mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
863e79f8d5
The following patches were dropped because they are already applied upstream: 0012-pinctrl-lantiq-fix-up-pinmux.patch 0013-MTD-lantiq-xway-fix-invalid-operator.patch 0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch 0015-MTD-lantiq-xway-remove-endless-loop.patch 0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch 0017-MTD-xway-fix-nand-locking.patch 0044-pinctrl-lantiq-introduce-new-dedicated-devicetree-bi.patch 0045-pinctrl-lantiq-Fix-GPIO-Setup-of-GPIO-Port3.patch 0046-pinctrl-lantiq-2-pins-have-the-wrong-mux-list.patch 0047-irq-fixes.patch 0047-mtd-plat-nand-pass-of-node.patch 0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch 0120-MIPS-lantiq-add-support-for-device-tree-file-from-bo.patch 0121-MIPS-lantiq-make-it-possible-to-build-in-no-device-t.patch 122-MIPS-store-the-appended-dtb-address-in-a-variable.patch The PHY driver was reduced to the code adding the LED configuration, the rest is already upstream: 0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch The SPI driver was replaced with the version pending for upstream inclusion: New driver: 0090-spi-add-transfer_status-callback.patch 0091-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-controller.patch Old driver: 0100-spi-add-support-for-Lantiq-SPI-controller.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
203 lines
7.1 KiB
Diff
203 lines
7.1 KiB
Diff
From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001
|
|
From: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Date: Fri, 6 Jan 2017 17:40:12 +0100
|
|
Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization
|
|
|
|
This adds code to initialize the USB controller and PHY also on Danube,
|
|
Amazon SE and AR10. This code is based on the Vendor driver from
|
|
different UGW versions and compared to the hardware documentation.
|
|
|
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
---
|
|
arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++----------
|
|
arch/mips/lantiq/xway/sysctrl.c | 20 +++++++
|
|
2 files changed, 110 insertions(+), 30 deletions(-)
|
|
|
|
--- a/arch/mips/lantiq/xway/reset.c
|
|
+++ b/arch/mips/lantiq/xway/reset.c
|
|
@@ -72,6 +72,8 @@
|
|
#define RCU_USBCFG_HDSEL_BIT BIT(11)
|
|
#define RCU_USBCFG_HOST_END_BIT BIT(10)
|
|
#define RCU_USBCFG_SLV_END_BIT BIT(9)
|
|
+#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17)
|
|
+
|
|
|
|
/* USB reset bits */
|
|
#define RCU_USBRESET 0x0010
|
|
@@ -85,6 +87,8 @@
|
|
|
|
#define RCU_CFG1A 0x0038
|
|
#define RCU_CFG1B 0x003C
|
|
+#define RCU_CFG1_TX_PEE BIT(0)
|
|
+#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */
|
|
|
|
/* USB PMU devices */
|
|
#define PMU_AHBM BIT(15)
|
|
@@ -306,38 +310,91 @@ static void ltq_usb_init(void)
|
|
/* Power for USB cores 1 & 2 */
|
|
ltq_pmu_enable(PMU_AHBM);
|
|
ltq_pmu_enable(PMU_USB0);
|
|
- ltq_pmu_enable(PMU_USB1);
|
|
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
|
|
+ if (of_machine_is_compatible("lantiq,ar10") ||
|
|
+ of_machine_is_compatible("lantiq,grx390") ||
|
|
+ of_machine_is_compatible("lantiq,ar9") ||
|
|
+ of_machine_is_compatible("lantiq,vr9"))
|
|
+ ltq_pmu_enable(PMU_USB1);
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,vr9") ||
|
|
+ of_machine_is_compatible("lantiq,ar10")) {
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE |
|
|
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE |
|
|
+ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B);
|
|
+ }
|
|
|
|
/* Enable USB PHY power for cores 1 & 2 */
|
|
ltq_pmu_enable(PMU_USB0_P);
|
|
- ltq_pmu_enable(PMU_USB1_P);
|
|
+ if (of_machine_is_compatible("lantiq,ar10") ||
|
|
+ of_machine_is_compatible("lantiq,grx390") ||
|
|
+ of_machine_is_compatible("lantiq,ar9") ||
|
|
+ of_machine_is_compatible("lantiq,vr9"))
|
|
+ ltq_pmu_enable(PMU_USB1_P);
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,ase") ||
|
|
+ of_machine_is_compatible("lantiq,danube")) {
|
|
+ /* Configure cores to host mode */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB1CFG);
|
|
+
|
|
+ /* Select DMA endianness (Host-endian: big-endian) */
|
|
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
|
|
+ }
