mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
da98603597
This PR is a blend of several kernel bumps authored by ldir taken from his staging tree w/ some further adjustments made by me and update_kernel.sh Summary: Deleted upstreamed patches: generic: 742-v5.5-net-sfp-add-support-for-module-quirks.patch 743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch bcm63xx: 022-v5.8-mtd-rawnand-brcmnand-correctly-verify-erased-pages.patch 024-v5.8-mtd-rawnand-brcmnand-fix-CS0-layout.patch mediatek: 0402-net-ethernet-mtk_eth_soc-Always-call-mtk_gmac0_rgmii.patch Deleted patches applied differently upstream: generic: 641-sch_cake-fix-IP-protocol-handling-in-the-presence-of.patch Manually merged patches: generic: 395-v5.8-net-sch_cake-Take-advantage-of-skb-hash-where-appropriate.patch bcm27xx: 950-0132-lan78xx-Debounce-link-events-to-minimize-poll-storm.patch layerscape: 701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ath79/generic, bcm27xx/bcm2708, bcm27xx/bcm2711, imx6, mvebu/cortexa9, sunxi/a53 Run-tested: Netgear R7800 (ipq806x) No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-By: Lucian Cristian <Lucian.cristian@gmail.com> [mvebu] Tested-By: Curtis Deptuck <curtdept@me.com> [x86/64] [do not remove 395-v5.8-net-sch_cake-Take-advantage-... patch, adjust and refresh patches, adjust commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-By: John Audia <graysky@archlinux.us> [ipq806x]
1651 lines
45 KiB
Diff
1651 lines
45 KiB
Diff
From 36366e367ee93ced84fddb8fae6675e12985f5a4 Mon Sep 17 00:00:00 2001
|
|
From: Paul Burton <paulburton@kernel.org>
|
|
Date: Thu, 5 Dec 2019 10:23:18 -0800
|
|
Subject: [PATCH] MIPS: BPF: Restore MIPS32 cBPF JIT
|
|
|
|
Commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32
|
|
architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has
|
|
previously only been availailable for MIPS64. It was my understanding at
|
|
the time that the BPF test suite was passing & JITing a comparable
|
|
number of tests to our cBPF JIT [1], but it turns out that was not the
|
|
case.
|
|
|
|
The eBPF JIT has a number of problems on MIPS32:
|
|
|
|
- Most notably various code paths still result in emission of MIPS64
|
|
instructions which will cause reserved instruction exceptions & kernel
|
|
panics when run on MIPS32 CPUs.
|
|
|
|
- The eBPF JIT doesn't account for differences between the O32 ABI used
|
|
by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably
|
|
arguments beyond the first 4 are passed on the stack in O32, and this
|
|
is entirely unhandled when JITing a BPF_CALL instruction. Stack space
|
|
must be reserved for arguments even if they all fit in registers, and
|
|
the callee is free to assume that stack space has been reserved for
|
|
its use - with the eBPF JIT this is not the case, so calling any
|
|
function can result in clobbering values on the stack & unpredictable
|
|
behaviour. Function arguments in eBPF are always 64-bit values which
|
|
is also entirely unhandled - the JIT still uses a single (32-bit)
|
|
register per argument. As a result all function arguments are always
|
|
passed incorrectly when JITing a BPF_CALL instruction, leading to
|
|
kernel crashes or strange behavior.
|
|
|
|
- The JIT attempts to bail our on use of ALU64 instructions or 64-bit
|
|
memory access instructions. The code doing this at the start of
|
|
build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW,
|
|
when it should really be checking BPF_SIZE() & only doing so when
|
|
BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false
|
|
positives that cause more bailouts than intended, and that in turns
|
|
hides some of the problems described above.
|
|
|
|
- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF
|
|
instructions that the MIPS32 eBPF JIT bails out on, leading to most
|
|
cBPF programs not being JITed at all.
|
|
|
|
Until these problems are resolved, revert the removal of the cBPF JIT
|
|
performed by commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for
|
|
MIPS32 architecture."). Together with commit f8fffebdea75 ("MIPS: BPF:
|
|
Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to
|
|
the same state it was prior to the introduction of the broken eBPF JIT
|
|
support.
|
|
|
|
[1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/
|
|
|
|
Signed-off-by: Paul Burton <paulburton@kernel.org>
|
|
Fixes: 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
|
|
Cc: Daniel Borkmann <daniel@iogearbox.net>
|
|
Cc: Hassan Naveed <hnaveed@wavecomp.com>
|
|
Cc: Tony Ambardar <itugrok@yahoo.com>
|
|
Cc: bpf@vger.kernel.org
|
|
Cc: netdev@vger.kernel.org
|
|
Cc: linux-mips@vger.kernel.org
|
|
Cc: linux-kernel@vger.kernel.org
|
|
---
|
|
arch/mips/Kconfig | 1 +
|
|
arch/mips/net/Makefile | 1 +
|
|
arch/mips/net/bpf_jit.c | 1270 +++++++++++++++++++++++++++++++++++
|
|
arch/mips/net/bpf_jit_asm.S | 285 ++++++++
|
|
4 files changed, 1557 insertions(+)
|
|
create mode 100644 arch/mips/net/bpf_jit.c
|
|
create mode 100644 arch/mips/net/bpf_jit_asm.S
|
|
|
|
--- a/arch/mips/Kconfig
|
|
+++ b/arch/mips/Kconfig
|
|
@@ -46,6 +46,7 @@ config MIPS
|
|
select HAVE_ARCH_TRACEHOOK
|
|
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
|
|
select HAVE_ASM_MODVERSIONS
|
|
+ select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
|
|
select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
|
|
select HAVE_CONTEXT_TRACKING
|
|
select HAVE_COPY_THREAD_TLS
|
|
--- a/arch/mips/net/Makefile
|
|
+++ b/arch/mips/net/Makefile
|
|
@@ -1,4 +1,5 @@
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
|
# MIPS networking code
|
|
|
|
+obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
|
|
obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
|
|
--- /dev/null
|
|
+++ b/arch/mips/net/bpf_jit.c
|
|
@@ -0,0 +1,1270 @@
|
|
+/*
|
|
+ * Just-In-Time compiler for BPF filters on MIPS
|
|
+ *
|
|
+ * Copyright (c) 2014 Imagination Technologies Ltd.
|
|
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; version 2 of the License.
|
|
+ */
|
|
+
|
|
+#include <linux/bitops.h>
|
|
+#include <linux/compiler.h>
|
|
+#include <linux/errno.h>
|
|
+#include <linux/filter.h>
|
|
+#include <linux/if_vlan.h>
|
|
+#include <linux/moduleloader.h>
|
|
+#include <linux/netdevice.h>
|
|
+#include <linux/string.h>
|
|
+#include <linux/slab.h>
|
|
+#include <linux/types.h>
|
|
+#include <asm/asm.h>
|
|
+#include <asm/bitops.h>
|
|
+#include <asm/cacheflush.h>
|
|
+#include <asm/cpu-features.h>
|
|
+#include <asm/uasm.h>
|
|
+
|
|
+#include "bpf_jit.h"
|
|
+
|
|
+/* ABI
|
|
+ * r_skb_hl SKB header length
|
|
+ * r_data SKB data pointer
|
|
+ * r_off Offset
|
|
+ * r_A BPF register A
|
|
+ * r_X BPF register X
|
|
+ * r_skb *skb
|
|
+ * r_M *scratch memory
|
|
+ * r_skb_len SKB length
|
|
+ *
|
|
+ * On entry (*bpf_func)(*skb, *filter)
|
|
+ * a0 = MIPS_R_A0 = skb;
|
|
+ * a1 = MIPS_R_A1 = filter;
|
|
+ *
|
|
+ * Stack
|
|
+ * ...
