mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
4295485719
Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
92 lines
3.6 KiB
Diff
92 lines
3.6 KiB
Diff
From a7544b1d73143b69134dd9ec665d0013775aca50 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 5 Dec 2018 11:56:40 +0000
|
|
Subject: [PATCH 292/703] overlays: Update README with removal of lirc-rpi
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 57 ++++++++++++-------------------
|
|
1 file changed, 21 insertions(+), 36 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -56,23 +56,29 @@ have its contents deleted (or commented
|
|
Using Overlays
|
|
==============
|
|
|
|
-Overlays are loaded using the "dtoverlay" directive. As an example, consider
|
|
-the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
|
|
-pre-DT world this would be loaded from /etc/modules, with an explicit
|
|
-"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled,
|
|
-this becomes a line in config.txt:
|
|
-
|
|
- dtoverlay=lirc-rpi
|
|
-
|
|
-This causes the file /boot/overlays/lirc-rpi.dtbo to be loaded. By
|
|
-default it will use GPIOs 17 (out) and 18 (in), but this can be modified using
|
|
-DT parameters:
|
|
-
|
|
- dtoverlay=lirc-rpi,gpio_out_pin=17,gpio_in_pin=13
|
|
-
|
|
-Parameters always have default values, although in some cases (e.g. "w1-gpio")
|
|
-it is necessary to provided multiple overlays in order to get the desired
|
|
-behaviour. See the list of overlays below for a description of the parameters
|
|
+Overlays are loaded using the "dtoverlay" config.txt setting. As an example,
|
|
+consider I2C Real Time Clock drivers. In the pre-DT world these would be loaded
|
|
+by writing a magic string comprising a device identifier and an I2C address to
|
|
+a special file in /sys/class/i2c-adapter, having first loaded the driver for
|
|
+the I2C interface and the RTC device - something like this:
|
|
+
|
|
+ modprobe i2c-bcm2835
|
|
+ modprobe rtc-ds1307
|
|
+ echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device
|
|
+
|
|
+With DT enabled, this becomes a line in config.txt:
|
|
+
|
|
+ dtoverlay=i2c-rtc,ds1307
|
|
+
|
|
+This causes the file /boot/overlays/i2c-rtc.dtbo to be loaded and a "node"
|
|
+describing the DS1307 I2C device to be added to the Device Tree for the Pi. By
|
|
+default it usees address 0x68, but this can be modified with an additional DT
|
|
+parameter:
|
|
+
|
|
+ dtoverlay=i2c-rtc,ds1307,addr=0x68
|
|
+
|
|
+Parameters usually have default values, although certain parameters are
|
|
+mandatory. See the list of overlays below for a description of the parameters
|
|
and their defaults.
|
|
|
|
The Overlay and Parameter Reference
|
|
@@ -1135,29 +1141,8 @@ Params: <None>
|
|
|
|
|
|
Name: lirc-rpi
|
|
-Info: Configures lirc-rpi (Linux Infrared Remote Control for Raspberry Pi)
|
|
- Consult the module documentation for more details.
|
|
-Load: dtoverlay=lirc-rpi,<param>=<val>
|
|
-Params: gpio_out_pin GPIO for output (default "17")
|
|
-
|
|
- gpio_in_pin GPIO for input (default "18")
|
|
-
|
|
- gpio_in_pull Pull up/down/off on the input pin
|
|
- (default "down")
|
|
-
|
|
- sense Override the IR receive auto-detection logic:
|
|
- "0" = force active-high
|
|
- "1" = force active-low
|
|
- "-1" = use auto-detection
|
|
- (default "-1")
|
|
-
|
|
- softcarrier Turn the software carrier "on" or "off"
|
|
- (default "on")
|
|
-
|
|
- invert "on" = invert the output pin (default "off")
|
|
-
|
|
- debug "on" = enable additional debug messages
|
|
- (default "off")
|
|
+Info: This overlay has been deprecated and removed - see gpio-ir
|
|
+Load: <Deprecated>
|
|
|
|
|
|
Name: ltc294x
|