mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
924a5aabc7
Add support for NXP LS1028ARDB reference board. It's a dual core Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are connected to MSCC Felix switch). The original layout of NXP board has been kept but firmware images are adapted to be more sysupgrade friendly. At the moment NOR and SD boots are supported. NOR flash instructions: * make sd card with sdboot image * boot * write firmware image to spi flash $ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb- squashfs-firmware.bin /dev/mtd0 * change jumper to NOR boot and reset V3: * Added board specific network defaults for lan/wan v2: * Added INA220 curent monitor, PCF2129 RTC clock and NXP SA56004ED temperature sensor to default packages * removed compat fixups for thist board Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
454 lines
14 KiB
Makefile
454 lines
14 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright 2018-2020 NXP
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
IMAGES := firmware.bin sysupgrade.bin
|
|
FILESYSTEMS := squashfs
|
|
KERNEL := kernel-bin | gzip | uImage gzip
|
|
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_LOADADDR := 0x80000000
|
|
DEVICE_DTS = freescale/$(subst _,-,$(1))
|
|
IMAGE_SIZE := 64m
|
|
IMAGE/sysupgrade.bin = \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 1M | \
|
|
append-kernel | pad-to 17M | \
|
|
append-rootfs | pad-rootfs | \
|
|
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
|
endef
|
|
|
|
define Device/fsl-sdboot
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
IMAGES := sdcard.img.gz sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/fsl_ls1012a-frdm
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRDM-LS1012A
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
trusted-firmware-a-ls1012a-frdm \
|
|
kmod-ppfe
|
|
BLOCKSIZE := 256KiB
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append pfe.itb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to $$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
IMAGE/sysupgrade.bin := \
|
|
append-kernel | pad-to $$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | \
|
|
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
|
KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1012a-frdm
|
|
|
|
define Device/fsl_ls1012a-rdb
|
|
$(Device/fix-sysupgrade)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1012A-RDB
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
trusted-firmware-a-ls1012a-rdb \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-iio-fxas21002c-i2c \
|
|
kmod-iio-fxos8700-i2c \
|
|
kmod-ppfe
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append pfe.itb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1012a-rdb
|
|
|
|
define Device/fsl_ls1012a-frwy-sdboot
|
|
$(Device/rework-sdcard-images)
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRWY-LS1012A
|
|
DEVICE_PACKAGES += \
|
|
layerscape-ppfe \
|
|
trusted-firmware-a-ls1012a-frwy-sdboot \
|
|
kmod-ppfe
|
|
DEVICE_DTS := freescale/fsl-ls1012a-frwy
|
|
IMAGES += firmware.bin
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 128K | \
|
|
ls-append pfe.itb | pad-to 384K | \
|
|
ls-append $(1)-fip.bin | pad-to 1856K | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
|
|
check-size 2097153
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
|
|
|
|
define Device/fsl_ls1028a-rdb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1028A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_DTS := freescale/fsl-ls1028a-rdb
|
|
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
DEVICE_PACKAGES += \
|
|
trusted-firmware-a-ls1028a-rdb \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90 \
|
|
kmod-rtc-pcf2127
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
|
append-kernel | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
IMAGE/sysupgrade.bin := \
|
|
append-kernel | \
|
|
append-rootfs | pad-rootfs | \
|
|
check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1028a-rdb
|
|
|
|
define Device/fsl_ls1028a-rdb-sdboot
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1028A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_DTS := freescale/fsl-ls1028a-rdb
|
|
DEVICE_PACKAGES += \
|
|
trusted-firmware-a-ls1028a-rdb-sdboot \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90 \
|
|
kmod-rtc-pcf2127
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1028a-rdb-sdboot
|
|
|
|
define Device/fsl_ls1043a-rdb
|
|
$(Device/fix-sysupgrade)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1043A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1043a-rdb \
|
|
fmc fmc-eth-config \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1043a-rdb
|
|
|
|
define Device/fsl_ls1043a-rdb-sdboot
|
|
$(Device/rework-sdcard-images)
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1043A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1043a-rdb-sdboot \
|
|
fmc fmc-eth-config \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append fsl_ls1043a-rdb-fman.bin | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
|
|