|
|
+ * M[15]
|
|
+ * M[14]
|
|
+ * M[13]
|
|
+ * ...
|
|
+ * M[0] <-- r_M
|
|
+ * saved reg k-1
|
|
+ * saved reg k-2
|
|
+ * ...
|
|
+ * saved reg 0 <-- r_sp
|
|
+ * <no argument area>
|
|
+ *
|
|
+ * Packet layout
|
|
+ *
|
|
+ * <--------------------- len ------------------------>
|
|
+ * <--skb-len(r_skb_hl)-->< ----- skb->data_len ------>
|
|
+ * ----------------------------------------------------
|
|
+ * | skb->data |
|
|
+ * ----------------------------------------------------
|
|
+ */
|
|
+
|
|
+#define ptr typeof(unsigned long)
|
|
+
|
|
+#define SCRATCH_OFF(k) (4 * (k))
|
|
+
|
|
+/* JIT flags */
|
|
+#define SEEN_CALL (1 << BPF_MEMWORDS)
|
|
+#define SEEN_SREG_SFT (BPF_MEMWORDS + 1)
|
|
+#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT)
|
|
+#define SEEN_SREG(x) (SEEN_SREG_BASE << (x))
|
|
+#define SEEN_OFF SEEN_SREG(2)
|
|
+#define SEEN_A SEEN_SREG(3)
|
|
+#define SEEN_X SEEN_SREG(4)
|
|
+#define SEEN_SKB SEEN_SREG(5)
|
|
+#define SEEN_MEM SEEN_SREG(6)
|
|
+/* SEEN_SK_DATA also implies skb_hl an skb_len */
|
|
+#define SEEN_SKB_DATA (SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0))
|
|
+
|
|
+/* Arguments used by JIT */
|
|
+#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */
|
|
+
|
|
+#define SBIT(x) (1 << (x)) /* Signed version of BIT() */
|
|
+
|
|
+/**
|
|
+ * struct jit_ctx - JIT context
|
|
+ * @skf: The sk_filter
|
|
+ * @prologue_bytes: Number of bytes for prologue
|
|
+ * @idx: Instruction index
|
|
+ * @flags: JIT flags
|
|
+ * @offsets: Instruction offsets
|
|
+ * @target: Memory location for the compiled filter
|
|
+ */
|
|
+struct jit_ctx {
|
|
+ const struct bpf_prog *skf;
|
|
+ unsigned int prologue_bytes;
|
|
+ u32 idx;
|
|
+ u32 flags;
|
|
+ u32 *offsets;
|
|
+ u32 *target;
|
|
+};
|
|
+
|
|
+
|
|
+static inline int optimize_div(u32 *k)
|
|
+{
|
|
+ /* power of 2 divides can be implemented with right shift */
|
|
+ if (!(*k & (*k-1))) {
|
|
+ *k = ilog2(*k);
|
|
+ return 1;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx);
|
|
+
|
|
+/* Simply emit the instruction if the JIT memory space has been allocated */
|
|
+#define emit_instr(ctx, func, ...) \
|
|
+do { \
|
|
+ if ((ctx)->target != NULL) { \
|
|
+ u32 *p = &(ctx)->target[ctx->idx]; \
|
|
+ uasm_i_##func(&p, ##__VA_ARGS__); \
|
|
+ } \
|
|
+ (ctx)->idx++; \
|
|
+} while (0)
|
|
+
|
|
+/*
|
|
+ * Similar to emit_instr but it must be used when we need to emit
|
|
+ * 32-bit or 64-bit instructions
|
|
+ */
|
|
+#define emit_long_instr(ctx, func, ...) \
|
|
+do { \
|
|
+ if ((ctx)->target != NULL) { \
|
|
+ u32 *p = &(ctx)->target[ctx->idx]; \
|
|
+ UASM_i_##func(&p, ##__VA_ARGS__); \
|
|
+ } \
|
|
+ (ctx)->idx++; \
|
|
+} while (0)
|
|
+
|
|
+/* Determine if immediate is within the 16-bit signed range */
|
|
+static inline bool is_range16(s32 imm)
|
|
+{
|
|
+ return !(imm >= SBIT(15) || imm < -SBIT(15));
|
|
+}
|
|
+
|
|
+static inline void emit_addu(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, addu, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_nop(struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, nop);
|
|
+}
|
|
+
|
|
+/* Load a u32 immediate to a register */
|
|
+static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ if (ctx->target != NULL) {
|
|
+ /* addiu can only handle s16 */
|
|
+ if (!is_range16(imm)) {
|
|
+ u32 *p = &ctx->target[ctx->idx];
|
|
+ uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16);
|
|
+ p = &ctx->target[ctx->idx + 1];
|
|
+ uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff);
|
|
+ } else {
|
|
+ u32 *p = &ctx->target[ctx->idx];
|
|
+ uasm_i_addiu(&p, dst, r_zero, imm);
|
|
+ }
|
|
+ }
|
|
+ ctx->idx++;
|
|
+
|
|
+ if (!is_range16(imm))
|
|
+ ctx->idx++;
|
|
+}
|
|
+
|
|
+static inline void emit_or(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, or, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_ori(unsigned int dst, unsigned src, u32 imm,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ if (imm >= BIT(16)) {
|
|
+ emit_load_imm(r_tmp, imm, ctx);
|
|
+ emit_or(dst, src, r_tmp, ctx);
|
|
+ } else {
|
|
+ emit_instr(ctx, ori, dst, src, imm);
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void emit_daddiu(unsigned int dst, unsigned int src,
|
|
+ int imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ /*
|
|
+ * Only used for stack, so the imm is relatively small
|
|
+ * and it fits in 15-bits
|
|
+ */
|
|
+ emit_instr(ctx, daddiu, dst, src, imm);
|
|
+}
|
|
+
|
|
+static inline void emit_addiu(unsigned int dst, unsigned int src,
|
|
+ u32 imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ if (!is_range16(imm)) {
|
|
+ emit_load_imm(r_tmp, imm, ctx);
|
|
+ emit_addu(dst, r_tmp, src, ctx);
|
|
+ } else {
|
|
+ emit_instr(ctx, addiu, dst, src, imm);
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void emit_and(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, and, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_andi(unsigned int dst, unsigned int src,
|
|
+ u32 imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* If imm does not fit in u16 then load it to register */
|
|
+ if (imm >= BIT(16)) {
|
|
+ emit_load_imm(r_tmp, imm, ctx);
|
|
+ emit_and(dst, src, r_tmp, ctx);
|
|
+ } else {
|
|
+ emit_instr(ctx, andi, dst, src, imm);
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void emit_xor(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, xor, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* If imm does not fit in u16 then load it to register */
|
|
+ if (imm >= BIT(16)) {
|
|
+ emit_load_imm(r_tmp, imm, ctx);
|
|
+ emit_xor(dst, src, r_tmp, ctx);
|
|
+ } else {
|
|
+ emit_instr(ctx, xori, dst, src, imm);
|
|
+ }
|
|
+}
|
|
+
|
|
+static inline void emit_stack_offset(int offset, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset);
|
|
+}
|
|
+
|
|
+static inline void emit_subu(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, subu, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_subu(reg, r_zero, reg, ctx);
|
|
+}
|
|
+
|
|
+static inline void emit_sllv(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, sllv, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_sll(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* sa is 5-bits long */
|
|
+ if (sa >= BIT(5))
|
|
+ /* Shifting >= 32 results in zero */
|
|
+ emit_jit_reg_move(dst, r_zero, ctx);
|
|
+ else
|
|
+ emit_instr(ctx, sll, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_srlv(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, srlv, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_srl(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* sa is 5-bits long */
|
|
+ if (sa >= BIT(5))
|
|
+ /* Shifting >= 32 results in zero */
|
|
+ emit_jit_reg_move(dst, r_zero, ctx);
|
|
+ else
|
|
