openwrt/target/linux/brcm63xx/patches-3.10/535-board_rta770w.patch
Jonas Gorski 439fe41813 brcm63xx: CPVA502+ board fixes
Some fixes for Telsey CPVA502+ bcm6348 routers:
- reset the external PHY (eth1) with proper platform code, not using a led definiton
- eth1 is an external phy, not a switch, deleted forced link speed
- fixed led color

Patch made for 3.14 kernel patches.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: also fix 3.14, refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41420
2014-06-30 13:34:28 +00:00

72 lines
1.4 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -776,6 +776,60 @@ static struct board_info __initdata boar
},
},
};
+
+// Actually this board is the very same as the rta770bw,
+// where the additional 'b' within the name just
+// just indicates 'Annex B'. The ADSL Modem itself is able
+// to handle both Annex A as well as Annex B -
+// the loaded firmware makes the only difference
+static struct board_info __initdata board_rta770w = {
+ .name = "RTA770W",
+ .expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
+
+ .has_enet0 = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "RTA770W:green:usb",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:adsl",
+ .gpio = 8,
+ },
+ {
+ .name = "RTA770W:green:diag",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "RTA770W:green:wlan",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 13,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .active_low = 1,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif
/*
@@ -3784,6 +3838,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6345
&board_96345gw2,
&board_rta770bw,
+ &board_rta770w,
#endif
#ifdef CONFIG_BCM63XX_CPU_6348
&board_96348r,