mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 23:42:43 +00:00
584d7c53bd
This commit introduces new subtarget for Marvell EBU Armada Cortex A53
processor based devices.
The first device is Globalscale ESPRESSObin. Some hardware specs:
SoC: Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53
processor up to 1.2GHz
RAM: 512MB, 1GB or 2GB DDR3
Storage: SATA interface
µSD card slot with footprint for an optional 4GB EMMC
4MB SPI NOR flash for bootloader
Ethernet: Topaz Networking Switch (88E6341) with 3x GbE ports
Connectors: USB 3.0
USB 2.0
µUSB port connected to PL2303SA (USB to serial bridge
controller) for UART access
Expansion: 2x 46-pin GPIO headers for accessories and shields with
I2C, GPIOs, PWM, UART, SPI, MMC, etc
MiniPCIe slot
Misc: Reset button, JTAG interface
Currently booting only from µSD card is supported.
The boards depending on date of dispatch can come with various U-Boot
versions. For the newest version 2017.03-armada-17.10 no manual
intervention should be needed to boot OpenWrt image. For the older ones
it's necessary to modify default U-Boot environment:
1. Interrupt boot process to run U-Boot command line,
2. Run following commands:
(for version 2017.03-armada-17.06 and 2017.03-armada-17.08)
setenv bootcmd "load mmc 0:1 0x4d00000 boot.scr; source 0x4d00000"
saveenv
(for version 2015.01-armada-17.02 and 2015.01-armada-17.04)
setenv bootargs "console=ttyMV0,115200 root=/dev/mmcblk0p2 rw rootwait"
setenv bootcmd "ext4load mmc 0:1 ${fdt_addr} armada-3720-espressobin.dtb; ext4load mmc 0:1 ${kernel_addr} Image; booti ${kernel_addr} - ${fdt_addr}"
saveenv
3. Poweroff, insert SD card with OpenWrt image, boot and enjoy.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
144 lines
5.3 KiB
Diff
144 lines
5.3 KiB
Diff
From patchwork Thu Sep 28 12:58:35 2017
|
|
Content-Type: text/plain; charset="utf-8"
|
|
MIME-Version: 1.0
|
|
Content-Transfer-Encoding: 7bit
|
|
Subject: [v2,
|
|
4/7] PCI: aardvark: use isr1 instead of isr0 interrupt in legacy irq
|
|
mode
|
|
X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
X-Patchwork-Id: 819592
|
|
Message-Id: <20170928125838.11887-5-thomas.petazzoni@free-electrons.com>
|
|
To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
|
|
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
|
|
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
|
|
<gregory.clement@free-electrons.com>,
|
|
Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
|
|
Yehuda Yitschak <yehuday@marvell.com>,
|
|
linux-arm-kernel@lists.infradead.org, Antoine Tenart
|
|
<antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
|
|
<miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
|
|
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
Date: Thu, 28 Sep 2017 14:58:35 +0200
|
|
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
List-Id: <linux-pci.vger.kernel.org>
|
|
|
|
From: Victor Gu <xigu@marvell.com>
|
|
|
|
The Aardvark has two interrupts sets:
|
|
|
|
- first set is bit[23:16] of PCIe ISR 0 register(RD0074840h)
|
|
|
|
- second set is bit[11:8] of PCIe ISR 1 register(RD0074848h)
|
|
|
|
Only one set should be used, while another set should be masked.
|
|
|
|
The second set, ISR1, is more advanced, the Legacy INT_X status bit is
|
|
asserted once Assert_INTX message is received, and de-asserted after
|
|
Deassert_INTX message is received. Therefore, it matches what the
|
|
driver is currently doing in the ->irq_mask() and ->irq_unmask()
|
|
functions. The ISR0 requires additional work to deassert the
|
|
interrupt, which the driver doesn't do currently.
|
|
|
|
This commit resolves a number of issues with legacy interrupts.
|
|
|
|
This is part of fixing bug
|
|
https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
|
|
reported as the user to be important to get a Intel 7260 mini-PCIe
|
|
WiFi card working.
|
|
|
|
Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
|
|
Signed-off-by: Victor Gu <xigu@marvell.com>
|
|
Reviewed-by: Evan Wang <xswang@marvell.com>
|
|
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
|
|
[Thomas: tweak commit log.]