+ emit_instr(ctx, srl, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_slt(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, slt, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_sltu(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, sltu, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_sltiu(unsigned dst, unsigned int src,
|
|
+ unsigned int imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* 16 bit immediate */
|
|
+ if (!is_range16((s32)imm)) {
|
|
+ emit_load_imm(r_tmp, imm, ctx);
|
|
+ emit_sltu(dst, src, r_tmp, ctx);
|
|
+ } else {
|
|
+ emit_instr(ctx, sltiu, dst, src, imm);
|
|
+ }
|
|
+
|
|
+}
|
|
+
|
|
+/* Store register on the stack */
|
|
+static inline void emit_store_stack_reg(ptr reg, ptr base,
|
|
+ unsigned int offset,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_long_instr(ctx, SW, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_store(ptr reg, ptr base, unsigned int offset,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, sw, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_load_stack_reg(ptr reg, ptr base,
|
|
+ unsigned int offset,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_long_instr(ctx, LW, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_load(unsigned int reg, unsigned int base,
|
|
+ unsigned int offset, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, lw, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_load_byte(unsigned int reg, unsigned int base,
|
|
+ unsigned int offset, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, lb, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_half_load(unsigned int reg, unsigned int base,
|
|
+ unsigned int offset, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, lh, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_half_load_unsigned(unsigned int reg, unsigned int base,
|
|
+ unsigned int offset, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, lhu, reg, offset, base);
|
|
+}
|
|
+
|
|
+static inline void emit_mul(unsigned int dst, unsigned int src1,
|
|
+ unsigned int src2, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, mul, dst, src1, src2);
|
|
+}
|
|
+
|
|
+static inline void emit_div(unsigned int dst, unsigned int src,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ if (ctx->target != NULL) {
|
|
+ u32 *p = &ctx->target[ctx->idx];
|
|
+ uasm_i_divu(&p, dst, src);
|
|
+ p = &ctx->target[ctx->idx + 1];
|
|
+ uasm_i_mflo(&p, dst);
|
|
+ }
|
|
+ ctx->idx += 2; /* 2 insts */
|
|
+}
|
|
+
|
|
+static inline void emit_mod(unsigned int dst, unsigned int src,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ if (ctx->target != NULL) {
|
|
+ u32 *p = &ctx->target[ctx->idx];
|
|
+ uasm_i_divu(&p, dst, src);
|
|
+ p = &ctx->target[ctx->idx + 1];
|
|
+ uasm_i_mfhi(&p, dst);
|
|
+ }
|
|
+ ctx->idx += 2; /* 2 insts */
|
|
+}
|
|
+
|
|
+static inline void emit_dsll(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, dsll, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_dsrl32(unsigned int dst, unsigned int src,
|
|
+ unsigned int sa, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, dsrl32, dst, src, sa);
|
|
+}
|
|
+
|
|
+static inline void emit_wsbh(unsigned int dst, unsigned int src,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, wsbh, dst, src);
|
|
+}
|
|
+
|
|
+/* load pointer to register */
|
|
+static inline void emit_load_ptr(unsigned int dst, unsigned int src,
|
|
+ int imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ /* src contains the base addr of the 32/64-pointer */
|
|
+ emit_long_instr(ctx, LW, dst, imm, src);
|
|
+}
|
|
+
|
|
+/* load a function pointer to register */
|
|
+static inline void emit_load_func(unsigned int reg, ptr imm,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ if (IS_ENABLED(CONFIG_64BIT)) {
|
|
+ /* At this point imm is always 64-bit */
|
|
+ emit_load_imm(r_tmp, (u64)imm >> 32, ctx);
|
|
+ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
|
|
+ emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx);
|
|
+ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
|
|
+ emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx);
|
|
+ } else {
|
|
+ emit_load_imm(reg, imm, ctx);
|
|
+ }
|
|
+}
|
|
+
|
|
+/* Move to real MIPS register */
|
|
+static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_long_instr(ctx, ADDU, dst, src, r_zero);
|
|
+}
|
|
+
|
|
+/* Move to JIT (32-bit) register */
|
|
+static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_addu(dst, src, r_zero, ctx);
|
|
+}
|
|
+
|
|
+/* Compute the immediate value for PC-relative branches. */
|
|
+static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
|
|
+{
|
|
+ if (ctx->target == NULL)
|
|
+ return 0;
|
|
+
|
|
+ /*
|
|
+ * We want a pc-relative branch. We only do forward branches
|
|
+ * so tgt is always after pc. tgt is the instruction offset
|
|
+ * we want to jump to.
|
|
+
|
|
+ * Branch on MIPS:
|
|
+ * I: target_offset <- sign_extend(offset)
|
|
+ * I+1: PC += target_offset (delay slot)
|
|
+ *
|
|
+ * ctx->idx currently points to the branch instruction
|
|
+ * but the offset is added to the delay slot so we need
|
|
+ * to subtract 4.
|
|
+ */
|
|
+ return ctx->offsets[tgt] -
|
|
+ (ctx->idx * 4 - ctx->prologue_bytes) - 4;
|
|
+}
|
|
+
|
|
+static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2,
|
|
+ unsigned int imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ if (ctx->target != NULL) {
|
|
+ u32 *p = &ctx->target[ctx->idx];
|
|
+
|
|
+ switch (cond) {
|
|
+ case MIPS_COND_EQ:
|
|
+ uasm_i_beq(&p, reg1, reg2, imm);
|
|
+ break;
|
|
+ case MIPS_COND_NE:
|
|
+ uasm_i_bne(&p, reg1, reg2, imm);
|
|
+ break;
|
|
+ case MIPS_COND_ALL:
|
|
+ uasm_i_b(&p, imm);
|
|
+ break;
|
|
+ default:
|
|
+ pr_warn("%s: Unhandled branch conditional: %d\n",
|
|
+ __func__, cond);
|
|
+ }
|
|
+ }
|
|
+ ctx->idx++;
|
|
+}
|
|
+
|
|
+static inline void emit_b(unsigned int imm, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx);
|
|
+}
|
|
+
|
|
+static inline void emit_jalr(unsigned int link, unsigned int reg,
|
|
+ struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, jalr, link, reg);
|
|
+}
|
|
+
|
|
+static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx)
|
|
+{
|
|
+ emit_instr(ctx, jr, reg);
|
|
+}
|
|
+
|
|
+static inline u16 align_sp(unsigned int num)
|
|
+{
|
|
+ /* Double word alignment for 32-bit, quadword for 64-bit */
|
|
+ unsigned int align = IS_ENABLED(CONFIG_64BIT) ? 16 : 8;
|
|
+ num = (num + (align - 1)) & -align;
|
|
+ return num;
|
|
+}
|
|
+
|
|
+static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
|
|
+{
|
|
+ int i = 0, real_off = 0;
|
|
+ u32 sflags, tmp_flags;
|
|
+
|
|
+ /* Adjust the stack pointer */
|
|
+ if (offset)
|
|
+ emit_stack_offset(-align_sp(offset), ctx);
|
|
+
|
|
+ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
|
|
+ /* sflags is essentially a bitmap */
|
|
+ while (tmp_flags) {
|
|
+ if ((sflags >> i) & 0x1) {
|
|
+ emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
|
|
+ ctx);
|
|
+ real_off += SZREG;
|
|
+ }
|
|
+ i++;
|
|
+ tmp_flags >>= 1;
|
|
+ }
|
|
+
|
