mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
271456abd8
These devices do not use rgmii2 as gpio, therefore remove rgmii2 pin group from state-default. Remove overwriting the ethernet node for these devices. Move claiming the rgmii2 group from mt7621_zyxel_nwa-ax.dtsi to mt7621_zyxel_nwa50ax.dts as it's only the latter using rgmii2 pins as gpio. Remove duplicate ethernet overwrite from mt7621_tplink_archer-x6-v3.dtsi. Claim rgmii2 group as gpio on mt7621_bolt_arion.dts as it uses an rgmii2 pin, 26, as gpio. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
148 lines
2.2 KiB
Plaintext
148 lines
2.2 KiB
Plaintext
#include "mt7621.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
aliases {
|
|
label-mac-device = &gmac0;
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
mediatek,nmbm;
|
|
mediatek,bmt-max-ratio = <15>;
|
|
mediatek,bmt-max-reserved-blocks = <64>;
|
|
mediatek,bmt-remap-range =
|
|
<0x0 0x980000>,
|
|
<0x2980000 0x7800000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "u-boot-env";
|
|
reg = <0x80000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@100000 {
|
|
label = "factory";
|
|
reg = <0x100000 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@180000 {
|
|
label = "firmware";
|
|
reg = <0x180000 0x2800000>;
|
|
|
|
/* This concatenates kernel1 & kernel2 & rootfs */
|
|
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x0 0x800000>;
|
|
};
|
|
|
|
partition@400000 {
|
|
label = "ubi";
|
|
reg = <0x800000 0x2000000>;
|
|
};
|
|
};
|
|
|
|
partition@2980000 {
|
|
label = "zy_firmware_1";
|
|
reg = <0x2980000 0x2800000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@5180000 {
|
|
label = "zy_rootfs_data";
|
|
reg = <0x5180000 0x1400000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@6580000 {
|
|
label = "zy_logs";
|
|
reg = <0x6580000 0xd00000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@7280000 {
|
|
label = "myzyxel";
|
|
reg = <0x7280000 0x480000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@7700000 {
|
|
label = "bootconfig";
|
|
reg = <0x7700000 0x80000>;
|
|
};
|
|
|
|
mrd: partition@7780000 {
|
|
label = "mrd";
|
|
reg = <0x7780000 0x80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
wlan_5g: wifi@0,0 {
|
|
reg = <0x0 0 0 0 0>;
|
|
compatible = "mediatek,mt76";
|
|
|
|
mediatek,mtd-eeprom = <&factory 0x0>;
|
|
|
|
/* MAC-Address set in userspace */
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
nvmem-cells = <&macaddr_mrd_1fff8>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
port@4 {
|
|
status = "okay";
|
|
label = "lan";
|
|
};
|
|
};
|
|
};
|
|
|
|
&mrd {
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_mrd_1fff8: macaddr@1fff8 {
|
|
reg = <0x1fff8 0x6>;
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "uart3";
|
|
function = "gpio";
|
|
};
|
|
};
|