openwrt/target/linux/ath79/dts/ar9344_mikrotik_routerboard-16m-nor.dtsi
Jakob Riepler e0683839b8 ath79: add support for Mikrotik LHG 5
The MikroTik LHG 5 series (product codes RBLHG-5nD, RBLHG-5HPnD and
RBLHG-5HPnD-XL) devices are an outdoor 5GHz CPE with a 24.5dBi or 27dBi
integrated antenna built around the Atheros AR9344 SoC.
It is very similar to the SXT Lite5 series which this patch is based
upon.

Specifications:
 - SoC: Atheros AR9344
 - RAM: 64 MB
 - Storage: 16 MB SPI NOR
 - Wireless: Atheros AR9340 (SoC) 802.11a/n 2x2:2
 - Ethernet: Atheros AR8229 switch (SoC), 1x 10/100 port,
    8-32 Vdc PoE in
 - 8 user-controllable LEDs:
  - 1x power (blue)
  - 1x user (white)
  - 1x ethernet (green)
  - 5x rssi (green)

 See https://mikrotik.com/product/RBLHG-5nD for more details.

Notes:
 The device was already supported in the ar71xx target.

Flashing:
 TFTP boot initramfs image and then perform a sysupgrade. Follow common
 MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.

Signed-off-by: Jakob Riepler <jakob+openwrt@chaosfield.at>
2022-02-07 00:03:27 +01:00

66 lines
1017 B
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "RouterBoot";
reg = <0x0 0x20000>;
read-only;
compatible = "mikrotik,routerboot-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader1";
reg = <0x0 0x0>;
read-only;
};
hard_config: hard_config {
read-only;
};
bios {
size = <0x1000>;
read-only;
};
partition@10000 {
label = "bootloader2";
reg = <0x10000 0x0>;
read-only;
};
soft_config {
label = "soft_config";
};
};
partition@20000 {
compatible = "mikrotik,minor";
label = "firmware";
reg = <0x020000 0xfe0000>;
};
};
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};