|
+ /* save return address */
|
|
+ if (ctx->flags & SEEN_CALL) {
|
|
+ emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
|
|
+ real_off += SZREG;
|
|
+ }
|
|
+
|
|
+ /* Setup r_M leaving the alignment gap if necessary */
|
|
+ if (ctx->flags & SEEN_MEM) {
|
|
+ if (real_off % (SZREG * 2))
|
|
+ real_off += SZREG;
|
|
+ emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void restore_bpf_jit_regs(struct jit_ctx *ctx,
|
|
+ unsigned int offset)
|
|
+{
|
|
+ int i, real_off = 0;
|
|
+ u32 sflags, tmp_flags;
|
|
+
|
|
+ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
|
|
+ /* sflags is a bitmap */
|
|
+ i = 0;
|
|
+ while (tmp_flags) {
|
|
+ if ((sflags >> i) & 0x1) {
|
|
+ emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
|
|
+ ctx);
|
|
+ real_off += SZREG;
|
|
+ }
|
|
+ i++;
|
|
+ tmp_flags >>= 1;
|
|
+ }
|
|
+
|
|
+ /* restore return address */
|
|
+ if (ctx->flags & SEEN_CALL)
|
|
+ emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
|
|
+
|
|
+ /* Restore the sp and discard the scrach memory */
|
|
+ if (offset)
|
|
+ emit_stack_offset(align_sp(offset), ctx);
|
|
+}
|
|
+
|
|
+static unsigned int get_stack_depth(struct jit_ctx *ctx)
|
|
+{
|
|
+ int sp_off = 0;
|
|
+
|
|
+
|
|
+ /* How may s* regs do we need to preserved? */
|
|
+ sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG;
|
|
+
|
|
+ if (ctx->flags & SEEN_MEM)
|
|
+ sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
|
|
+
|
|
+ if (ctx->flags & SEEN_CALL)
|
|
+ sp_off += SZREG; /* Space for our ra register */
|
|
+
|
|
+ return sp_off;
|
|
+}
|
|
+
|
|
+static void build_prologue(struct jit_ctx *ctx)
|
|
+{
|
|
+ int sp_off;
|
|
+
|
|
+ /* Calculate the total offset for the stack pointer */
|
|
+ sp_off = get_stack_depth(ctx);
|
|
+ save_bpf_jit_regs(ctx, sp_off);
|
|
+
|
|
+ if (ctx->flags & SEEN_SKB)
|
|
+ emit_reg_move(r_skb, MIPS_R_A0, ctx);
|
|
+
|
|
+ if (ctx->flags & SEEN_SKB_DATA) {
|
|
+ /* Load packet length */
|
|
+ emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len),
|
|
+ ctx);
|
|
+ emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len),
|
|
+ ctx);
|
|
+ /* Load the data pointer */
|
|
+ emit_load_ptr(r_skb_data, r_skb,
|
|
+ offsetof(struct sk_buff, data), ctx);
|
|
+ /* Load the header length */
|
|
+ emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx);
|
|
+ }
|
|
+
|
|
+ if (ctx->flags & SEEN_X)
|
|
+ emit_jit_reg_move(r_X, r_zero, ctx);
|
|
+
|
|
+ /*
|
|
+ * Do not leak kernel data to userspace, we only need to clear
|
|
+ * r_A if it is ever used. In fact if it is never used, we
|
|
+ * will not save/restore it, so clearing it in this case would
|
|
+ * corrupt the state of the caller.
|
|
+ */
|
|
+ if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
|
|
+ (ctx->flags & SEEN_A))
|
|
+ emit_jit_reg_move(r_A, r_zero, ctx);
|
|
+}
|
|
+
|
|
+static void build_epilogue(struct jit_ctx *ctx)
|
|
+{
|
|
+ unsigned int sp_off;
|
|
+
|
|
+ /* Calculate the total offset for the stack pointer */
|
|
+
|
|
+ sp_off = get_stack_depth(ctx);
|
|
+ restore_bpf_jit_regs(ctx, sp_off);
|
|
+
|
|
+ /* Return */
|
|
+ emit_jr(r_ra, ctx);
|
|
+ emit_nop(ctx);
|
|
+}
|
|
+
|
|
+#define CHOOSE_LOAD_FUNC(K, func) \
|
|
+ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
|
|
+ func##_positive)
|
|
+
|
|
+static int build_body(struct jit_ctx *ctx)
|
|
+{
|
|
+ const struct bpf_prog *prog = ctx->skf;
|
|
+ const struct sock_filter *inst;
|
|
+ unsigned int i, off, condt;
|
|
+ u32 k, b_off __maybe_unused;
|
|
+ u8 (*sk_load_func)(unsigned long *skb, int offset);
|
|
+
|
|
+ for (i = 0; i < prog->len; i++) {
|
|
+ u16 code;
|
|
+
|
|
+ inst = &(prog->insns[i]);
|
|
+ pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n",
|
|
+ __func__, inst->code, inst->jt, inst->jf, inst->k);
|
|
+ k = inst->k;
|
|
+ code = bpf_anc_helper(inst);
|
|
+
|
|
+ if (ctx->target == NULL)
|
|
+ ctx->offsets[i] = ctx->idx * 4;
|
|
+
|
|
+ switch (code) {
|
|
+ case BPF_LD | BPF_IMM:
|
|
+ /* A <- k ==> li r_A, k */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_load_imm(r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_LD | BPF_W | BPF_LEN:
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
|
|
+ /* A <- len ==> lw r_A, offset(skb) */
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ off = offsetof(struct sk_buff, len);
|
|
+ emit_load(r_A, r_skb, off, ctx);
|
|
+ break;
|
|
+ case BPF_LD | BPF_MEM:
|
|
+ /* A <- M[k] ==> lw r_A, offset(M) */
|
|
+ ctx->flags |= SEEN_MEM | SEEN_A;
|
|
+ emit_load(r_A, r_M, SCRATCH_OFF(k), ctx);
|
|
+ break;
|
|
+ case BPF_LD | BPF_W | BPF_ABS:
|
|
+ /* A <- P[k:4] */
|
|
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word);
|
|
+ goto load;
|
|
+ case BPF_LD | BPF_H | BPF_ABS:
|
|
+ /* A <- P[k:2] */
|
|
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half);
|
|
+ goto load;
|
|
+ case BPF_LD | BPF_B | BPF_ABS:
|
|
+ /* A <- P[k:1] */
|
|
+ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte);
|
|
+load:
|
|
+ emit_load_imm(r_off, k, ctx);
|
|
+load_common:
|
|
+ ctx->flags |= SEEN_CALL | SEEN_OFF |
|
|
+ SEEN_SKB | SEEN_A | SEEN_SKB_DATA;
|
|
+
|
|
+ emit_load_func(r_s0, (ptr)sk_load_func, ctx);
|
|
+ emit_reg_move(MIPS_R_A0, r_skb, ctx);
|
|
+ emit_jalr(MIPS_R_RA, r_s0, ctx);
|
|
+ /* Load second argument to delay slot */
|
|
+ emit_reg_move(MIPS_R_A1, r_off, ctx);
|
|
+ /* Check the error value */
|
|
+ emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx),
|
|
+ ctx);
|
|
+ /* Load return register on DS for failures */
|
|
+ emit_reg_move(r_ret, r_zero, ctx);
|
|
+ /* Return with error */
|
|
+ emit_b(b_imm(prog->len, ctx), ctx);
|
|
+ emit_nop(ctx);
|
|
+ break;
|
|
+ case BPF_LD | BPF_W | BPF_IND:
|
|
+ /* A <- P[X + k:4] */
|
|
+ sk_load_func = sk_load_word;
|
|
+ goto load_ind;
|
|
+ case BPF_LD | BPF_H | BPF_IND:
|
|
+ /* A <- P[X + k:2] */
|
|
+ sk_load_func = sk_load_half;
|
|
+ goto load_ind;
|
|
+ case BPF_LD | BPF_B | BPF_IND:
|
|
+ /* A <- P[X + k:1] */
|
|
+ sk_load_func = sk_load_byte;
|
|
+load_ind:
|
|
+ ctx->flags |= SEEN_OFF | SEEN_X;
|
|
+ emit_addiu(r_off, r_X, k, ctx);
|
|
+ goto load_common;
|
|
+ case BPF_LDX | BPF_IMM:
|
|
+ /* X <- k */
|
|
+ ctx->flags |= SEEN_X;
|
|
+ emit_load_imm(r_X, k, ctx);
|
|
+ break;
|
|
+ case BPF_LDX | BPF_MEM:
|
|
+ /* X <- M[k] */
|
|
+ ctx->flags |= SEEN_X | SEEN_MEM;
|
|
+ emit_load(r_X, r_M, SCRATCH_OFF(k), ctx);
|
|
+ break;
|
|
+ case BPF_LDX | BPF_W | BPF_LEN:
|
|
+ /* X <- len */
|
|
+ ctx->flags |= SEEN_X | SEEN_SKB;
|
|
+ off = offsetof(struct sk_buff, len);
|
|
+ emit_load(r_X, r_skb, off, ctx);
|
|
+ break;
|
|
+ case BPF_LDX | BPF_B | BPF_MSH:
|
|
+ /* X <- 4 * (P[k:1] & 0xf) */
|
|
+ ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB;
|
|
+ /* Load offset to a1 */
|
|
+ emit_load_func(r_s0, (ptr)sk_load_byte, ctx);
|
|
+ /*
|
|
+ * This may emit two instructions so it may not fit
|
|
+ * in the delay slot. So use a0 in the delay slot.
