openwrt/target/linux/ramips/dts/mt7621_asus_rt-acx5p.dtsi
Adrian Schmutzler 1abb473cea ramips: remove phy0tpt trigger from RT-AC65P/RT-AC85P power LED
This patch removes a phy0tpt trigger from the power LED, which
seems to have been added by mistake.

WiFi LEDs using phy0radio and phy1radio triggers are present and
used correctly.

Cc: Birger Koblitz <mail@birger-koblitz.de>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-27 12:13:48 +01:00

159 lines
2.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus: palmbus@1E000000 {
i2c@900 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "rt-ac85p:blue:power";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "rt-ac85p:blue:wlan2g";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
wlan5g {
label = "rt-ac85p:blue:wlan5g";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
};
};
&sdhci {
status = "okay";
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x100000>;
read-only;
};
factory: partition@1e0000 {
label = "factory";
reg = <0x1e0000 0x100000>;
read-only;
};
factory2: partition@2e0000 {
label = "factory2";
reg = <0x2e0000 0x100000>;
read-only;
};
partition@3e0000 {
label = "kernel";
reg = <0x3e0000 0x400000>;
};
partition@7e0000 {
label = "ubi";
reg = <0x7e0000 0x2e00000>;
};
partition@35e0000 {
label = "firmware2";
reg = <0x35e0000 0x3200000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi0: wifi@0,0 {
compatible = "pci14c3,7615";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi1: wifi@0,0 {
compatible = "pci14c3,7615";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
mediatek,portmap = "wllll";
port@5 {
status = "disabled";
};
};
&i2c {
status = "disabled";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart2", "uart3", "i2c";
ralink,function = "gpio";
};
};
};