bin firmware.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2024-03-31 20:20:59 +02:00
..
filogic.mk mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
gen_scatterfile.sh target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
Makefile image: add additional fields to Netgear encrypted image 2023-07-01 14:42:11 +02:00
mt7622.mk mediatek: Moved recovery image creation to include/image-commands.mk 2024-03-31 19:01:20 +02:00
mt7623.mk mediatek: fix build failure of mt7623/mt7629 using kernel 6.6 2024-03-16 15:25:05 +08:00
mt7629.mk mediatek: fix build failure of mt7623/mt7629 using kernel 6.6 2024-03-16 15:25:05 +08:00