|
|
+ */
|
|
+ emit_load_imm(MIPS_R_A1, k, ctx);
|
|
+ emit_jalr(MIPS_R_RA, r_s0, ctx);
|
|
+ emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
|
|
+ /* Check the error value */
|
|
+ emit_bcond(MIPS_COND_NE, r_ret, 0,
|
|
+ b_imm(prog->len, ctx), ctx);
|
|
+ emit_reg_move(r_ret, r_zero, ctx);
|
|
+ /* We are good */
|
|
+ /* X <- P[1:K] & 0xf */
|
|
+ emit_andi(r_X, r_A, 0xf, ctx);
|
|
+ /* X << 2 */
|
|
+ emit_b(b_imm(i + 1, ctx), ctx);
|
|
+ emit_sll(r_X, r_X, 2, ctx); /* delay slot */
|
|
+ break;
|
|
+ case BPF_ST:
|
|
+ /* M[k] <- A */
|
|
+ ctx->flags |= SEEN_MEM | SEEN_A;
|
|
+ emit_store(r_A, r_M, SCRATCH_OFF(k), ctx);
|
|
+ break;
|
|
+ case BPF_STX:
|
|
+ /* M[k] <- X */
|
|
+ ctx->flags |= SEEN_MEM | SEEN_X;
|
|
+ emit_store(r_X, r_M, SCRATCH_OFF(k), ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_ADD | BPF_K:
|
|
+ /* A += K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_addiu(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_ADD | BPF_X:
|
|
+ /* A += X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_addu(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_SUB | BPF_K:
|
|
+ /* A -= K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_addiu(r_A, r_A, -k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_SUB | BPF_X:
|
|
+ /* A -= X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_subu(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_MUL | BPF_K:
|
|
+ /* A *= K */
|
|
+ /* Load K to scratch register before MUL */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_load_imm(r_s0, k, ctx);
|
|
+ emit_mul(r_A, r_A, r_s0, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_MUL | BPF_X:
|
|
+ /* A *= X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_mul(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_DIV | BPF_K:
|
|
+ /* A /= k */
|
|
+ if (k == 1)
|
|
+ break;
|
|
+ if (optimize_div(&k)) {
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_srl(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ }
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_load_imm(r_s0, k, ctx);
|
|
+ emit_div(r_A, r_s0, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_MOD | BPF_K:
|
|
+ /* A %= k */
|
|
+ if (k == 1) {
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_jit_reg_move(r_A, r_zero, ctx);
|
|
+ } else {
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_load_imm(r_s0, k, ctx);
|
|
+ emit_mod(r_A, r_s0, ctx);
|
|
+ }
|
|
+ break;
|
|
+ case BPF_ALU | BPF_DIV | BPF_X:
|
|
+ /* A /= X */
|
|
+ ctx->flags |= SEEN_X | SEEN_A;
|
|
+ /* Check if r_X is zero */
|
|
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
|
|
+ b_imm(prog->len, ctx), ctx);
|
|
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
|
|
+ emit_div(r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_MOD | BPF_X:
|
|
+ /* A %= X */
|
|
+ ctx->flags |= SEEN_X | SEEN_A;
|
|
+ /* Check if r_X is zero */
|
|
+ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
|
|
+ b_imm(prog->len, ctx), ctx);
|
|
+ emit_load_imm(r_ret, 0, ctx); /* delay slot */
|
|
+ emit_mod(r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_OR | BPF_K:
|
|
+ /* A |= K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_ori(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_OR | BPF_X:
|
|
+ /* A |= X */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_ori(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_XOR | BPF_K:
|
|
+ /* A ^= k */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_xori(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_ALU_XOR_X:
|
|
+ case BPF_ALU | BPF_XOR | BPF_X:
|
|
+ /* A ^= X */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_xor(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_AND | BPF_K:
|
|
+ /* A &= K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_andi(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_AND | BPF_X:
|
|
+ /* A &= X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_and(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_LSH | BPF_K:
|
|
+ /* A <<= K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_sll(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_LSH | BPF_X:
|
|
+ /* A <<= X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_sllv(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_RSH | BPF_K:
|
|
+ /* A >>= K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_srl(r_A, r_A, k, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_RSH | BPF_X:
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_srlv(r_A, r_A, r_X, ctx);
|
|
+ break;
|
|
+ case BPF_ALU | BPF_NEG:
|
|
+ /* A = -A */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_neg(r_A, ctx);
|
|
+ break;
|
|
+ case BPF_JMP | BPF_JA:
|
|
+ /* pc += K */
|
|
+ emit_b(b_imm(i + k + 1, ctx), ctx);
|
|
+ emit_nop(ctx);
|
|
+ break;
|
|
+ case BPF_JMP | BPF_JEQ | BPF_K:
|
|
+ /* pc += ( A == K ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_EQ | MIPS_COND_K;
|
|
+ goto jmp_cmp;
|
|
+ case BPF_JMP | BPF_JEQ | BPF_X:
|
|
+ ctx->flags |= SEEN_X;
|
|
+ /* pc += ( A == X ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_EQ | MIPS_COND_X;
|
|
+ goto jmp_cmp;
|
|
+ case BPF_JMP | BPF_JGE | BPF_K:
|
|
+ /* pc += ( A >= K ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_GE | MIPS_COND_K;
|
|
+ goto jmp_cmp;
|
|
+ case BPF_JMP | BPF_JGE | BPF_X:
|
|
+ ctx->flags |= SEEN_X;
|
|
+ /* pc += ( A >= X ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_GE | MIPS_COND_X;
|
|
+ goto jmp_cmp;
|
|
+ case BPF_JMP | BPF_JGT | BPF_K:
|
|
+ /* pc += ( A > K ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_GT | MIPS_COND_K;
|
|
+ goto jmp_cmp;
|
|
+ case BPF_JMP | BPF_JGT | BPF_X:
|
|
+ ctx->flags |= SEEN_X;
|
|
+ /* pc += ( A > X ) ? pc->jt : pc->jf */
|
|
+ condt = MIPS_COND_GT | MIPS_COND_X;
|
|
+jmp_cmp:
|
|
+ /* Greater or Equal */
|
|
+ if ((condt & MIPS_COND_GE) ||
|
|
+ (condt & MIPS_COND_GT)) {
|
|
+ if (condt & MIPS_COND_K) { /* K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_sltiu(r_s0, r_A, k, ctx);
|
|
+ } else { /* X */
|
|
+ ctx->flags |= SEEN_A |
|
|
+ SEEN_X;
|
|
+ emit_sltu(r_s0, r_A, r_X, ctx);
|
|
+ }
|
|
+ /* A < (K|X) ? r_scrach = 1 */
|
|
+ b_off = b_imm(i + inst->jf + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off,
|
|
+ ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* A > (K|X) ? scratch = 0 */
|
|
