mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
620aa80064
This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X
v1.
Stock U-Boot UBI size: 50 MiB
OpenWrt U-boot UBI size: 126 MiB
Install
-------
1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt
initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10,
12 and 14).
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation
2. Make backups:
```
cat /dev/mtd0 > /tmp/boot.bin
cat /dev/mtd5 > /tmp/tp_data.bin
```
Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to
your PC using scp. You can also backup the remaining partititons. Copy
backups to a safe place, they are required for the next steps and stock
firmware recovery.
3. Reboot to OpenWrt initramfs:
```
reboot
```
4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin,
ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from
/tp_data backup) to the /tmp folder of the router using scp.
5. Prepare UBI:
```
ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3
ubimkvol /dev/ubi0 -N fip -t static -s 1MiB
ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip
ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000
ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000
```
6. Install kmod-mtd-rw and unlock partitions:
```
opkg update && opkg install kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock boot
mtd unlock bl2
mtd unlock factory
```
7. Prepare "factory" partition:
```
dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin
dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc
dd if=/tmp/default-mac >> /tmp/factory.bin
```
8. Write "factory" partition:
```
mtd erase factory
mtd write /tmp/factory.bin factory
```
9. Write preloader partition:
```
mtd erase bl2
mtd write /tmp/ubi-preloader.bin bl2
```
10. Write OpenWrt sysupgrade image:
```
sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb
```
Recovery
--------
1. Place OpenWrt initramfs-recovery.itb image (with original name) on the
tftp server (IP: 192.168.1.254).
2. Press "reset" button and power on the router. After ~10 sec release the
button.
3. Use OpenWrt initramfs system for recovery.
BL2 and FIP recovery
--------------------
Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed:
Link: https://github.com/981213/mtk_uartboot
Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial
Return to stock:
----------------
1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router
using scp.
2. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```
3. Restore stock U-Boot:
```
insmod mtd-rw i_want_a_brick=1
mtd unlock boot
mtd erase boot
mtd write /tmp/boot.bin boot
```
4. Erase UBI and reboot:
```
mtd erase ubi
reboot
```
5. Open U-Boot web recovery, upload stock firmware image and start
upgrade.
Link: http://192.168.1.1
6. Complete steps 1-9 of the OpenWrt installation guide to get root
rights.
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation
7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of
the router using scp.
8. Restore stock calibrations:
```
mtd write /tmp/tp_data.bin tp_data
reboot
```
9. Perform "factory restore" via stock firmware web interface.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16744
(cherry picked from commit ee8df790ca)
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17129
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
45 lines
701 B
Plaintext
45 lines
701 B
Plaintext
// SPDX-License-Identifier: (GL-2.0 OR MIT)
|
|
|
|
#include "mt7986b-mercusys-mr90x-v1-common.dtsi"
|
|
|
|
/ {
|
|
compatible = "mercusys,mr90x-v1", "mediatek,mt7986b";
|
|
model = "MERCUSYS MR90X v1";
|
|
};
|
|
|
|
&partitions {
|
|
partition@0 {
|
|
label = "boot";
|
|
reg = <0x0 0x200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "u-boot-env";
|
|
reg = <0x200000 0x100000>;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "ubi0";
|
|
reg = <0x300000 0x3200000>;
|
|
};
|
|
|
|
partition@3500000 {
|
|
label = "ubi1";
|
|
reg = <0x3500000 0x3200000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6700000 {
|
|
label = "userconfig";
|
|
reg = <0x6700000 0x800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6f00000 {
|
|
label = "tp_data";
|
|
reg = <0x6f00000 0x400000>;
|
|
read-only;
|
|
};
|
|
};
|