mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
57 lines
1.8 KiB
Diff
57 lines
1.8 KiB
Diff
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
|
|
Date: Fri, 3 Jul 2015 11:45:42 +0530
|
|
Subject: [PATCH] ath10k: Delay device access after cold reset
|
|
|
|
It is observed that during cold reset pcie access right
|
|
after a write operation to SOC_GLOBAL_RESET_ADDRESS causes
|
|
Data Bus Error and system hard lockup. The reason
|
|
for bus error is that pcie needs some time to get
|
|
back to stable state for any transaction during cold reset. Add
|
|
delay of 20 msecs after write of SOC_GLOBAL_RESET_ADDRESS
|
|
to fix this issue.
|
|
|
|
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
|
|
---
|
|
|
|
--- a/drivers/net/wireless/ath/ath10k/pci.c
|
|
+++ b/drivers/net/wireless/ath/ath10k/pci.c
|
|
@@ -2761,7 +2761,6 @@ static int ath10k_pci_wait_for_target_in
|
|
|
|
static int ath10k_pci_cold_reset(struct ath10k *ar)
|
|
{
|
|
- int i;
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n");
|
|
@@ -2777,23 +2776,18 @@ static int ath10k_pci_cold_reset(struct
|
|
val |= 1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
|
|
- if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
|
|
- RTC_STATE_COLD_RESET_MASK)
|
|
- break;
|
|
- msleep(1);
|
|
- }
|
|
+ /* After writing into SOC_GLOBAL_RESET to put device into
|
|
+ * reset and pulling out of reset pcie may not be stable
|
|
+ * for any immediate pcie register access and cause bus error,
|
|
+ * add delay before any pcie access request to fix this issue.
|
|
+ */
|
|
+ msleep(20);
|
|
|
|
/* Pull Target, including PCIe, out of RESET. */
|
|
val &= ~1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
- for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) {
|
|
- if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) &
|
|
- RTC_STATE_COLD_RESET_MASK))
|
|
- break;
|
|
- msleep(1);
|
|
- }
|
|
+ msleep(20);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n");
|
|
|