+ if (condt & MIPS_COND_GT) {
|
|
+ /* Checking for equality */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ if (condt & MIPS_COND_K)
|
|
+ emit_load_imm(r_s0, k, ctx);
|
|
+ else
|
|
+ emit_jit_reg_move(r_s0, r_X,
|
|
+ ctx);
|
|
+ b_off = b_imm(i + inst->jf + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
|
|
+ b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* Finally, A > K|X */
|
|
+ b_off = b_imm(i + inst->jt + 1, ctx);
|
|
+ emit_b(b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ } else {
|
|
+ /* A >= (K|X) so jump */
|
|
+ b_off = b_imm(i + inst->jt + 1, ctx);
|
|
+ emit_b(b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ }
|
|
+ } else {
|
|
+ /* A == K|X */
|
|
+ if (condt & MIPS_COND_K) { /* K */
|
|
+ ctx->flags |= SEEN_A;
|
|
+ emit_load_imm(r_s0, k, ctx);
|
|
+ /* jump true */
|
|
+ b_off = b_imm(i + inst->jt + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
|
|
+ b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* jump false */
|
|
+ b_off = b_imm(i + inst->jf + 1,
|
|
+ ctx);
|
|
+ emit_bcond(MIPS_COND_NE, r_A, r_s0,
|
|
+ b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ } else { /* X */
|
|
+ /* jump true */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ b_off = b_imm(i + inst->jt + 1,
|
|
+ ctx);
|
|
+ emit_bcond(MIPS_COND_EQ, r_A, r_X,
|
|
+ b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* jump false */
|
|
+ b_off = b_imm(i + inst->jf + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_NE, r_A, r_X,
|
|
+ b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ }
|
|
+ }
|
|
+ break;
|
|
+ case BPF_JMP | BPF_JSET | BPF_K:
|
|
+ ctx->flags |= SEEN_A;
|
|
+ /* pc += (A & K) ? pc -> jt : pc -> jf */
|
|
+ emit_load_imm(r_s1, k, ctx);
|
|
+ emit_and(r_s0, r_A, r_s1, ctx);
|
|
+ /* jump true */
|
|
+ b_off = b_imm(i + inst->jt + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* jump false */
|
|
+ b_off = b_imm(i + inst->jf + 1, ctx);
|
|
+ emit_b(b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ break;
|
|
+ case BPF_JMP | BPF_JSET | BPF_X:
|
|
+ ctx->flags |= SEEN_X | SEEN_A;
|
|
+ /* pc += (A & X) ? pc -> jt : pc -> jf */
|
|
+ emit_and(r_s0, r_A, r_X, ctx);
|
|
+ /* jump true */
|
|
+ b_off = b_imm(i + inst->jt + 1, ctx);
|
|
+ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ /* jump false */
|
|
+ b_off = b_imm(i + inst->jf + 1, ctx);
|
|
+ emit_b(b_off, ctx);
|
|
+ emit_nop(ctx);
|
|
+ break;
|
|
+ case BPF_RET | BPF_A:
|
|
+ ctx->flags |= SEEN_A;
|
|
+ if (i != prog->len - 1)
|
|
+ /*
|
|
+ * If this is not the last instruction
|
|
+ * then jump to the epilogue
|
|
+ */
|
|
+ emit_b(b_imm(prog->len, ctx), ctx);
|
|
+ emit_reg_move(r_ret, r_A, ctx); /* delay slot */
|
|
+ break;
|
|
+ case BPF_RET | BPF_K:
|
|
+ /*
|
|
+ * It can emit two instructions so it does not fit on
|
|
+ * the delay slot.
|
|
+ */
|
|
+ emit_load_imm(r_ret, k, ctx);
|
|
+ if (i != prog->len - 1) {
|
|
+ /*
|
|
+ * If this is not the last instruction
|
|
+ * then jump to the epilogue
|
|
+ */
|
|
+ emit_b(b_imm(prog->len, ctx), ctx);
|
|
+ emit_nop(ctx);
|
|
+ }
|
|
+ break;
|
|
+ case BPF_MISC | BPF_TAX:
|
|
+ /* X = A */
|
|
+ ctx->flags |= SEEN_X | SEEN_A;
|
|
+ emit_jit_reg_move(r_X, r_A, ctx);
|
|
+ break;
|
|
+ case BPF_MISC | BPF_TXA:
|
|
+ /* A = X */
|
|
+ ctx->flags |= SEEN_A | SEEN_X;
|
|
+ emit_jit_reg_move(r_A, r_X, ctx);
|
|
+ break;
|
|
+ /* AUX */
|
|
+ case BPF_ANC | SKF_AD_PROTOCOL:
|
|
+ /* A = ntohs(skb->protocol */
|
|
+ ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A;
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
|
|
+ protocol) != 2);
|
|
+ off = offsetof(struct sk_buff, protocol);
|
|
+ emit_half_load(r_A, r_skb, off, ctx);
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+ /* This needs little endian fixup */
|
|
+ if (cpu_has_wsbh) {
|
|
+ /* R2 and later have the wsbh instruction */
|
|
+ emit_wsbh(r_A, r_A, ctx);
|
|
+ } else {
|
|
+ /* Get first byte */
|
|
+ emit_andi(r_tmp_imm, r_A, 0xff, ctx);
|
|
+ /* Shift it */
|
|
+ emit_sll(r_tmp, r_tmp_imm, 8, ctx);
|
|
+ /* Get second byte */
|
|
+ emit_srl(r_tmp_imm, r_A, 8, ctx);
|
|
+ emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx);
|
|
+ /* Put everyting together in r_A */
|
|
+ emit_or(r_A, r_tmp, r_tmp_imm, ctx);
|
|
+ }
|
|
+#endif
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_CPU:
|
|
+ ctx->flags |= SEEN_A | SEEN_OFF;
|
|
+ /* A = current_thread_info()->cpu */
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info,
|
|
+ cpu) != 4);
|
|
+ off = offsetof(struct thread_info, cpu);
|
|
+ /* $28/gp points to the thread_info struct */
|
|
+ emit_load(r_A, 28, off, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_IFINDEX:
|
|
+ /* A = skb->dev->ifindex */
|
|
+ case BPF_ANC | SKF_AD_HATYPE:
|
|
+ /* A = skb->dev->type */
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ off = offsetof(struct sk_buff, dev);
|
|
+ /* Load *dev pointer */
|
|
+ emit_load_ptr(r_s0, r_skb, off, ctx);
|
|
+ /* error (0) in the delay slot */
|
|
+ emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
|
|
+ b_imm(prog->len, ctx), ctx);
|
|
+ emit_reg_move(r_ret, r_zero, ctx);
|
|
+ if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
|
|
+ off = offsetof(struct net_device, ifindex);
|
|
+ emit_load(r_A, r_s0, off, ctx);
|
|
+ } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2);
|
|
+ off = offsetof(struct net_device, type);
|
|
+ emit_half_load_unsigned(r_A, r_s0, off, ctx);
|
|
+ }
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_MARK:
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
|
|
+ off = offsetof(struct sk_buff, mark);
|
|
+ emit_load(r_A, r_skb, off, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_RXHASH:
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
|
|
+ off = offsetof(struct sk_buff, hash);
|
|
+ emit_load(r_A, r_skb, off, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_VLAN_TAG:
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
|
|
+ vlan_tci) != 2);
|
|
+ off = offsetof(struct sk_buff, vlan_tci);
|
|
+ emit_half_load_unsigned(r_A, r_skb, off, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ emit_load_byte(r_A, r_skb, PKT_VLAN_PRESENT_OFFSET(), ctx);
|
|
+ if (PKT_VLAN_PRESENT_BIT)
|
|
+ emit_srl(r_A, r_A, PKT_VLAN_PRESENT_BIT, ctx);
|
|
+ if (PKT_VLAN_PRESENT_BIT < 7)
|
|
+ emit_andi(r_A, r_A, 1, ctx);