|
|
define Device/fsl_ls1046a-frwy
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRWY-LS1046A
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1046a-frwy
|
|
DEVICE_DTS := freescale/fsl-ls1046a-frwy
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1046a-frwy
|
|
|
|
define Device/fsl_ls1046a-frwy-sdboot
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := FRWY-LS1046A
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1046a-frwy-sdboot
|
|
DEVICE_DTS := freescale/fsl-ls1046a-frwy
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1046a-frwy-sdboot
|
|
|
|
define Device/fsl_ls1046a-rdb
|
|
$(Device/fix-sysupgrade)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1046A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1046a-rdb \
|
|
fmc fmc-eth-config \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1046a-rdb
|
|
|
|
define Device/fsl_ls1046a-rdb-sdboot
|
|
$(Device/rework-sdcard-images)
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1046A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
trusted-firmware-a-ls1046a-rdb-sdboot \
|
|
fmc fmc-eth-config \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
|
ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
|
|
|
|
define Device/fsl_ls1088a-rdb
|
|
$(Device/fix-sysupgrade)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1088A-RDB
|
|
DEVICE_VARIANT := Default
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc \
|
|
layerscape-dpl \
|
|
trusted-firmware-a-ls1088a-rdb \
|
|
restool \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1088a-rdb
|
|
|
|
define Device/fsl_ls1088a-rdb-sdboot
|
|
$(Device/rework-sdcard-images)
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS1088A-RDB
|
|
DEVICE_VARIANT := SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc \
|
|
layerscape-dpl \
|
|
trusted-firmware-a-ls1088a-rdb-sdboot \
|
|
restool \
|
|
kmod-ahci-qoriq \
|
|
kmod-hwmon-ina2xx \
|
|
kmod-hwmon-lm90
|
|
DEVICE_DTS := freescale/fsl-ls1088a-rdb
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
|
|
ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
|
|
ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
|
|
|
|
define Device/fsl_ls2088a-rdb
|
|
$(Device/fix-sysupgrade)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LS2088ARDB
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc \
|
|
layerscape-dpl \
|
|
trusted-firmware-a-ls2088a-rdb \
|
|
restool \
|
|
kmod-ahci-qoriq
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_ls2088a-rdb
|
|
|
|
define Device/fsl_lx2160a-rdb
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LX2160A-RDB
|
|
DEVICE_VARIANT := Rev2.0 silicon
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc \
|
|
layerscape-dpl \
|
|
layerscape-ddr-phy \
|
|
trusted-firmware-a-lx2160a-rdb \
|
|
restool
|
|
IMAGE/firmware.bin := \
|
|
ls-clean | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 8M | \
|
|
ls-append $(1)-fip_ddr_all.bin | pad-to 10M | \
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
append-kernel | pad-to 32M | \
|
|
append-rootfs | pad-rootfs | check-size
|
|
endef
|
|
TARGET_DEVICES += fsl_lx2160a-rdb
|
|
|
|
define Device/fsl_lx2160a-rdb-sdboot
|
|
$(Device/fsl-sdboot)
|
|
DEVICE_VENDOR := NXP
|
|
DEVICE_MODEL := LX2160A-RDB
|
|
DEVICE_VARIANT := Rev2.0 silicon SD Card Boot
|
|
DEVICE_PACKAGES += \
|
|
layerscape-mc \
|
|
layerscape-dpl \
|
|
layerscape-ddr-phy \
|
|
trusted-firmware-a-lx2160a-rdb-sdboot \
|
|
restool
|
|
DEVICE_DTS := freescale/fsl-lx2160a-rdb
|
|
IMAGE/sdcard.img.gz := \
|
|
ls-clean | \
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
ls-append $(1)-uboot-env.bin | pad-to 8M | \
|
|
ls-append fsl_lx2160a-rdb-fip_ddr_all.bin | pad-to 10M | \
|
|
ls-append fsl_lx2160a-rdb-mc.itb | pad-to 13M | \
|
|
ls-append fsl_lx2160a-rdb-dpl.dtb | pad-to 14M | \
|
|
ls-append fsl_lx2160a-rdb-dpc.dtb | pad-to 16M | \
|
|
ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
|
|
endef
|
|
TARGET_DEVICES += fsl_lx2160a-rdb-sdboot
|
|
|
|
define Device/traverse_ls1043
|
|
DEVICE_VENDOR := Traverse
|
|
DEVICE_MODEL := LS1043 Boards
|
|
KERNEL_NAME := Image
|
|
KERNEL_SUFFIX := -kernel.itb
|
|
KERNEL_INSTALL := 1
|
|
FDT_LOADADDR = 0x90000000
|
|
FILESYSTEMS := ubifs
|
|
MKUBIFS_OPTS := -m 1 -e 262016 -c 128
|
|
DEVICE_PACKAGES += \
|
|
layerscape-fman \
|
|
uboot-envtools \
|
|
kmod-i2c-mux-pca954x \
|
|
kmod-hwmon-core \
|
|
kmod-gpio-pca953x kmod-input-gpio-keys-polled \
|
|
kmod-rtc-isl1208
|
|
DEVICE_DESCRIPTION = \
|
|
Build images for Traverse LS1043 boards. This generates a single image \
|
|
capable of booting on any of the boards in this family.
|
|
DEVICE_DTS = freescale/traverse-ls1043s
|
|
DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
|
|
DEVICE_DTS_CONFIG = ls1043s
|
|
KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
|
|
IMAGES = root sysupgrade.bin
|
|
IMAGE/root = append-rootfs
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
|
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
|
|
SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
|
|
endef
|
|
TARGET_DEVICES += traverse_ls1043
|