mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
92b3efec54
Sort patches according to target/linux/generic/PATCHES. Additionally: - replace hashes in backported patches with the ones from main Linux tree - add descriptions to some patches Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> [remove 004-add_sata_disk_activity_trigger.patch separately] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
124 lines
3.8 KiB
Diff
124 lines
3.8 KiB
Diff
From 5169a9851daaa2782a7bd2bb83d5b1bd224b2879 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
|
|
Date: Thu, 30 Apr 2020 10:06:18 +0200
|
|
Subject: [PATCH] PCI: aardvark: Issue PERST via GPIO
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Add support for issuing PERST via GPIO specified in 'reset-gpios'
|
|
property (as described in PCI device tree bindings).
|
|
|
|
Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected
|
|
after reboot when PERST is not issued during driver initialization.
|
|
|
|
If bootloader already enabled link training then issuing PERST has no
|
|
effect for some buggy cards (e.g. Compex WLE900VX) and these cards are
|
|
not detected. We therefore clear the LINK_TRAINING_EN register before.
|
|
|
|
It was observed that Compex WLE900VX card needs to be in PERST reset
|
|
for at least 10ms if bootloader enabled link training.
|
|
|
|
Tested on Turris MOX.
|
|
|
|
Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org
|
|
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
|
|
Signed-off-by: Pali Rohár <pali@kernel.org>
|
|
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
---
|
|
drivers/pci/controller/pci-aardvark.c | 43 ++++++++++++++++++++++++++-
|
|
1 file changed, 42 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/pci/controller/pci-aardvark.c
|
|
+++ b/drivers/pci/controller/pci-aardvark.c
|
|
@@ -9,6 +9,7 @@
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
+#include <linux/gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
@@ -17,6 +18,7 @@
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_address.h>
|
|
+#include <linux/of_gpio.h>
|
|
#include <linux/of_pci.h>
|
|
|
|
#include "../pci.h"
|
|
@@ -204,6 +206,7 @@ struct advk_pcie {
|
|
int root_bus_nr;
|
|
int link_gen;
|
|
struct pci_bridge_emul bridge;
|
|
+ struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static inline void advk_writel(struct advk_pcie *pcie, u32 val, u64 reg)
|
|
@@ -330,10 +333,31 @@ err:
|
|
dev_err(dev, "link never came up\n");
|
|
}
|
|
|
|
+static void advk_pcie_issue_perst(struct advk_pcie *pcie)
|
|
+{
|
|
+ u32 reg;
|
|
+
|
|
+ if (!pcie->reset_gpio)
|
|
+ return;
|
|
+
|
|
+ /* PERST does not work for some cards when link training is enabled */
|
|
+ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
|
|
+ reg &= ~LINK_TRAINING_EN;
|
|
+ advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
|
|
+
|
|
+ /* 10ms delay is needed for some cards */
|
|
+ dev_info(&pcie->pdev->dev, "issuing PERST via reset GPIO for 10ms\n");
|
|
+ gpiod_set_value_cansleep(pcie->reset_gpio, 1);
|
|
+ usleep_range(10000, 11000);
|
|
+ gpiod_set_value_cansleep(pcie->reset_gpio, 0);
|
|
+}
|
|
+
|
|
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
|
|
{
|
|
u32 reg;
|
|
|
|
+ advk_pcie_issue_perst(pcie);
|
|
+
|
|
/* Set to Direct mode */
|
|
reg = advk_readl(pcie, CTRL_CONFIG_REG);
|
|
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
|
|
@@ -406,7 +430,8 @@ static void advk_pcie_setup_hw(struct ad
|
|
|
|
/*
|
|
* PERST# signal could have been asserted by pinctrl subsystem before
|
|
- * probe() callback has been called, making the endpoint going into
|
|
+ * probe() callback has been called or issued explicitly by reset gpio
|
|
+ * function advk_pcie_issue_perst(), making the endpoint going into
|
|
* fundamental reset. As required by PCI Express spec a delay for at
|
|
* least 100ms after such a reset before link training is needed.
|
|
*/
|
|
@@ -1093,6 +1118,22 @@ static int advk_pcie_probe(struct platfo
|
|
return ret;
|
|
}
|
|
|
|
+ pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
|
|
+ "reset-gpios", 0,
|
|
+ GPIOD_OUT_LOW,
|
|
+ "pcie1-reset");
|
|
+ ret = PTR_ERR_OR_ZERO(pcie->reset_gpio);
|
|
+ if (ret) {
|
|
+ if (ret == -ENOENT) {
|
|
+ pcie->reset_gpio = NULL;
|
|
+ } else {
|
|
+ if (ret != -EPROBE_DEFER)
|
|
+ dev_err(dev, "Failed to get reset-gpio: %i\n",
|
|
+ ret);
|
|
+ return ret;
|
|
+ }
|
|
+ }
|
|
+
|
|
ret = of_pci_get_max_link_speed(dev->of_node);
|
|
if (ret <= 0 || ret > 3)
|
|
pcie->link_gen = 3;
|