mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
aa94e34c1d
The Linksys E8450, also known as Belkin RT3200, is a dual-band
IEEE 802.11bgn/ac/ax router based on MediaTek MT7622BV and
MediaTek MT7915AN chips.
FCC: K7S-03571 and K7S-03572
Hardware highlights:
- CPU: MediaTek MT7622BV (2x ARM Cortex-A53 @ 1350 MHz max.)
- RAM: 512MB DDR3
- Flash: 128MB SPI-NAND (2k+64)
- Ethernet: MT7531BE switch with 5 1000Base-T ports
CPU port connected with 2500Base-X
- WiFi 2.4 GHz: 802.11bgn 4T4R built-in antennas
MT7622VB built-in
- WiFi 5 GHz: 802.11ac/ax 4T4R built-in antennas
MT7915AN chip on-board via PCIe
MT7975AN front-end
- Buttons: Reset and WPS
- LEDS: 3 user controllable LEDs, 4 wired to switch
- USB: USB2.0, single port
- no Bluetooth (supported by SoC, not wired on board)
- Serial: JST PH 2.0MM 6 Pin connector inside device
----_____________----
[ GND RX - TX - - ]
---------------------
- JTAG: unpopulated ARM JTAG 20-pin connector (works)
This commit adds support for the device in a way that is compatible
with the vendor firmware's bootloader and dual-boot flash layout, the
resulting image can directly be flashed using the vendor firmware.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
123 lines
3.9 KiB
Diff
123 lines
3.9 KiB
Diff
From ea0df4552efcdcc2806fe6eba0540b5f719d80b6 Mon Sep 17 00:00:00 2001
|
|
From: Davide Fioravanti <pantanastyle@gmail.com>
|
|
Date: Fri, 8 Jan 2021 15:35:24 +0100
|
|
Subject: [PATCH 1/1] mtd: spinand: Add support for the Fidelix FM35X1GA
|
|
|
|
Datasheet: http://www.hobos.com.cn/upload/datasheet/DS35X1GAXXX_100_rev00.pdf
|
|
|
|
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
|
|
---
|
|
drivers/mtd/nand/spi/Makefile | 2 +-
|
|
drivers/mtd/nand/spi/core.c | 1 +
|
|
drivers/mtd/nand/spi/fidelix.c | 80 ++++++++++++++++++++++++++++++++++
|
|
include/linux/mtd/spinand.h | 1 +
|
|
4 files changed, 83 insertions(+), 1 deletion(-)
|
|
create mode 100644 drivers/mtd/nand/spi/fidelix.c
|
|
|
|
--- a/drivers/mtd/nand/spi/Makefile
|
|
+++ b/drivers/mtd/nand/spi/Makefile
|
|
@@ -1,3 +1,3 @@
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
-spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
|
|
+spinand-objs := core.o fidelix.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
|
|
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
|
|
--- a/drivers/mtd/nand/spi/core.c
|
|
+++ b/drivers/mtd/nand/spi/core.c
|
|
@@ -755,6 +755,7 @@ static const struct nand_ops spinand_ops
|
|
};
|
|
|
|
static const struct spinand_manufacturer *spinand_manufacturers[] = {
|
|
+ &fidelix_spinand_manufacturer,
|
|
&gigadevice_spinand_manufacturer,
|
|
¯onix_spinand_manufacturer,
|
|
µn_spinand_manufacturer,
|
|
--- /dev/null
|
|
+++ b/drivers/mtd/nand/spi/fidelix.c
|
|
@@ -0,0 +1,76 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Copyright (c) 2020 Davide Fioravanti <pantanastyle@gmail.com>
|
|
+ */
|
|
+
|
|
+#include <linux/device.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/mtd/spinand.h>
|
|
+
|
|
+#define SPINAND_MFR_FIDELIX 0xE5
|
|
+#define FIDELIX_ECCSR_MASK 0x0F
|
|
+
|
|
+static SPINAND_OP_VARIANTS(read_cache_variants,
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
|
|
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
|
|
+
|
|
+static SPINAND_OP_VARIANTS(write_cache_variants,
|
|
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
|
|
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
|
|
+
|
|
+static SPINAND_OP_VARIANTS(update_cache_variants,
|
|
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
|
|
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
|
|
+
|
|
+static int fm35x1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
+ struct mtd_oob_region *region)
|
|
+{
|
|
+ if (section > 3)
|
|
+ return -ERANGE;
|
|
+
|
|
+ region->offset = (16 * section) + 8;
|
|
+ region->length = 8;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int fm35x1ga_ooblayout_free(struct mtd_info *mtd, int section,
|
|
+ struct mtd_oob_region *region)
|
|
+{
|
|
+ if (section > 3)
|
|
+ return -ERANGE;
|
|
+
|
|
+ region->offset = (16 * section) + 2;
|
|
+ region->length = 6;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct mtd_ooblayout_ops fm35x1ga_ooblayout = {
|
|
+ .ecc = fm35x1ga_ooblayout_ecc,
|
|
+ .free = fm35x1ga_ooblayout_free,
|
|
+};
|
|
+
|
|
+static const struct spinand_info fidelix_spinand_table[] = {
|
|
+ SPINAND_INFO("FM35X1GA",
|
|
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x71),
|
|
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
|
|
+ NAND_ECCREQ(4, 512),
|
|
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
|
|
+ &write_cache_variants,
|
|
+ &update_cache_variants),
|
|
+ SPINAND_HAS_QE_BIT,
|
|
+ SPINAND_ECCINFO(&fm35x1ga_ooblayout, NULL)),
|
|
+};
|
|
+
|
|
+static const struct spinand_manufacturer_ops fidelix_spinand_manuf_ops = {
|
|
+};
|
|
+
|
|
+const struct spinand_manufacturer fidelix_spinand_manufacturer = {
|
|
+ .id = SPINAND_MFR_FIDELIX,
|
|
+ .name = "Fidelix",
|
|
+ .chips = fidelix_spinand_table,
|
|
+ .nchips = ARRAY_SIZE(fidelix_spinand_table),
|
|
+ .ops = &fidelix_spinand_manuf_ops,
|
|
+};
|
|
--- a/include/linux/mtd/spinand.h
|
|
+++ b/include/linux/mtd/spinand.h
|
|
@@ -238,6 +238,7 @@ struct spinand_manufacturer {
|
|
};
|
|
|
|
/* SPI NAND manufacturers */
|
|
+extern const struct spinand_manufacturer fidelix_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
|
|
extern const struct spinand_manufacturer micron_spinand_manufacturer;
|