mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
b7a8a54542
This patch adds support for the MikroTik RouterBOARD RB493G, ported from the ar71xx target. See https://routerboard.com/RB493G for details Specification: - SoC Qualcomm Atheros AR7161 - RAM: 256 MiB - Storage: 128MiB NAND - Ethernet: 9x 1000/100/10 Mbps - USB 1x 2.0 / 1.0 type A - PCIe: 3x Mini slot - MicroSD slot Working: - Board/system detection - Ethernet - SPI - NAND - LEDs - USB - Sysupgrade Enabled (but untested due to lack of hardware): - PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed Installation methods: - tftp boot initramfs image, scp then flash via "sysupgrade -n" - nand boot existing OpenWrt, scp then flash via "sysupgrade -n" Notes: - initramfs image will not work if uncompressed image size over ~8.5Mb - The "rb4xx" drivers have been enabled Signed-off-by: Christopher Hill <ch6574@gmail.com>
54 lines
772 B
Plaintext
54 lines
772 B
Plaintext
// SPDX-License-Identifier: GPL-1.0-or-later OR MIT
|
|
/dts-v1/;
|
|
|
|
#include "ar7100_mikrotik_routerboard-4xx.dtsi"
|
|
|
|
/ {
|
|
compatible = "mikrotik,routerboard-493g", "qca,ar7161";
|
|
model = "MikroTik RouterBOARD 493G";
|
|
|
|
aliases {
|
|
mdio-gpio0 = &mdio_gpio0;
|
|
};
|
|
};
|
|
|
|
&spi {
|
|
sdcard: mmc-slot@2 {
|
|
compatible = "mmc-spi-slot";
|
|
|
|
reg = <2>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
status = "okay";
|
|
|
|
phy-handle = <&gpio_phy0>;
|
|
|
|
mdio_gpio0: mdio-gpio {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>, // MDC
|
|
<&gpio 8 GPIO_ACTIVE_HIGH>; // MDIO
|
|
|
|
gpio_phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
};
|