mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
4648a60058
The Unielec U7623 doesn't have a physical power button; I think it's hard
wired so that it turns on automatically when power is applied (unlike the
Banana Pi R2 which is a pain).
So the 'reset on long press of power button' behaviour that we get when
we enable the PMIC keyboard driver is kind of unhelpful. Disable it.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Fixes: 0d3f3323a2 ("mediatek: mt7623: enable more hardware features")
344 lines
6.1 KiB
Plaintext
344 lines
6.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
|
/*
|
|
* Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "mt7623.dtsi"
|
|
#include "mt6323.dtsi"
|
|
|
|
/ {
|
|
compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
|
|
|
|
aliases {
|
|
serial2 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs console=ttyS0,115200 blkdevparts=mmcblk0:3M@6M(recovery),256M@9M(root)";
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@1 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@2 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
|
|
cpu@3 {
|
|
proc-supply = <&mt6323_vproc_reg>;
|
|
};
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_pins_a>;
|
|
|
|
factory {
|
|
label = "factory";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_pins_unielec>;
|
|
|
|
led3 {
|
|
label = "u7623-01:green:led3";
|
|
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led4 {
|
|
label = "u7623-01:green:led4";
|
|
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "trgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mt7530: switch@0 {
|
|
compatible = "mediatek,mt7530";
|
|
};
|
|
};
|
|
};
|
|
|
|
&mt7530 {
|
|
compatible = "mediatek,mt7530";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
pinctrl-names = "default";
|
|
mediatek,mcm;
|
|
resets = <ðsys 2>;
|
|
reset-names = "mcm";
|
|
core-supply = <&mt6323_vpa_reg>;
|
|
io-supply = <&mt6323_vemc3v3_reg>;
|
|
|
|
dsa,mii-bus = <&mdio>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan0";
|
|
cpu = <&cpu_port0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
cpu = <&cpu_port0>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
cpu = <&cpu_port0>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
cpu = <&cpu_port0>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "wan";
|
|
cpu = <&cpu_port0>;
|
|
};
|
|
|
|
cpu_port0: port@6 {
|
|
reg = <6>;
|
|
label = "cpu";
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "trgmii";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
max-frequency = <50000000>;
|
|
cap-mmc-highspeed;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
};
|
|
|
|
&pio {
|
|
key_pins_a: keys-alt {
|
|
pins-keys {
|
|
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
|
|
<MT7623_PIN_257_GPIO257_FUNC_GPIO257>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
led_pins_unielec: leds-unielec {
|
|
pins-leds {
|
|
pinmux = <MT7623_PIN_14_GPIO14_FUNC_GPIO14>,
|
|
<MT7623_PIN_15_GPIO15_FUNC_GPIO15>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0 {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
|
|
<MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
|
|
<MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
|
|
<MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
|
|
<MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
|
|
<MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
|
|
<MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
|
|
<MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
|
|
<MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_clk {
|
|
pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
|
|
drive-strength = <MTK_DRIVE_2mA>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins_rst {
|
|
pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pcie_default: pcie_pin_default {
|
|
pins_cmd_dat {
|
|
pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
|
|
<MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwrap {
|
|
mt6323 {
|
|
mt6323led: led {
|
|
compatible = "mediatek,mt6323-led";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
label = "led0";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mt6323keys {
|
|
mediatek,long-press-mode = <0>;
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins_b>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy2 {
|
|
status = "okay";
|
|
mediatek,phy-switch = <&hifsys>;
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_default>;
|
|
status = "okay";
|
|
|
|
pcie@1,0 {
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@2,0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pcie1_phy {
|
|
status = "okay";
|
|
};
|
|
|