mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
4295485719
Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
30 lines
1.1 KiB
Diff
30 lines
1.1 KiB
Diff
From 3ff31acbe9b371f1b9247cc50e7751eaf98b4cef Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 23 Feb 2016 17:26:48 +0000
|
|
Subject: [PATCH 034/703] amba_pl011: Don't use DT aliases for numbering
|
|
|
|
The pl011 driver looks for DT aliases of the form "serial<n>",
|
|
and if found uses <n> as the device ID. This can cause
|
|
/dev/ttyAMA0 to become /dev/ttyAMA1, which is confusing if the
|
|
other serial port is provided by the 8250 driver which doesn't
|
|
use the same logic.
|
|
---
|
|
drivers/tty/serial/amba-pl011.c | 5 +++++
|
|
1 file changed, 5 insertions(+)
|
|
|
|
--- a/drivers/tty/serial/amba-pl011.c
|
|
+++ b/drivers/tty/serial/amba-pl011.c
|
|
@@ -2578,7 +2578,12 @@ static int pl011_setup_port(struct devic
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
+ /* Don't use DT serial<n> aliases - it causes the device to
|
|
+ be renumbered to ttyAMA1 if it is the second serial port in the
|
|
+ system, even though the other one is ttyS0. The 8250 driver
|
|
+ doesn't use this logic, so always remains ttyS0.
|
|
index = pl011_probe_dt_alias(index, dev);
|
|
+ */
|
|
|
|
uap->old_cr = 0;
|
|
uap->port.dev = dev;
|