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_PKTTYPE:
|
|
+ ctx->flags |= SEEN_SKB;
|
|
+
|
|
+ emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx);
|
|
+ /* Keep only the last 3 bits */
|
|
+ emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx);
|
|
+#ifdef __BIG_ENDIAN_BITFIELD
|
|
+ /* Get the actual packet type to the lower 3 bits */
|
|
+ emit_srl(r_A, r_A, 5, ctx);
|
|
+#endif
|
|
+ break;
|
|
+ case BPF_ANC | SKF_AD_QUEUE:
|
|
+ ctx->flags |= SEEN_SKB | SEEN_A;
|
|
+ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
|
|
+ queue_mapping) != 2);
|
|
+ BUILD_BUG_ON(offsetof(struct sk_buff,
|
|
+ queue_mapping) > 0xff);
|
|
+ off = offsetof(struct sk_buff, queue_mapping);
|
|
+ emit_half_load_unsigned(r_A, r_skb, off, ctx);
|
|
+ break;
|
|
+ default:
|
|
+ pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__,
|
|
+ inst->code);
|
|
+ return -1;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* compute offsets only during the first pass */
|
|
+ if (ctx->target == NULL)
|
|
+ ctx->offsets[i] = ctx->idx * 4;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+void bpf_jit_compile(struct bpf_prog *fp)
|
|
+{
|
|
+ struct jit_ctx ctx;
|
|
+ unsigned int alloc_size, tmp_idx;
|
|
+
|
|
+ if (!bpf_jit_enable)
|
|
+ return;
|
|
+
|
|
+ memset(&ctx, 0, sizeof(ctx));
|
|
+
|
|
+ ctx.offsets = kcalloc(fp->len + 1, sizeof(*ctx.offsets), GFP_KERNEL);
|
|
+ if (ctx.offsets == NULL)
|
|
+ return;
|
|
+
|
|
+ ctx.skf = fp;
|
|
+
|
|
+ if (build_body(&ctx))
|
|
+ goto out;
|
|
+
|
|
+ tmp_idx = ctx.idx;
|
|
+ build_prologue(&ctx);
|
|
+ ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
|
|
+ /* just to complete the ctx.idx count */
|
|
+ build_epilogue(&ctx);
|
|
+
|
|
+ alloc_size = 4 * ctx.idx;
|
|
+ ctx.target = module_alloc(alloc_size);
|
|
+ if (ctx.target == NULL)
|
|
+ goto out;
|
|
+
|
|
+ /* Clean it */
|
|
+ memset(ctx.target, 0, alloc_size);
|
|
+
|
|
+ ctx.idx = 0;
|
|
+
|
|
+ /* Generate the actual JIT code */
|
|
+ build_prologue(&ctx);
|
|
+ build_body(&ctx);
|
|
+ build_epilogue(&ctx);
|
|
+
|
|
+ /* Update the icache */
|
|
+ flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx));
|
|
+
|
|
+ if (bpf_jit_enable > 1)
|
|
+ /* Dump JIT code */
|
|
+ bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
|
|
+
|
|
+ fp->bpf_func = (void *)ctx.target;
|
|
+ fp->jited = 1;
|
|
+
|
|
+out:
|
|
+ kfree(ctx.offsets);
|
|
+}
|
|
+
|
|
+void bpf_jit_free(struct bpf_prog *fp)
|
|
+{
|
|
+ if (fp->jited)
|
|
+ module_memfree(fp->bpf_func);
|
|
+
|
|
+ bpf_prog_unlock_free(fp);
|
|
+}
|
|
--- /dev/null
|
|
+++ b/arch/mips/net/bpf_jit_asm.S
|
|
@@ -0,0 +1,285 @@
|
|
+/*
|
|
+ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
|
|
+ * compiler.
|
|
+ *
|
|
+ * Copyright (C) 2015 Imagination Technologies Ltd.
|
|
+ * Author: Markos Chandras <markos.chandras@imgtec.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License as published by the
|
|
+ * Free Software Foundation; version 2 of the License.
|
|
+ */
|
|
+
|
|
+#include <asm/asm.h>
|
|
+#include <asm/isa-rev.h>
|
|
+#include <asm/regdef.h>
|
|
+#include "bpf_jit.h"
|
|
+
|
|
+/* ABI
|
|
+ *
|
|
+ * r_skb_hl skb header length
|
|
+ * r_skb_data skb data
|
|
+ * r_off(a1) offset register
|
|
+ * r_A BPF register A
|
|
+ * r_X PF register X
|
|
+ * r_skb(a0) *skb
|
|
+ * r_M *scratch memory
|
|
+ * r_skb_le skb length
|
|
+ * r_s0 Scratch register 0
|
|
+ * r_s1 Scratch register 1
|
|
+ *
|
|
+ * On entry:
|
|
+ * a0: *skb
|
|
+ * a1: offset (imm or imm + X)
|
|
+ *
|
|
+ * All non-BPF-ABI registers are free for use. On return, we only
|
|
+ * care about r_ret. The BPF-ABI registers are assumed to remain
|
|
+ * unmodified during the entire filter operation.
|
|
+ */
|
|
+
|
|
+#define skb a0
|
|
+#define offset a1
|
|
+#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */
|
|
+
|
|
+ /* We know better :) so prevent assembler reordering etc */
|
|
+ .set noreorder
|
|
+
|
|
+#define is_offset_negative(TYPE) \
|
|
+ /* If offset is negative we have more work to do */ \
|
|
+ slti t0, offset, 0; \
|
|
+ bgtz t0, bpf_slow_path_##TYPE##_neg; \
|
|
+ /* Be careful what follows in DS. */
|
|
+
|
|
+#define is_offset_in_header(SIZE, TYPE) \
|
|
+ /* Reading from header? */ \
|
|
+ addiu $r_s0, $r_skb_hl, -SIZE; \
|
|
+ slt t0, $r_s0, offset; \
|
|
+ bgtz t0, bpf_slow_path_##TYPE; \
|
|
+
|
|
+LEAF(sk_load_word)
|
|
+ is_offset_negative(word)
|
|
+FEXPORT(sk_load_word_positive)
|
|
+ is_offset_in_header(4, word)
|
|
+ /* Offset within header boundaries */
|
|
+ PTR_ADDU t1, $r_skb_data, offset
|
|
+ .set reorder
|
|
+ lw $r_A, 0(t1)
|
|
+ .set noreorder
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+# if MIPS_ISA_REV >= 2
|
|
+ wsbh t0, $r_A
|
|
+ rotr $r_A, t0, 16
|
|
+# else
|
|
+ sll t0, $r_A, 24
|
|
+ srl t1, $r_A, 24
|
|
+ srl t2, $r_A, 8
|
|
+ or t0, t0, t1
|
|
+ andi t2, t2, 0xff00
|
|
+ andi t1, $r_A, 0xff00
|
|
+ or t0, t0, t2
|
|
+ sll t1, t1, 8
|
|
+ or $r_A, t0, t1
|
|
+# endif
|
|
+#endif
|
|
+ jr $r_ra
|
|
+ move $r_ret, zero
|
|
+ END(sk_load_word)
|
|
+
|
|
+LEAF(sk_load_half)
|
|
+ is_offset_negative(half)
|
|
+FEXPORT(sk_load_half_positive)
|
|
+ is_offset_in_header(2, half)
|
|
+ /* Offset within header boundaries */
|
|
+ PTR_ADDU t1, $r_skb_data, offset
|
|
+ lhu $r_A, 0(t1)
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+# if MIPS_ISA_REV >= 2
|
|
+ wsbh $r_A, $r_A
|
|
+# else
|
|
+ sll t0, $r_A, 8
|
|
+ srl t1, $r_A, 8
|
|
+ andi t0, t0, 0xff00
|
|
+ or $r_A, t0, t1
|
|
+# endif
|
|
+#endif
|
|
+ jr $r_ra
|
|
+ move $r_ret, zero
|
|
+ END(sk_load_half)
|
|
+
|
|
+LEAF(sk_load_byte)
|
|
+ is_offset_negative(byte)
|
|
+FEXPORT(sk_load_byte_positive)
|
|
+ is_offset_in_header(1, byte)
|
|
+ /* Offset within header boundaries */
|
|
+ PTR_ADDU t1, $r_skb_data, offset
|
|
+ lbu $r_A, 0(t1)
|
|
+ jr $r_ra
|
|
+ move $r_ret, zero
|
|
+ END(sk_load_byte)
|
|
+
|
|
+/*
|
|
+ * call skb_copy_bits:
|
|
+ * (prototype in linux/skbuff.h)
|
|
+ *
|
|
+ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
|
|
+ *
|
|
+ * o32 mandates we leave 4 spaces for argument registers in case
|
|
+ * the callee needs to use them. Even though we don't care about
|
|
+ * the argument registers ourselves, we need to allocate that space
|
|
+ * to remain ABI compliant since the callee may want to use that space.
