mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
c98819a9e6
The "/dts-v1/;" identifier is supposed to be present once at the top of a device tree file after the includes have been processed. Like done for other targets recently, put the dts-v1 statement into the top-level SoC-based DTSI files, and remove all other occurences. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
222 lines
4.3 KiB
Plaintext
222 lines
4.3 KiB
Plaintext
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6328";
|
|
|
|
aliases {
|
|
nflash = &nflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi1 = &hsspi;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory { device_type = "memory"; reg = <0 0>; };
|
|
|
|
ubus@10000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&periph_intc>;
|
|
|
|
ext_intc: interrupt-controller@10000018 {
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0x10000018 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <24>, <25>, <26>, <27>;
|
|
};
|
|
|
|
periph_intc: interrupt-controller@10000020 {
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0x10000020 0x10>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
pinctrl: pin-controller@10000080 {
|
|
compatible = "brcm,bcm6328-pinctrl";
|
|
reg = <0x10000080 0x8>,
|
|
<0x10000088 0x8>,
|
|
<0x10000098 0x4>,
|
|
<0x1000009c 0xc>;
|
|
reg-names = "dirout", "dat", "mode", "mux";
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-parent = <&ext_intc>;
|
|
interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
|
|
interrupt-names = "gpio12", "gpio15",
|
|
"gpio23", "gpio24";
|
|
|
|
pinctrl_serial_led: serial_led {
|
|
pinctrl_serial_led_data: serial_led_data {
|
|
function = "serial_led_data";
|
|
pins = "gpio6";
|
|
};
|
|
|
|
pinctrl_serial_led_clk: serial_led_clk {
|
|
function = "serial_led_clk";
|
|
pins = "gpio7";
|
|
};
|
|
};
|
|
|
|
pinctrl_inet_act_led: inet_act_led {
|
|
function = "inet_act_led";
|
|
pins = "gpio11";
|
|
};
|
|
|
|
pinctrl_pcie_clkreq: pcie_clkreq {
|
|
function = "pcie_clkreq";
|
|
pins = "gpio16";
|
|
};
|
|
|
|
pinctrl_ephy0_spd_led: ephy0_spd_led {
|
|
function = "led";
|
|
pins = "gpio17";
|
|
};
|
|
|
|
pinctrl_ephy1_spd_led: ephy1_spd_led {
|
|
function = "led";
|
|
pins = "gpio18";
|
|
};
|
|
|
|
pinctrl_ephy2_spd_led: ephy2_spd_led {
|
|
function = "led";
|
|
pins = "gpio19";
|
|
};
|
|
|
|
pinctrl_ephy3_spd_led: ephy3_spd_led {
|
|
function = "led";
|
|
pins = "gpio20";
|
|
};
|
|
|
|
pinctrl_ephy0_act_led: ephy0_act_led {
|
|
function = "ephy0_act_led";
|
|
pins = "gpio25";
|
|
};
|
|
|
|
pinctrl_ephy1_act_led: ephy1_act_led {
|
|
function = "ephy1_act_led";
|
|
pins = "gpio26";
|
|
};
|
|
|
|
pinctrl_ephy2_act_led: ephy2_act_led {
|
|
function = "ephy2_act_led";
|
|
pins = "gpio27";
|
|
};
|
|
|
|
pinctrl_ephy3_act_led: ephy3_act_led {
|
|
function = "ephy3_act_led";
|
|
pins = "gpio28";
|
|
};
|
|
|
|
pinctrl_hsspi_cs1: hsspi_cs1 {
|
|
function = "hsspi_cs1";
|
|
pins = "hsspi_cs1";
|
|
};
|
|
|
|
pinctrl_usb_port1_device: usb_port1_device {
|
|
function = "usb_device_port";
|
|
pins = "usb_port1";
|
|
};
|
|
|
|
pinctrl_usb_port1_host: usb_port1_host {
|
|
function = "usb_host_port";
|
|
pins = "usb_port1";
|
|
};
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <28>;
|
|
|
|
/* clocks = <&periph_clk>; */
|
|
/* clock-names = "refclk"; */
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10000120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000120 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <39>;
|
|
|
|
/* clocks = <&periph_clk>; */
|
|
/* clock-names = "refclk"; */
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
nflash: nand@10000200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,nand-bcm6368",
|
|
"brcm,brcmnand-v2.2",
|
|
"brcm,brcmnand";
|
|
reg = <0x10000200 0x180>,
|
|
<0x10000400 0x200>,
|
|
<0x10000070 0x10>;
|
|
reg-names = "nand",
|
|
"nand-cache",
|
|
"nand-int-base";
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
leds: led-controller@10000800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6328-leds";
|
|
reg = <0x10000800 0x24>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsspi: spi@10001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6328-hsspi";
|
|
reg = <0x10001000 0x600>;
|
|
interrupts = <29>;
|
|
/* clocks = <&clkctl 9>; */
|
|
};
|
|
};
|
|
};
|