cb85aea869
After the switch to Kernel 5.10 the old files are no longer required. Signed-off-by: Paul Spooren <mail@aparcar.org> |
||
|---|---|---|
| .. | ||
| base-files/etc | ||
| files/arch/um/include/uapi/asm | ||
| image | ||
| patches-5.10 | ||
| config-5.10 | ||
| Makefile | ||
| README.md | ||
OpenWrt inside a user mode linux
Why would we even want this many ask?
There are potentially a lot of reasons, one obvious one to me, it allows folks to 'kick the tires' without actually flashing up any hardware. It's also a great environment for porting over packages, you can get a package fully functional in the uclibc root environment inside a uml without actually disturbing your 'real router', and then rebuild for a specific target once it's fully tested.
This is a first stab at a build that 'just works' and there will be more cleanup to come. The simple directions are:-
- Configure for uml target
- Configure with an ext4 or squashfs root file system
- Build it all
In your bin directory you will find a Kernel and an root file system when it's finished. Just run it like this:-
./openwrt-uml-vmlinux ubd0=openwrt-uml-squashfs.img
The uml will start and eventually the serial console of the uml will be at your
console prompt. If you would like it in xterms, substitute con=xterm and
con0=xterm. No networking is configured but it's a starting point. The
resulting file system has just enough free space to start kicking the tires and
playing in the world of 'embedded routers' along with all the resource
restrictions that come with that world.
To configure networking and more refer to the user mode linux documentation
online. A quick start goes along this line. Install the uml-utilities
packages so you have the uml_switch in and running, then add a command param
to your uml start like this:
eth0=daemon,00:01:01:01:01:01,unix,/<your uml switch control socket here>
With that in, and uml networking actually functional (can be a challenge at
times), you should be able to ifconfig the interface and talk to the host
side or if you bridged the uml switch to your host network, you should be able
to run udhcp and be away with networking off to the world. Again, if you are
unfamiliar with uml and uml networking, please read the docs and how-to stuff
available on the net. It does take some fiddling to get it started and working
right the first time, but after that, it opens up a whole new world of virtual
machines.