|
|
+ * We also allocate 2 more spaces for $r_ra and our return register (*to).
|
|
+ *
|
|
+ * n64 is a bit different. The *caller* will allocate the space to preserve
|
|
+ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
|
|
+ * good reason but it does not matter that much really.
|
|
+ *
|
|
+ * (void *to) is returned in r_s0
|
|
+ *
|
|
+ */
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+#define DS_OFFSET(SIZE) (4 * SZREG)
|
|
+#else
|
|
+#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
|
|
+#endif
|
|
+#define bpf_slow_path_common(SIZE) \
|
|
+ /* Quick check. Are we within reasonable boundaries? */ \
|
|
+ LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \
|
|
+ sltu $r_s0, offset, $r_s1; \
|
|
+ beqz $r_s0, fault; \
|
|
+ /* Load 4th argument in DS */ \
|
|
+ LONG_ADDIU a3, zero, SIZE; \
|
|
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
|
|
+ PTR_LA t0, skb_copy_bits; \
|
|
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
|
|
+ /* Assign low slot to a2 */ \
|
|
+ PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \
|
|
+ jalr t0; \
|
|
+ /* Reset our destination slot (DS but it's ok) */ \
|
|
+ INT_S zero, (4 * SZREG)($r_sp); \
|
|
+ /* \
|
|
+ * skb_copy_bits returns 0 on success and -EFAULT \
|
|
+ * on error. Our data live in a2. Do not bother with \
|
|
+ * our data if an error has been returned. \
|
|
+ */ \
|
|
+ /* Restore our frame */ \
|
|
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
|
|
+ INT_L $r_s0, (4 * SZREG)($r_sp); \
|
|
+ bltz v0, fault; \
|
|
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
|
|
+ move $r_ret, zero; \
|
|
+
|
|
+NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
|
|
+ bpf_slow_path_common(4)
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+# if MIPS_ISA_REV >= 2
|
|
+ wsbh t0, $r_s0
|
|
+ jr $r_ra
|
|
+ rotr $r_A, t0, 16
|
|
+# else
|
|
+ sll t0, $r_s0, 24
|
|
+ srl t1, $r_s0, 24
|
|
+ srl t2, $r_s0, 8
|
|
+ or t0, t0, t1
|
|
+ andi t2, t2, 0xff00
|
|
+ andi t1, $r_s0, 0xff00
|
|
+ or t0, t0, t2
|
|
+ sll t1, t1, 8
|
|
+ jr $r_ra
|
|
+ or $r_A, t0, t1
|
|
+# endif
|
|
+#else
|
|
+ jr $r_ra
|
|
+ move $r_A, $r_s0
|
|
+#endif
|
|
+
|
|
+ END(bpf_slow_path_word)
|
|
+
|
|
+NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
|
|
+ bpf_slow_path_common(2)
|
|
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
|
|
+# if MIPS_ISA_REV >= 2
|
|
+ jr $r_ra
|
|
+ wsbh $r_A, $r_s0
|
|
+# else
|
|
+ sll t0, $r_s0, 8
|
|
+ andi t1, $r_s0, 0xff00
|
|
+ andi t0, t0, 0xff00
|
|
+ srl t1, t1, 8
|
|
+ jr $r_ra
|
|
+ or $r_A, t0, t1
|
|
+# endif
|
|
+#else
|
|
+ jr $r_ra
|
|
+ move $r_A, $r_s0
|
|
+#endif
|
|
+
|
|
+ END(bpf_slow_path_half)
|
|
+
|
|
+NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
|
|
+ bpf_slow_path_common(1)
|
|
+ jr $r_ra
|
|
+ move $r_A, $r_s0
|
|
+
|
|
+ END(bpf_slow_path_byte)
|
|
+
|
|
+/*
|
|
+ * Negative entry points
|
|
+ */
|
|
+ .macro bpf_is_end_of_data
|
|
+ li t0, SKF_LL_OFF
|
|
+ /* Reading link layer data? */
|
|
+ slt t1, offset, t0
|
|
+ bgtz t1, fault
|
|
+ /* Be careful what follows in DS. */
|
|
+ .endm
|
|
+/*
|
|
+ * call skb_copy_bits:
|
|
+ * (prototype in linux/filter.h)
|
|
+ *
|
|
+ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
|
|
+ * int k, unsigned int size)
|
|
+ *
|
|
+ * see above (bpf_slow_path_common) for ABI restrictions
|
|
+ */
|
|
+#define bpf_negative_common(SIZE) \
|
|
+ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
|
|
+ PTR_LA t0, bpf_internal_load_pointer_neg_helper; \
|
|
+ PTR_S $r_ra, (5 * SZREG)($r_sp); \
|
|
+ jalr t0; \
|
|
+ li a2, SIZE; \
|
|
+ PTR_L $r_ra, (5 * SZREG)($r_sp); \
|
|
+ /* Check return pointer */ \
|
|
+ beqz v0, fault; \
|
|
+ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
|
|
+ /* Preserve our pointer */ \
|
|
+ move $r_s0, v0; \
|
|
+ /* Set return value */ \
|
|
+ move $r_ret, zero; \
|
|
+
|
|
+bpf_slow_path_word_neg:
|
|
+ bpf_is_end_of_data
|
|
+NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
|
|
+ bpf_negative_common(4)
|
|
+ jr $r_ra
|
|
+ lw $r_A, 0($r_s0)
|
|
+ END(sk_load_word_negative)
|
|
+
|
|
+bpf_slow_path_half_neg:
|
|
+ bpf_is_end_of_data
|
|
+NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
|
|
+ bpf_negative_common(2)
|
|
+ jr $r_ra
|
|
+ lhu $r_A, 0($r_s0)
|
|
+ END(sk_load_half_negative)
|
|
+
|
|
+bpf_slow_path_byte_neg:
|
|
+ bpf_is_end_of_data
|
|
+NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
|
|
+ bpf_negative_common(1)
|
|
+ jr $r_ra
|
|
+ lbu $r_A, 0($r_s0)
|
|
+ END(sk_load_byte_negative)
|
|
+
|
|
+fault:
|
|
+ jr $r_ra
|
|
+ addiu $r_ret, zero, 1
|