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,ar9")) {
|
|
+ /* Configure cores to host mode */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB2CFG);
|
|
+
|
|
+ /* Select DMA endianness (Host-endian: big-endian) */
|
|
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
|
|
+ }
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,vr9") ||
|
|
+ of_machine_is_compatible("lantiq,ar10")) {
|
|
+ /* Configure cores to host mode */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
+ RCU_USB2CFG);
|
|
+
|
|
+ /* Select DMA endianness (Host-endian: big-endian) */
|
|
+ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
|
|
+ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
+ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
|
|
+ }
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,ar9")) {
|
|
+ /* Hard reset USB state machines */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
|
|
+ | USBRESET_BIT | BIT(28), RCU_USBRESET);
|
|
+ udelay(50 * 1000);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET)
|
|
+ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET);
|
|
+ } else {
|
|
+ /* Hard reset USB state machines */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
|
|
+ udelay(50 * 1000);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
|
|
+ }
|
|
|
|
- /* Configure cores to host mode */
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
- RCU_USB1CFG);
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
|
|
- RCU_USB2CFG);
|
|
-
|
|
- /* Select DMA endianness (Host-endian: big-endian) */
|
|
- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
|
|
- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
|
|
- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
|
|
-
|
|
- /* Hard reset USB state machines */
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
|
|
- udelay(50 * 1000);
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
|
|
-
|
|
- /* Soft reset USB state machines */
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
|
|
- udelay(50 * 1000);
|
|
- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
|
|
+ if (of_machine_is_compatible("lantiq,vr9")) {
|
|
+ /* Soft reset USB state machines */
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
+ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
|
|
+ udelay(50 * 1000);
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
|
|
+ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
|
|
+ }
|
|
}
|
|
|
|
static int __init mips_reboot_setup(void)
|
|
@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void
|
|
if (!ltq_rcu_membase)
|
|
panic("Failed to remap core memory");
|
|
|
|
- if (of_machine_is_compatible("lantiq,ar9") ||
|
|
- of_machine_is_compatible("lantiq,vr9"))
|
|
+ if (of_machine_is_compatible("lantiq,danube") ||
|
|
+ of_machine_is_compatible("lantiq,ase") ||
|
|
+ of_machine_is_compatible("lantiq,ar9") ||
|
|
+ of_machine_is_compatible("lantiq,vr9") ||
|
|
+ of_machine_is_compatible("lantiq,ar10"))
|
|
ltq_usb_init();
|
|
|
|
if (of_machine_is_compatible("lantiq,vr9"))
|
|
--- a/arch/mips/lantiq/xway/sysctrl.c
|
|
+++ b/arch/mips/lantiq/xway/sysctrl.c
|
|
@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk)
|
|
pr_warn("deactivating PMU module failed!");
|
|
}
|
|
|
|
+static void usb_set_clock(void)
|
|
+{
|
|
+ unsigned int val = ltq_cgu_r32(ifccr);
|
|
+
|
|
+ if (of_machine_is_compatible("lantiq,ar10") ||
|
|
+ of_machine_is_compatible("lantiq,grx390")) {
|
|
+ val &= ~0x03; /* XTAL divided by 3 */
|
|
+ } else if (of_machine_is_compatible("lantiq,ar9") ||
|
|
+ of_machine_is_compatible("lantiq,vr9")) {
|
|
+ /* TODO: this depends on the XTAL frequency */
|
|
+ val |= 0x03; /* XTAL divided by 3 */
|
|
+ } else if (of_machine_is_compatible("lantiq,ase")) {
|
|
+ val |= 0x20; /* from XTAL */
|
|
+ } else if (of_machine_is_compatible("lantiq,danube")) {
|
|
+ val |= 0x30; /* 12 MHz, generated from 36 MHz */
|
|
+ }
|
|
+ ltq_cgu_w32(val, ifccr);
|
|
+}
|
|
+
|
|
/* the pci enable helper */
|
|
static int pci_enable(struct clk *clk)
|
|
{
|
|
@@ -608,4 +627,5 @@ void __init ltq_soc_init(void)
|
|
|
|
if (of_machine_is_compatible("lantiq,vr9"))
|
|
xbar_fpi_burst_disable();
|
|
+ usb_set_clock();
|
|
}
|