openwrt/target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr.dts
Daniel Golle c067b1e79b
mediatek: move out-of-tree DTS files to dedicated dts folder
Use dedicated dts folder like on ramips to store device tree source
files for boards not already supported in vanilla Linux.
Doing so instead of having them in files-* has several advantages:
 * we don't need to duplicate them for several kernel versions
 * changes to a device tree don't trigger a complete kernel rebuild
 * the files are more obvious to find

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-19 00:05:53 +00:00

328 lines
5.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
/ {
model = "Ubiquiti UniFi 6 LR";
compatible = "ubnt,unifi-6-lr", "mediatek,mt7622";
aliases {
led-boot = &led_blue;
led-failsafe = &led_blue;
led-running = &led_blue;
led-upgrade = &led_blue;
label-mac-device = &gmac0;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512 console=ttyS0,115200n8";
};
cpus {
cpu@0 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
cpu@1 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
};
gpio-keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&pio 62 GPIO_ACTIVE_LOW>;
};
};
memory {
reg = <0 0x40000000 0 0x3f000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
status = "okay";
};
&slot0 {
wifi@0,0 {
reg = <0x0 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x20000>;
mtd-mac-address = <&eeprom 0x6>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pio {
eth_pins: eth-pins {
mux {
function = "eth";
groups = "mdc_mdio", "rgmii_via_gmac2";
};
};
pcie0_pins: pcie0-pins {
mux {
function = "pcie";
groups = "pcie0_pad_perst",
"pcie0_1_waken",
"pcie0_1_clkreq";
};
};
pcie1_pins: pcie1-pins {
mux {
function = "pcie";
groups = "pcie1_pad_perst",
"pcie1_0_waken",
"pcie1_0_clkreq";
};
};
pmic_bus_pins: pmic-bus-pins {
mux {
function = "pmic";
groups = "pmic_bus";
};
};
spi_nor_pins: spi-nor-pins {
mux {
function = "flash";
groups = "spi_nor";
};
};
uart0_pins: uart0-pins {
mux {
function = "uart";
groups = "uart0_0_tx_rx" ;
};
};
uart3_pins: uart3-pins {
mux {
function = "uart";
groups = "uart3_1_tx_rx" ;
};
};
i2c0_pins: i2c0-pins {
mux {
function = "i2c";
groups = "i2c0";
};
};
watchdog_pins: watchdog-pins {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&bch {
status = "okay";
};
&btif {
status = "disabled";
};
&eth {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
mtd-mac-address = <&eeprom 0x0>;
fixed-link {
speed = <2500>;
full-duplex;
};
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@8 {
/* Marvell AQRate AQR112W - no driver */
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x8>;
};
};
};
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
status = "okay";
};
&nor_flash {
pinctrl-names = "default";
pinctrl-0 = <&spi_nor_pins>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "preloader";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "atf";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "u-boot";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "u-boot-env";
reg = <0xc0000 0x10000>;
};
factory: partition@d0000 {
label = "factory";
reg = <0xd0000 0x40000>;
read-only;
};
eeprom: partition@110000 {
label = "eeprom";
reg = <0x110000 0x10000>;
read-only;
};
partition@120000 {
label = "bs";
reg = <0x120000 0x10000>;
};
partition@130000 {
label = "cfg";
reg = <0x130000 0x100000>;
read-only;
};
partition@230000 {
compatible = "denx,fit";
label = "firmware";
reg = <0x230000 0x1ee0000>;
};
partition@2110000 {
label = "kernel1";
reg = <0x2110000 0x1ee0000>;
};
};
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "okay";
/* MT7915 Bluetooth */
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
led-controller@30 {
compatible = "ubnt,ledbar";
reg = <0x30>;
enable-gpio = <&pio 59 0>;
red {
label = "red";
};
green {
label = "green";
};
led_blue: blue {
label = "blue";
};
};
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
&wmac {
mediatek,mtd-eeprom = <&factory 0x0>;
mtd-mac-address = <&eeprom 0x0>;
status = "okay";
};