mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
88ba41453d
Refresh patches. Remove upstreamed patches: - backport/080-v4.15-0001-arch-define-weak-abort.patch - backport/081-v4.15-0002-kernel-exit.c-export-abort-to-modules.patch Update patch that no longer applies: pending/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch Fixes CVE-2017-8824. Compile-tested: octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
140 lines
4.4 KiB
Diff
140 lines
4.4 KiB
Diff
From 69a99101748bb1bdb2730393ef48bc152c4d244a Mon Sep 17 00:00:00 2001
|
|
From: Tim Harvey <tharvey@gateworks.com>
|
|
Date: Tue, 12 Dec 2017 12:49:55 -0800
|
|
Subject: [PATCH] net: thunderx: add support for rgmii internal delay modes
|
|
|
|
The XCV_DLL_CTL is being configured with the assumption that
|
|
phy-mode is rgmii-txid (PHY_INTERFACE_MODE_RGMII_TXID) which is not always
|
|
the case.
|
|
|
|
This patch parses the phy-mode property and uses it to configure CXV_DLL_CTL
|
|
properly.
|
|
|
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
|
---
|
|
drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 13 +++++++---
|
|
drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 +-
|
|
drivers/net/ethernet/cavium/thunder/thunder_xcv.c | 31 ++++++++++++++++++-----
|
|
3 files changed, 35 insertions(+), 11 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
|
|
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c
|
|
@@ -55,6 +55,7 @@ struct bgx {
|
|
struct pci_dev *pdev;
|
|
bool is_dlm;
|
|
bool is_rgx;
|
|
+ int phy_mode;
|
|
};
|
|
|
|
static struct bgx *bgx_vnic[MAX_BGX_THUNDER];
|
|
@@ -841,12 +842,12 @@ static void bgx_poll_for_link(struct wor
|
|
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
|
|
}
|
|
|
|
-static int phy_interface_mode(u8 lmac_type)
|
|
+static int phy_interface_mode(struct bgx *bgx, u8 lmac_type)
|
|
{
|
|
if (lmac_type == BGX_MODE_QSGMII)
|
|
return PHY_INTERFACE_MODE_QSGMII;
|
|
if (lmac_type == BGX_MODE_RGMII)
|
|
- return PHY_INTERFACE_MODE_RGMII;
|
|
+ return bgx->phy_mode;
|
|
|
|
return PHY_INTERFACE_MODE_SGMII;
|
|
}
|
|
@@ -912,7 +913,8 @@ static int bgx_lmac_enable(struct bgx *b
|
|
|
|
if (phy_connect_direct(&lmac->netdev, lmac->phydev,
|
|
bgx_lmac_handler,
|
|
- phy_interface_mode(lmac->lmac_type)))
|
|
+ phy_interface_mode(bgx,
|
|
+ lmac->lmac_type)))
|
|
return -ENODEV;
|
|
|
|
phy_start_aneg(lmac->phydev);
|
|
@@ -1287,6 +1289,8 @@ static int bgx_init_of_phy(struct bgx *b
|
|
bgx->lmac[lmac].lmacid = lmac;
|
|
|
|
phy_np = of_parse_phandle(node, "phy-handle", 0);
|
|
+ if (phy_np)
|
|
+ bgx->phy_mode = of_get_phy_mode(phy_np);
|
|
/* If there is no phy or defective firmware presents
|
|
* this cortina phy, for which there is no driver
|
|
* support, ignore it.
|
|
@@ -1390,7 +1394,6 @@ static int bgx_probe(struct pci_dev *pde
|
|
bgx->max_lmac = 1;
|
|
bgx->bgx_id = MAX_BGX_PER_CN81XX - 1;
|
|
bgx_vnic[bgx->bgx_id] = bgx;
|
|
- xcv_init_hw();
|
|
}
|
|
|
|
/* On 81xx all are DLMs and on 83xx there are 3 BGX QLMs and one
|
|
@@ -1407,6 +1410,8 @@ static int bgx_probe(struct pci_dev *pde
|
|
if (err)
|
|
goto err_enable;
|
|
|
|
+ if (bgx->is_rgx)
|
|
+ xcv_init_hw(bgx->phy_mode);
|
|
bgx_init_hw(bgx);
|
|
|
|
/* Enable all LMACs */
|
|
--- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
|
|
+++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h
|
|
@@ -226,7 +226,7 @@ void bgx_lmac_internal_loopback(int node
|
|
void bgx_lmac_get_pfc(int node, int bgx_idx, int lmacid, void *pause);
|
|
void bgx_lmac_set_pfc(int node, int bgx_idx, int lmacid, void *pause);
|
|
|
|
-void xcv_init_hw(void);
|
|
+void xcv_init_hw(int phy_mode);
|
|
void xcv_setup_link(bool link_up, int link_speed);
|
|
|
|
u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx);
|
|
--- a/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
|
|
+++ b/drivers/net/ethernet/cavium/thunder/thunder_xcv.c
|
|
@@ -65,7 +65,7 @@ MODULE_LICENSE("GPL v2");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DEVICE_TABLE(pci, xcv_id_table);
|
|
|
|
-void xcv_init_hw(void)
|
|
+void xcv_init_hw(int phy_mode)
|
|
{
|
|
u64 cfg;
|
|
|
|
@@ -81,12 +81,31 @@ void xcv_init_hw(void)
|
|
/* Wait for DLL to lock */
|
|
msleep(1);
|
|
|
|
- /* Configure DLL - enable or bypass
|
|
- * TX no bypass, RX bypass
|
|
- */
|
|
+ /* enable/bypass DLL providing MAC based internal TX/RX delays */
|
|
cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL);
|
|
- cfg &= ~0xFF03;
|
|
- cfg |= CLKRX_BYP;
|
|
+ cfg &= ~0xffff00;
|
|
+ switch (phy_mode) {
|
|
+ /* RX and TX delays are added by the MAC */
|
|
+ case PHY_INTERFACE_MODE_RGMII:
|
|
+ break;
|
|
+ /* internal RX and TX delays provided by the PHY */
|
|
+ case PHY_INTERFACE_MODE_RGMII_ID:
|
|
+ cfg |= CLKRX_BYP;
|
|
+ cfg |= CLKTX_BYP;
|
|
+ break;
|
|
+ /* internal RX delay provided by the PHY, the MAC
|
|
+ * should not add an RX delay in this case
|
|
+ */
|
|
+ case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
+ cfg |= CLKRX_BYP;
|
|
+ break;
|
|
+ /* internal TX delay provided by the PHY, the MAC
|
|
+ * should not add an TX delay in this case
|
|
+ */
|
|
+ case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
+ cfg |= CLKRX_BYP;
|
|
+ break;
|
|
+ }
|
|
writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL);
|
|
|
|
/* Enable compensation controller and force the
|