|
|
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
---
|
|
drivers/pci/host/pci-aardvark.c | 41 ++++++++++++++++++++++++-----------------
|
|
1 file changed, 24 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/pci/host/pci-aardvark.c
|
|
+++ b/drivers/pci/host/pci-aardvark.c
|
|
@@ -105,7 +105,8 @@
|
|
#define PCIE_ISR1_MASK_REG (CONTROL_BASE_ADDR + 0x4C)
|
|
#define PCIE_ISR1_POWER_STATE_CHANGE BIT(4)
|
|
#define PCIE_ISR1_FLUSH BIT(5)
|
|
-#define PCIE_ISR1_ALL_MASK GENMASK(5, 4)
|
|
+#define PCIE_ISR1_INTX_ASSERT(val) BIT(8 + (val))
|
|
+#define PCIE_ISR1_ALL_MASK GENMASK(11, 4)
|
|
#define PCIE_MSI_ADDR_LOW_REG (CONTROL_BASE_ADDR + 0x50)
|
|
#define PCIE_MSI_ADDR_HIGH_REG (CONTROL_BASE_ADDR + 0x54)
|
|
#define PCIE_MSI_STATUS_REG (CONTROL_BASE_ADDR + 0x58)
|
|
@@ -615,9 +616,9 @@ static void advk_pcie_irq_mask(struct ir
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
u32 mask;
|
|
|
|
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
- mask |= PCIE_ISR0_INTX_ASSERT(hwirq);
|
|
- advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
|
|
+ mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
+ mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
|
|
+ advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
|
|
}
|
|
|
|
static void advk_pcie_irq_unmask(struct irq_data *d)
|
|
@@ -626,9 +627,9 @@ static void advk_pcie_irq_unmask(struct
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
u32 mask;
|
|
|
|
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
- mask &= ~PCIE_ISR0_INTX_ASSERT(hwirq);
|
|
- advk_writel(pcie, mask, PCIE_ISR0_MASK_REG);
|
|
+ mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
+ mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
|
|
+ advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
|
|
}
|
|
|
|
static int advk_pcie_irq_map(struct irq_domain *h,
|
|
@@ -771,29 +772,35 @@ static void advk_pcie_handle_msi(struct
|
|
|
|
static void advk_pcie_handle_int(struct advk_pcie *pcie)
|
|
{
|
|
- u32 val, mask, status;
|
|
+ u32 isr0_val, isr0_mask, isr0_status;
|
|
+ u32 isr1_val, isr1_mask, isr1_status;
|
|
int i, virq;
|
|
|
|
- val = advk_readl(pcie, PCIE_ISR0_REG);
|
|
- mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
- status = val & ((~mask) & PCIE_ISR0_ALL_MASK);
|
|
-
|
|
- if (!status) {
|
|
- advk_writel(pcie, val, PCIE_ISR0_REG);
|
|
+ isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
|
|
+ isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
|
|
+ isr0_status = isr0_val & ((~isr0_mask) & PCIE_ISR0_ALL_MASK);
|
|
+
|
|
+ isr1_val = advk_readl(pcie, PCIE_ISR1_REG);
|
|
+ isr1_mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
|
|
+ isr1_status = isr1_val & ((~isr1_mask) & PCIE_ISR1_ALL_MASK);
|
|
+
|
|
+ if (!isr0_status && !isr1_status) {
|
|
+ advk_writel(pcie, isr0_val, PCIE_ISR0_REG);
|
|
+ advk_writel(pcie, isr1_val, PCIE_ISR1_REG);
|
|
return;
|
|
}
|
|
|
|
/* Process MSI interrupts */
|
|
- if (status & PCIE_ISR0_MSI_INT_PENDING)
|
|
+ if (isr0_status & PCIE_ISR0_MSI_INT_PENDING)
|
|
advk_pcie_handle_msi(pcie);
|
|
|
|
/* Process legacy interrupts */
|
|
for (i = 0; i < PCI_NUM_INTX; i++) {
|
|
- if (!(status & PCIE_ISR0_INTX_ASSERT(i)))
|
|
+ if (!(isr1_status & PCIE_ISR1_INTX_ASSERT(i)))
|
|
continue;
|
|
|
|
- advk_writel(pcie, PCIE_ISR0_INTX_ASSERT(i),
|
|
- PCIE_ISR0_REG);
|
|
+ advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
|
|
+ PCIE_ISR1_REG);
|
|
|
|
virq = irq_find_mapping(pcie->irq_domain, i);
|
|
generic_handle_irq(virq);
|