openwrt/target/linux/realtek/dts/rtl8380_netgear_gigabit.dtsi
Stijn Segers 41a8bea72e realtek: rename partitions in Netgear DTSI
Switch the Netgear DTSI for the Realtek target from the OEM partition
naming scheme to accepted OpenWrt naming practices. A quick git grep for
'u-boot-env' e.g. in the OpenWrt tree turns up almost 500 hits whereas
grepping for 'bdinfo' (the OEM equivalent) returns a meagre 14.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
(cherry picked from commit 1601b39b61)
2021-04-18 12:06:53 +02:00

138 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rtl838x.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "realtek,rtl838x-soc";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
mode {
label = "reset";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio0 {
indirect-access-bus-id = <0>;
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0x00e0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0x00e0000 0x0010000>;
read-only;
};
partition@f0000 {
label = "u-boot-env2";
reg = <0x00f0000 0x0010000>;
read-only;
};
partition@100000 {
label = "jffs";
reg = <0x0100000 0x0100000>;
read-only;
};
partition@200000 {
label = "jffs2";
reg = <0x0200000 0x0100000>;
read-only;
};
partition@300000 {
label = "firmware";
compatible = "openwrt,uimage", "denx,uimage";
openwrt,ih-magic = <0x4e474520>;
reg = <0x0300000 0x0e80000>;
};
partition@1180000 {
label = "runtime2";
reg = <0x1180000 0x0e80000>;
read-only;
};
};
};
};
&ethernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
regmap = <&ethernet0>;
#address-cells = <1>;
#size-cells = <0>;
INTERNAL_PHY(8)
INTERNAL_PHY(9)
INTERNAL_PHY(10)
INTERNAL_PHY(11)
INTERNAL_PHY(12)
INTERNAL_PHY(13)
INTERNAL_PHY(14)
INTERNAL_PHY(15)
};
};
&switch0 {
ports {
#address-cells = <1>;
#size-cells = <0>;
SWITCH_PORT(8, 1, internal)
SWITCH_PORT(9, 2, internal)
SWITCH_PORT(10, 3, internal)
SWITCH_PORT(11, 4, internal)
SWITCH_PORT(12, 5, internal)
SWITCH_PORT(13, 6, internal)
SWITCH_PORT(14, 7, internal)
SWITCH_PORT(15, 8, internal)
port@28 {
ethernet = <&ethernet0>;
reg = <28>;
phy-mode = "internal";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};